7,299 research outputs found
Effect of frictional boundary conditions and percentage area reduction on the extrusion pressure of Aluminum AA6063 alloy using FE analysis modelling
© 2020 by the authors; licensee Growing Science, Canada. This is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC-BY) license (http://creativecommons.org/licenses/by/4.0/).Finite Element Analysis was carried out to describe the effect of frictional boundary conditions and percentage reduction on deformation modelling (forward extrusion) of Aluminum AA6063 alloy. Curved die profiles of regular polygons (square, hexagonal, heptagonal, and octagonal) were designed using MATLAB R2009b and Autodesk Inventor 2013 to generate the coordinate and thesolid CAD model of the die profile respectively form a circular billet. The numerical analysis was performed using DeformTM-3D commercial package with frictional boundary conditions of 0.38 and 0.75 representing the wet and dry condition and varying the percentage reduction of 50%, 70%, and 90%. The results of the temperature distribution, effective stress, effective strain, andstrain rate were reported. As the percentage area reduction increases, the extrusion pressure also increases with an increasing frictional condition, and die length. Also, extrusion pressure decreases when the side of the polygon increases from square-shaped section follow by hexagonal shaped-section and least in octagonal shaped-section for both friction factors and percentage areareductions. For a given percentage reduction and cross-sectional area, there is no distinct difference between the predictive loads for the shaped-polygons. When the result of this analysis is compared with the experimental results from the literature, it is evident that DeformTM-3D is an effective tool for finite element analysis of non-isothermal deformation processes.Peer reviewedFinal Published versio
Experimental and numerical prediction of extrusion load at different lubricating conditions of aluminium 6063 alloy in backward cup extrusion
In the present research work using a backward cup extrusion (BCE) die profile, different lubricating conditions on aluminum alloy AA6063 have been experimentally and numerically investigated to predict the extrusion load. It was obvious that due to an increase in applications of the extrusion process, many researchers have worked on the extrusion process using different methods to achieve their aims. This experiment was conducted with three different lubricants namely: Castor oil, Palm Oil and tropical coconut oil; as well as without lubricants. Different lubricating conditions were employed of varying strain rates ranges from 1.5×10-3s-1, 2.0×10-3s-1, 2.5×10-3s-1, and 3.0×10-3s-1; Numerical analysis and simulation for dry and lubricated conditions during extrusion load were also performed using DEFORM 3D software. The results show that prediction extrusion load increases with increasing strain rates. The maximum extrusion load was found to be higher for extrusion without lubricants. In all cases of strain rate, palm oil showed a lower extrusion load compared to the other lubricants. Castor oil indicated the highest extrusion load when the experiment was carried out using lubrication. There was a consistent agreement between the result gotten from the experiment and simulation results of the extrusion load-strike curve.Peer reviewedFinal Published versio
Status of Spin Physics - Experimental Summary
The current status of spin physics experiments, based on talks presented at
the Third Circum-Pan-Pacific Symposium on High Energy Spin Physics held in
Beijing, 2001, is summarized in this article. Highlights of recent experimental
results at SLAC, JLab, and DESY, as well as future plans at these facilities
and at RHIC-spin are discussed.Comment: 18 pages, 7 figures, Invited talk presented at the Third
Circum-Pan-Pacific Symposium on High Energy Spin Physics held in Beijing,
October, 200
Multi-criteria Anomaly Detection using Pareto Depth Analysis
We consider the problem of identifying patterns in a data set that exhibit
anomalous behavior, often referred to as anomaly detection. In most anomaly
detection algorithms, the dissimilarity between data samples is calculated by a
single criterion, such as Euclidean distance. However, in many cases there may
not exist a single dissimilarity measure that captures all possible anomalous
patterns. In such a case, multiple criteria can be defined, and one can test
for anomalies by scalarizing the multiple criteria using a linear combination
of them. If the importance of the different criteria are not known in advance,
the algorithm may need to be executed multiple times with different choices of
weights in the linear combination. In this paper, we introduce a novel
non-parametric multi-criteria anomaly detection method using Pareto depth
analysis (PDA). PDA uses the concept of Pareto optimality to detect anomalies
under multiple criteria without having to run an algorithm multiple times with
different choices of weights. The proposed PDA approach scales linearly in the
number of criteria and is provably better than linear combinations of the
criteria.Comment: Removed an unnecessary line from Algorithm
Scheduling periodic jobs using imprecise results
One approach to avoid timing faults in hard, real-time systems is to make available intermediate, imprecise results produced by real-time processes. When a result of the desired quality cannot be produced in time, an imprecise result of acceptable quality produced before the deadline can be used. The problem of scheduling periodic jobs to meet deadlines on a system that provides the necessary programming language primitives and run-time support for processes to return imprecise results is discussed. Since the scheduler may choose to terminate a task before it is completed, causing it to produce an acceptable but imprecise result, the amount of processor time assigned to any task in a valid schedule can be less than the amount of time required to complete the task. A meaningful formulation of the scheduling problem must take into account the overall quality of the results. Depending on the different types of undesirable effects caused by errors, jobs are classified as type N or type C. For type N jobs, the effects of errors in results produced in different periods are not cumulative. A reasonable performance measure is the average error over all jobs. Three heuristic algorithms that lead to feasible schedules with small average errors are described. For type C jobs, the undesirable effects of errors produced in different periods are cumulative. Schedulability criteria of type C jobs are discussed
- …