Positron Annihilation Spectroscopy Study of Metallic Materials after High-Speed Cutting

During high-speed cutting, a white layer is often produced on the machined surfaces after mechanical machining, seriously affecting the mechanical properties. These properties are related to the material structure and the defects induced by cutting. However, there is a lack of research on the atomic-scale defects of the white layer. This paper studied the influence of cutting parameters, namely the feed rate, cutting speed and cutting depth, on atomic-scale defects induced by high-speed cutting in GCr15 steel. Positron annihilation studies showed typical plastically deformed or tempered carbon steel defects with additional vacancy cluster components. The quantity of these clusters changed with cutting parameters. Furthermore, significant changes were observed in the subsurface region up to 1 µm, occurring as a result of simultaneous phase transformations, deformation and thermal impacts. The predominant accumulation of only one type of atomic-scale defect was not observed

Microbial communities in terrestrial surface soils are not widely limited by carbon

18 páginas.- 5 figuras.- referencias.- Additional supporting information can be found online in the Supporting Information section at the end of this article https://doi.org/10.1111/gcb.16765Microbial communities in soils are generally considered to be limited by carbon (C), which could be a crucial control for basic soil functions and responses of microbial heterotrophic metabolism to climate change. However, global soil microbial C limitation (MCL) has rarely been estimated and is poorly understood. Here, we predicted MCL, defined as limited availability of substrate C relative to nitrogen and/or phosphorus to meet microbial metabolic requirements, based on the thresholds of extracellular enzyme activity across 847 sites (2476 observations) representing global natural ecosystems. Results showed that only about 22% of global sites in terrestrial surface soils show relative C limitation in microbial community. This finding challenges the conventional hypothesis of ubiquitous C limitation for soil microbial metabolism. The limited geographic extent of C limitation in our study was mainly attributed to plant litter, rather than soil organic matter that has been processed by microbes, serving as the dominant C source for microbial acquisition. We also identified a significant latitudinal pattern of predicted MCL with larger C limitation at mid- to high latitudes, whereas this limitation was generally absent in the tropics. Moreover, MCL significantly constrained the rates of soil heterotrophic respiration, suggesting a potentially larger relative increase in respiration at mid- to high latitudes than low latitudes, if climate change increases primary productivity that alleviates MCL at higher latitudes. Our study provides the first global estimates of MCL, advancing our understanding of terrestrial C cycling and microbial metabolic feedback under global climate change.This study was financially supported by the National Natural Science Foundation of China (32101378) and Project funded by the China Postdoctoral Science Foundation (2022M710004)Peer reviewe

Melatonin enhances TNF-α-mediated cervical cancer HeLa cells death via suppressing CaMKII/Parkin/mitophagy axis

Abstract Background Tumor necrosis factor-α (TNF-α) immunotherapy controls the progression of human cervical cancer. Here, we explored the detailed molecular mechanisms played by melatonin in human cervical cancer (HeLa cells) death in the presence of TNF-α injury, with a particular attention to the mitochondrial homeostasis. Methods HeLa cells were incubated with TNFα and then cell death was determined via MTT assay, TUNEL staining, caspase ELISA assay and western blotting. Mitochondrial function was detected via analyzing mitochondrial membrane potential using JC-1 staining, mitochondrial oxidative stress using flow cytometry and mitochondrial apoptosis using western blotting. Results Our data exhibited that treatment with HeLa cells using melatonin in the presence of TNF-α further triggered cancer cell cellular death. Molecular investigation demonstrated that melatonin enhanced the caspase-9 mitochondrion death, repressed mitochondrial potential, increased ROS production, augmented mPTP opening rate and elevated cyt-c expression in the nucleus. Moreover, melatonin application further suppressed mitochondrial ATP generation via reducing the expression of mitochondrial respiratory complex. Mechanistically, melatonin augmented the response of HeLa cells to TNF-α-mediated cancer death via repressing mitophagy. TNF-α treatment activated mitophagy via elevating Parkin expression and excessive mitophagy blocked mitochondrial apoptosis, ultimately alleviating the lethal action of TNF-α on HeLa cell. However, melatonin supplementation could prevent TNF-α-mediated mitophagy activation via inhibiting Parkin in a CaMKII-dependent manner. Interestingly, reactivation of CaMKII abolished the melatonin-mediated mitophagy arrest and HeLa cell death. Conclusions Overall, our data highlight that melatonin enhances TNF-α-induced human cervical cancer HeLa cells mitochondrial apoptosis via inactivating the CaMKII/Parkin/mitophagy axis

Perovskite Solar Cells Fabricated by Using an Environmental Friendly Aprotic Polar Additive of 1,3-Dimethyl-2-imidazolidinone

Abstract Perovskite solar cells (PSCs) have great potentials in photovoltaics due to their high power conversion efficiency and low processing cost. PSCs are usually fabricated from PbI2/dimethylformamide solution with some toxic additives, such as N-methyl pyrrolidone and hexamethylphosphoramide. Here, we use an environmental friendly aprotic polar solvent, 1,3-dimethyl-2-imidazolidinone (DMI), to fabricate perovskite films. By adding 10 vol% DMI in the precursor solution, high-quality perovskite films with smooth surface are obtained. By increasing annealing temperature from 100 to 130 °C, the average grain size of the perovskite increases from ~ 216 to 375 nm. As a result, the efficiency of the PSCs increases from 10.72 to 14.54%

Positron Annihilation Spectroscopy Study of Metallic Materials after High-Speed Cutting

During high-speed cutting, a white layer is often produced on the machined surfaces after mechanical machining, seriously affecting the mechanical properties. These properties are related to the material structure and the defects induced by cutting. However, there is a lack of research on the atomic-scale defects of the white layer. This paper studied the influence of cutting parameters, namely the feed rate, cutting speed and cutting depth, on atomic-scale defects induced by high-speed cutting in GCr15 steel. Positron annihilation studies showed typical plastically deformed or tempered carbon steel defects with additional vacancy cluster components. The quantity of these clusters changed with cutting parameters. Furthermore, significant changes were observed in the subsurface region up to 1 µm, occurring as a result of simultaneous phase transformations, deformation and thermal impacts. The predominant accumulation of only one type of atomic-scale defect was not observed