Chemical composition and structural changes of porous templates obtained by anodising aluminium in phosphoric acid electrolyte

Ordered anodic aluminium oxide (AAO) filmswere first prepared by anodising in a phosphoric acid electrolyte and then studied extensively and characterised by field emission gun-scanning electron microscopy (FEG-SEM), X-ray diffraction, Raman and infrared spectroscopy at a macroscopic scale. These analyses showed that the as-prepared AAO film is in fact amorphous, partially hydrated and that its initial global chemical composition can be described, in agreement with previous works, as: Al2O3, 0.186AlPO4 · 0.005H2O. Additional analyses (thermogravimetric analysis, differential thermal analysis and FEG-SEM) showed geometrical changes of the film structure at different scales, explained by various steps of dehydration and allotropic transformations of the resulting crystallised alumina. However, because their structure remains unchanged up to 900 ◦C, the phosphoric templates appear to be particularly suitable for applications or processes atmedium or high temperatures, such as the preparation of carbon nanotubes or oxide rods

Cobalt and Nickel Nanopillars on Aluminium Substrates by Direct Current Electrodeposition Process

A fast and cost-effective technique is applied for fabricating cobalt and nickel nanopillars on aluminium substrates. By applying an electrochemical process, the aluminium oxide barrier layer is removed from the pore bottom tips of nanoporous anodic alumina templates. So, cobalt and nickel nanopillars are fabricated into these templates by DC electrodeposition. The resulting nanostructure remains on the aluminium substrate. In this way, this method could be used to fabricate a wide range of nanostructures which could be integrated in new nanodevices

Fabrication of vertically aligned Pd nanowire array in AAO template by electrodeposition using neutral electrolyte

A vertically aligned Pd nanowire array was successfully fabricated on an Au/Ti substrate using an anodic aluminum oxide (AAO) template by a direct voltage electrodeposition method at room temperature using diluted neutral electrolyte. The fabrication of Pd nanowires was controlled by analyzing the current–time transient during electrodeposition using potentiostat. The AAO template and the Pd nanowires were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) methods and X-Ray diffraction (XRD). It was observed that the Pd nanowire array was standing freely on an Au-coated Ti substrate after removing the AAO template in a relatively large area of about 5 cm2, approximately 50 nm in diameter and 2.5 μm in length with a high aspect ratio. The nucleation rate and the number of atoms in the critical nucleus were determined from the analysis of current transients. Pd nuclei density was calculated as 3.55 × 108 cm−2. Usage of diluted neutral electrolyte enables slower growing of Pd nanowires owing to increase in the electrodeposition potential and thus obtained Pd nanowires have higher crystallinity with lower dislocations. In fact, this high crystallinity of Pd nanowires provides them positive effect for sensor performances especially

Controlling interferometric properties of nanoporous anodic aluminium oxide

A study of reflective interference spectroscopy [RIfS] properties of nanoporous anodic aluminium oxide [AAO] with the aim to develop a reliable substrate for label-free optical biosensing is presented. The influence of structural parameters of AAO including pore diameters, inter-pore distance, pore length, and surface modification by deposition of Au, Ag, Cr, Pt, Ni, and TiO2 on the RIfS signal (Fabry-Perot fringe) was explored. AAO with controlled pore dimensions was prepared by electrochemical anodization of aluminium using 0.3 M oxalic acid at different voltages (30 to 70 V) and anodization times (10 to 60 min). Results show the strong influence of pore structures and surface modifications on the interference signal and indicate the importance of optimisation of AAO pore structures for RIfS sensing. The pore length/pore diameter aspect ratio of AAO was identified as a suitable parameter to tune interferometric properties of AAO. Finally, the application of AAO with optimised pore structures for sensing of a surface binding reaction of alkanethiols (mercaptoundecanoic acid) on gold surface is demonstrated