Home range size variation in a recovering wolf population: evaluating the effect of environmental, demographic, and social factors

Home range size in mammals is a key ecological trait and an important parameter in conservation planning, and has been shown to be influenced by ecological, demographic and social factors in animal populations. Information on space requirements is especially important for carnivore species which range over very large areas and often come into direct conflict with human interest. We used long-term telemetry-location data from a recovering wolf population in Scandinavia to investigate variation in home range size in relation to environmental and social characteristics of the different packs. Wolves showed considerable variation in home range size, which ranged from 259 to 1,676 km(2). Although wolf density increased fourfold during the study period, we found no evidence that intraspecific competition influenced range size. Local variation in moose density, which was the main prey for most packs, did not influence wolf home range size. Home ranges increased with latitude and elevation and decreased with increased roe deer density. Although prey biomass alone did not influence range size, our data suggest that there is a correlation between habitat characteristics, choice of prey species and possible hunting success, which currently combine to shape home range size in Scandinavian wolves

Spatial patterns of large African cats : a large-scale study on density, home range size, and home range overlap of lions Panthera leo and leopards Panthera pardus

Spatial patterns of and competition for resources by territorial carnivores are typically explained by two hypotheses: 1) the territorial defence hypothesis and 2) the searching efficiency hypothesis. According to the territorial defence hypothesis, when food resources are abundant, carnivore densities will be high and home ranges small. In addition, carnivores can maximise their necessary energy intake with minimal territorial defence. At medium resource levels, larger ranges will be needed, and it will become more economically beneficial to defend resources against a lower density of competitors. At low resource levels, carnivore densities will be low and home ranges large, but resources will be too scarce to make it beneficial to defend such large territories. Thus, home range overlap will be minimal at intermediate carnivore densities. According to the searching efficiency hypothesis, there is a cost to knowing a home range. Larger areas are harder to learn and easier to forget, so carnivores constantly need to keep their cognitive map updated by regularly revisiting parts of their home ranges. Consequently, when resources are scarce, carnivores require larger home ranges to acquire sufficient food. These larger home ranges lead to more overlap among individuals' ranges, so that overlap in home ranges is largest when food availability is the lowest. Since conspecific density is low when food availability is low, this hypothesis predicts that overlap is largest when densities are the lowest. We measured home range overlap and used a novel method to compare intraspecific home range overlaps for lions Panthera leo (n = 149) and leopards Panthera pardus (n = 111) in Africa. We estimated home range sizes from telemetry location data and gathered carnivore density data from the literature. Our results did not support the territorial defence hypothesis for either species. Lion prides increased their home range overlap at conspecific lower densities whereas leopards did not. Lion pride changes in overlap were primarily due to increases in group size at lower densities. By contrast, the unique dispersal strategies of leopards led to reduced overlap at lower densities. However, when human-caused mortality was higher, leopards increased their home range overlap. Although lions and leopards are territorial, their territorial behaviour was less important than the acquisition of food in determining their space use. Such information is crucial for the future conservation of these two iconic African carnivores

ILC Reference Design Report Volume 1 - Executive Summary

The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2s^-1. This report is the Executive Summary (Volume I) of the four volume Reference Design Report. It gives an overview of the physics at the ILC, the accelerator design and value estimate, the detector concepts, and the next steps towards project realization.The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2s^-1. This report is the Executive Summary (Volume I) of the four volume Reference Design Report. It gives an overview of the physics at the ILC, the accelerator design and value estimate, the detector concepts, and the next steps towards project realization

ILC Reference Design Report Volume 4 - Detectors

This report, Volume IV of the International Linear Collider Reference Design Report, describes the detectors which will record and measure the charged and neutral particles produced in the ILC's high energy e+e- collisions. The physics of the ILC, and the environment of the machine-detector interface, pose new challenges for detector design. Several conceptual designs for the detector promise the needed performance, and ongoing detector R&D is addressing the outstanding technological issues. Two such detectors, operating in push-pull mode, perfectly instrument the ILC interaction region, and access the full potential of ILC physics.This report, Volume IV of the International Linear Collider Reference Design Report, describes the detectors which will record and measure the charged and neutral particles produced in the ILC's high energy e+e- collisions. The physics of the ILC, and the environment of the machine-detector interface, pose new challenges for detector design. Several conceptual designs for the detector promise the needed performance, and ongoing detector R&D is addressing the outstanding technological issues. Two such detectors, operating in push-pull mode, perfectly instrument the ILC interaction region, and access the full potential of ILC physics

ILC Reference Design Report Volume 3 - Accelerator

The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2 s^-1. The complex includes a polarized electron source, an undulator-based positron source, two 6.7 km circumference damping rings, two-stage bunch compressors, two 11 km long main linacs and a 4.5 km long beam delivery system. This report is Volume III (Accelerator) of the four volume Reference Design Report, which describes the design and cost of the ILC.The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2 s^-1. The complex includes a polarized electron source, an undulator-based positron source, two 6.7 km circumference damping rings, two-stage bunch compressors, two 11 km long main linacs and a 4.5 km long beam delivery system. This report is Volume III (Accelerator) of the four volume Reference Design Report, which describes the design and cost of the ILC