A Consulting Model of Global Service Learning

Service Learning is increasingly common in collegiate Computer Science and Information Systems curricula. Typically students work in real-world situations, applying their skills to address authentic community needs. Students’ reports of learning benefits and positive feelings about their experiences are well recorded in the literature on service learning. The value of project outcomes to the community partner are often assumed and less commonly assessed. Recent research indicates that partner outcomes may often be less than satisfactory, and in fact, even detrimental when students execute ‘one off’ projects requiring resources, skills and maintenance that community partners may not be able to provide. This report describes a consulting model of service learning that highlights sustainable solutions as a key objective. Results from repeated service learning engagements with a global partner organization illustrate application of the consulting model

Investigation of thermal resistance and power consumption in Ga-doped indium oxide (In2O3) nanowire phase change random access memory

The resistance stability and thermal resistance of phase change memory devices using similar to 40 nm diameter Ga-doped In2O3 nanowires (Ga:In2O3 NW) with different Ga-doping concentrations have been investigated. The estimated resistance stability (R(t)/R-0 ratio) improves with higher Ga concentration and is dependent on annealing temperature. The extracted thermal resistance (R-th) increases with higher Ga-concentration and thus the power consumption can be reduced by similar to 90% for the 11.5% Ga: In2O3 NW, compared to the 2.1% Ga: In2O3 NW. The excellent characteristics of Ga-doped In2O3 nanowire devices offer an avenue to develop low power and reliable phase change random access memory applications. (C) 2014 AIP Publishing LLC.X113sciescopu

Continuum understanding of twin formation near grain boundaries of FCC metals with low stacking fault energy

Deformation twinning from grain boundaries is often observed in face-centered cubic metals with low stacking fault energy. One of the possible factors that contribute to twinning origination from grain boundaries is the intergranular interactions during deformation. Nonetheless, the influence of mechanical interaction among grains on twin evolution has not been fully understood. In spite of extensive experimental and modeling efforts on correlating microstructural features with their twinning behavior, a clear relation among the large aggregate of grains is still lacking. In this work, we characterize the micromechanics of grain-to-grain interactions that contribute to twin evolution by investigating the mechanical twins near grain boundaries using a full-field crystal plasticity simulation of a twinning-induced plasticity steel deformed in uniaxial tension at room temperature. Microstructures are first observed through electron backscatter diffraction technique to obtain data to reconstruct a statistically equivalent microstructure through synthetic microstructure building. Grain-to-grain micromechanical response is analyzed to assess the collective twinning behavior of the microstructural volume element under tensile deformation. Examination of the simulated results reveal that grain interactions are capable of changing the local mechanical behavior near grain boundaries by transferring strain across grain boundary or localizing strain near grain boundary.116Ysciescopu

Performance Improvement of a High Side Scroll Compressor by Thrust Surface Oil Groove

Performance analysis has been carried out on a high side scroll compressor having a fixed scroll equipped with a circular oil groove on its thrust surface. Oil is supplied to the oil groove through an intermittent opening from a high pressure oil reservoir formed inside the orbiting scroll hub. Oil in the groove is then delivered to both suction and back pressure chambers by pressure differentials and viscous pumping action of the orbiting scroll base plate. Mathematical modeling of this oil groove system has been incorporated into main compressor performance simulation program for optimum oil groove design. Pressure in the oil groove can be controlled by changing the oil passage area and oil groove configuration. With an enlarged oil passage, pressure in the oil groove increases due to increased flow rate, but pressure increase in the back pressure chamber is not that large, resulting in reduced friction loss at the thrust surface between the two scrolls. On the other hand, by increasing the oil passage area, oil content in the refrigerant flow increases, and the orbiting scroll stability could be negatively affected by oil groove pressure increase. Considering all these factors, EER could be improved by about 3.6% at ARI condition by optimum oil groove design

Prevalence of sarcopenia and sarcopenic obesity in Korean adults: The Korean Sarcopenic Obesity Study (KSOS)

*Context:* Sarcopenic obesity (SO), a combination of excess weight and reduced muscle mass and/or strength, is suggested to be associated with an increased risk of adverse health outcomes. 
*Objectives:* To examine the prevalence and characteristics of Sarcopenic and SO defined by using different indices such as Appendicular Skeletal muscle Mass (ASM)/height^2^ and Skeletal Muscle Index (SMI (%): skeletal muscle mass (kg)/weight (kg) × 100) for Korean adults. 
*Methods:* 591 participants were recruited from the Korean Sarcopenic Obesity Study (KSOS) which is an ongoing prospective observational cohort study. Analysis was conducted in 526 participants (328 women, 198 men) who had complete data on body composition using Dual X-ray absorptiometry and computed tomography. 
*Results:* The prevalence of sarcopenia and SO increases with aging. Using two or more standard deviations (SD) of ASM/height^2^ below reference values from young, healthy adults as a definition of sarcopenia, the prevalence of sarcopenia and SO was 6.3% and 1.3% in men and 4.1% and 1.7% in women over 60 years of age. However, using two or more SD of SMI, the prevalence of sarcopenia and SO was 5.1% and 5.1% respectively in men and 14.2% and 12.5% respectively in women. As defined by SMI, subjects with SO had 3 times the risk of metabolic syndrome (OR = 3.03, 95% confidence interval (CI) = 1.26-7.26) and subjects with non-sarcopenic obesity had approximately 2 times the risk of metabolic syndrome (OR = 1.89, 95% CI = 1.18-3.02) compared with normal subjects. 
*Conclusion:* Obese subjects with relative sarcopenia were associated with a greater likelihood for metabolic syndrome. As Koreans were more obese and aging, the prevalence of SO and its impact on health outcomes are estimated to be rapidly grow. Further research is requested to establish the definition, cause and consequences of SO.
&#xa

Analysis of Initial Baseline Clinical Parameters and Treatment Strategy Associated with Medication Failure in the Treatment of Benign Prostatic Hyperplasia in Korea

Purpose To analyze the baseline clinical factors and medication treatment strategy used in cases with medication treatment failure of benign prostatic hyperplasia (BPH). Methods From January 2006 to December 2009, 677 BPH patients with at least 3 months of treatment with medication were enrolled. We analyzed clinical factors by medication failure (n=161) versus maintenance (n=516), by prostate size (less than 30 g, n=231; 30 to 50 g, n=244; greater than 50 g, n=202), and by prostate-specific antigen (PSA) levels (less than 1.4 ng/mL, n=324; more than 1.4 ng/mL, n=353). Results Age, combination medication rate, PSA, and prostate volume were statistically different between the medication treatment failure and maintenance groups. By prostate size, the PSA and medication failure rates were relatively higher and the medication period was shorter in patients with a prostate size of more than 30 g. The combination medication rate was higher in patients with a prostate size of more than 50 g. The medication failure rate and prostate volume were higher in patients with a PSA level of more than 1.4 ng/mL. However, the combination treatment rate was not significantly different in patients with a PSA level lower than 1.4 ng/mL. Suggestive cutoffs for combination medication are a prostate volume of 34 g and PSA level of 1.9 ng/mL. Conclusions The clinical factors associated with medication failure were age, treatment type, and prostate volume. Combination therapy should be considered more in Korea in patients with a PSA level higher than 1.4 ng/mL and a prostate volume of between 30 and 50 g to prevent medication failure

Retrospective Analysis of Peripheral Blood Stem Cell Transplantation for the Treatment of High-Risk Neuroblastoma

Disease relapse after autologous peripheral blood stem cell transplantation (APBSCT) is the main cause of treatment failure in high-risk neuroblastoma (NBL). To reduce relapse, various efforts have been made such as CD34+ selection and double APBSCT. Here the authors reviewed the clinical features and outcomes of high-risk NBL patients and analyzed their survival. The medical records of 36 patients with stage III or IV NBL who underwent APBSCT at Seoul National University Children's Hospital between May 1996 and May 2004 were reviewed. Total 46 APBSCTs were performed in 36 patients. Disease free survival (DFS) and overall survival of all patients were 47.7% and 68.8%, respectively. The patients were allocated to three groups according to the APBSCT type. The DFS of CD34+ non-selected single APBSCT patients (N=13), CD34+ selected single APBSCT patients (N=14), and CD34+ selected double APBSCT patients (N=9) were 55.6%, 40.6%, and 50.0%, respectively, which were not significantly different. Thus the survival was not found to be affected by CD34+ selection or transplantation number. To improve long-term survival, various efforts should be made such as chemotherapy dose intensification, more effective tumor purging, and control of minimal residual disease via the use of differentiating and immune-modulating agents

Successful mobilization using a combination of plerixafor and G-CSF in pediatric patients who failed previous chemomobilization with G-CSF alone and possible complications of the treatment

Peripheral blood stem cell (PBSC) mobilization, which uses plerixafor (AMD 3100), a newly developed specific inhibitor of the CXCR4 receptor, in combination with granulocyte-colony stimulating factor(G-CSF), has been shown to enhance the stem cell mobilization in adult patients, but pediatric data are scarce. We documented our experience with this drug in 6 Korean pediatric patients who had failed in chemomobilization, using G-CSF, alone. All patients were mobilized CD34+ cells (median, 11.08 × 106/kg: range, 6.34-28.97 × 106/kg) successfully within 2 to 3 cycles of apheresis, without complications. A total of 7 autologous transplantations were performed, including 1 tandem transplantation. However, 2 patients with brain tumors showed severe pulmonary complications, including spontaneous pneumomediastinum. This is the first study of PBSC mobilization with plerixafor in Asian pediatric patients. Furthermore our study suggests that mobilization with plerixafor may be effective in Korean pediatric patients, who have previously been heavily treated and have failed PBSC mobilization with classical chemomobilization, using G-CSF. However, further studies are needed to examine the possible complications of autologous transplantation, using a mobilized plerixafor product in children

Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 308 stainless steel filler metal

Funding Information: JS, JGL and JPO acknowledge Fundação para a Ciência e a Tecnologia (FCT - MCTES) for its financial support via the project UID/00667/2020 (UNIDEMI). JPO acknowledges funding by national funds from FCT - Fundação para a Ciência e a Tecnologia, I.P., in the scope of the projects LA/P/0037/2020, UIDP/50025/2020 and UIDB/50025/2020 of the Associate Laboratory Institute of Nanostructures, Nanomodelling and Nanofabrication – i3N. JS acknowledges the China Scholarship Council for funding the Ph.D. grant (CSC NO. 201808320394). JGL acknowledges Fundação para a Ciência e a Tecnologia (FCT-MCTES) for funding the Ph.D. Grant 2020.07350.BD. This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIP) (NRF-2022R1A5A1030054). The authors acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for the provision of experimental facilities. Beamtime was allocated for proposal I-20210899 EC. The research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. Funding Information: JS, JGL and JPO acknowledge Fundação para a Ciência e a Tecnologia (FCT - MCTES) for its financial support via the project UID/00667/2020 (UNIDEMI). JPO acknowledges funding by national funds from FCT - Fundação para a Ciência e a Tecnologia, I.P. , in the scope of the projects LA/P/0037/2020 , UIDP/50025/2020 and UIDB/50025/2020 of the Associate Laboratory Institute of Nanostructures, Nanomodelling and Nanofabrication – i3N. JS acknowledges the China Scholarship Council for funding the Ph.D. grant (CSC NO. 201808320394 ). JGL acknowledges Fundação para a Ciência e a Tecnologia (FCT-MCTES) for funding the Ph.D. Grant 2020.07350.BD . This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIP) ( NRF-2022R1A5A1030054 ). The authors acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for the provision of experimental facilities. Beamtime was allocated for proposal I-20210899 EC. The research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. Publisher Copyright: © 2022 The AuthorsIn this paper, gas metal arc welding of a CoCrFeMnNi high entropy alloy was performed using 308 stainless steel filler wire. Electron backscatter diffraction and synchrotron X-ray diffraction were used to determine the microstructural evolution, while microhardness mapping and non-contact digital image correlation were employed to assess the local mechanical response across the welded joints. Further, thermodynamic calculations were implemented to support the understanding of the microstructure evolution. Through a systematic analysis of the microstructure evolution and mechanical properties, it is established a correlation between welding process, microstructure and mechanical properties. Besides, this work lays the foundations for the use of low-cost arc-based welding technologies for successful joining and application of welded joints based on high entropy alloys.publishersversionpublishe