104 research outputs found

    Fundamentals of Plasma-Material Interactions in Magnetic Fusion Devices

    Get PDF
    The interaction of plasmas and materials has a long history in the modification of condensed matter. Plasma-material interaction (PMI) can govern how low-temperature and high-temperature plasmas interact and modify materials surfaces. In magnetic fusion devices, PMI can also influence the operation of the fusion device. For example, incident energetic charged particle on fusion wall material surfaces can release target atoms via sputtering and can implant fuel particles in the lattice. Implanted energetic particles can mix fuel and influence recycling of fuel back to the plasma. Sputtered target atoms can become ionized in the magnetic sheath and re-deposit at the wall surface. The magnetic sheath will influence the energy and angular distribution of incident energetic particles and influence the implantation and release of fusion fuel

    Designing bioactive porous titanium interfaces to balance mechanical properties and in vitro cells behavior towards increased osseointegration

    Get PDF
    Titanium implant failures are mainly related to stress shielding phenomenon and the poor cell interaction with host bone tissue. The development of bioactive and biomimetic Ti scaffolds for bone regeneration remains a challenge which needs the design of Ti implants with enhanced osseointegration. In this context, 4 types of titanium samples were fabricated using conventional powder metallurgy, fully dense, dense etched, porous Ti, and porous etched Ti. Porous samples were manufactured by space holder technique, using ammonium bicarbonate particles as spacer in three different ranges of particle size (100–200 μm, 250–355 μm and 355–500 μm). Substrates were chemically etched by immersion in fluorhydric acid at different times (125 and 625 s) and subsequently, were characterized from a micro-structural, topographical and mechanical point of view. Etched surfaces showed an additional roughness preferentially located inside pores. In vitro tests showed that all substrates were biocompatible (80% of cell viability), confirming cell adhesion of premioblastic cells. Similarly, osteoblast showed similar cell proliferation rates at 4 days, however, higher cell metabolic activity was observed in fully dense and dense etched surfaces at 7 days. In contrast, a significant increase of alkaline phosphatase enzyme expression was observed in porous and porous etched samples compared to control surfaces (dense and dense etched), noticing the suitable surface modification parameters (porosity and roughness) to improve cell differentiation. Furthermore, the presence of pores and rough surfaces of porous Ti substrates remarkably decreased macrophage activation reducing the M1 phenotype polarization as well M1 cell marker expression. Thus, a successful surface modification of porous Ti scaffolds has been performed towards a reduction on stress shielding phenomenon and enhancement of bone osseointegration, achieving a biomechanical and biofunctional equilibrium.Ministry of Economy and Competitiveness of Spain grant MAT2015-71284-PJunta de Andalucía – FEDER (Spain) Project Ref. P12-TEP-140

    Directed Irradiation Synthesis as an Advanced Plasma Technology for Surface Modification to Activate Porous and “as-received” Titanium Surfaces

    Get PDF
    For the design of smart titanium implants, it is essential to balance the surface properties without any detrimental effect on the bulk properties of the material. Therefore, in this study, an irradiation-driven surface modification called directed irradiation synthesis (DIS) has been developed to nanopattern porousand“as-received”c.p. Tisur faces with the aim of improving cellular viability. Nano features were developed using singly-charged argon ions at 0.5 and 1.0 keV energies, incident angles from 0◦ to 75◦ degrees, and fluences up to 5.0×1017 cm−2. Irradiated surfaces were evaluated by scanning electron microscopy, atomic force microscopy and contact angle, observing an increased hydrophilicity (a contact angle reduction of 73.4% and 49.3%) and a higher roughness on both surfaces except for higher incident angles, which showed the smoothest surface. In-vitro studies demonstrated the biocompatibility of directed irradiation synthesis (DIS) reaching 84% and 87% cell viability levels at 1 and 7 days respectively, and a lower percentage of damaged DNA in tail compared to the control c.p. Ti. All these results confirm the potential of the DIS technique to modify complex surfaces at the nanoscale level promoting their biological performance.Department of Defense (Spain) contract W81XWH-11-2-0067Ministry of Economy and Competitiveness of Spain grant MAT2015-71284-

    Real time x-ray studies during nanostructure formation on silicon via low energy ion beam irradiation using ultrathin iron films

    Get PDF
    Real time grazing incidence small angle x-ray scattering and x-ray fluorescence (XRF) are used to elucidate nanodot formation on silicon surfaces during low energy ion beam irradiation of ultrathin iron-coated silicon substrates. Four surface modification stages were identified: (1) surface roughening due to film erosion, (2) surface smoothing and silicon-iron mixing, (3) structure formation, and (4) structure smoothing. The results conclude that 2.5 x 10(15) iron atoms in a 50 nm depth triggers surface nanopatterning with a correlated nanodots distance of 25 nm. Moreover, there is a wide window in time where the surface can have correlated nanostructures even after the removal of all the iron atoms from the sample as confirmed by XRF and ex-situ x-ray photoelectron spectroscopy (XPS). In addition, in-situ XPS results indicated silicide formation, which plays a role in the structure formation mechanism. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4773202

    Numerical simulations of wave breaking

    Get PDF
    This paper is devoted to the numerical simulation of wave breaking. It presents the results of a numerical workshop that was held during the conference LOMA04. The objective is to compare several mathematical models (compressible or incompressible) and associated numerical methods to compute the flow field during a wave breaking over a reef. The methods will also be compared with experiments

    In Vitro Bone Cell Behavior on Porous Titanium Samples: Influence of Porosity by Loose Sintering and Space Holder Techniques

    Get PDF
    A great variety of powder metallurgy techniques can produce biomimetic porous titanium structures with similar mechanical properties to host bone tissue. In this work, loose sintering and space holder techniques, two frequently used metallurgical techniques, are compared to evaluate the influences of porosity (content, size, morphology and wall roughness), mechanical properties (stiffness and yield strength) and in-vitro cellular responses (adhesion and proliferation of myoblasts and osteoblasts). These comparisons are made to achieve the best balance between biomechanical and bifunctional behavior of a partial porous implant for cortical bone replacement. Cell adhesion (filopodia presence) and spreading were promoted on both porous surfaces and fully dense substrates (non-porous control surfaces). Porous scaffold samples designed using 50 vol.% NaCl space holder technique had an improved bioactive response over those obtained with the loose sintering technique due to higher roughness and scaffold pore diameter. However, the presence of large and heterogeneous pores compromises the mechanical reliability of the implant. Considering both scenarios, the substrates obtained with 40 vol.% NH4HCO3 and pore size ranges between 100 and 200 μm provide a balanced optimization of size and strength to promote in-vitro osseointegration.FEDER US-1259771University Complutense of Madrid (UCM) C2C12-GFPJunta de Andalucía US-125977

    Locating the Youngest HII Regions in M82 with 7 mm Continuum Maps

    Full text link
    We present 7mm Very Large Array continuum images of the starburst galaxy M82. On arcsecond scales, two-thirds of the 7mm continuum consists of free-free emission from HII regions. In the subarcsecond resolution map, we identify 14 compact sources, including 9 bright HII regions with N_Lyc > 10^51 sec^-1. Four of the HII regions have rising spectra, implying emission measures > 10^8 cm^-6 pc. Except for one compact source with peculiar features, all other compact radio sources are found in dust lanes and do not have optical or near-infrared continuum counterparts. Four regions of extended, high brightness (EM > 10^7 cm-6 pc) radio emission are found in our high resolution map, including some as large as ~2", or 30 pc, representing either associations of small HII regions, or sheetlike structures of denser gas. The good correlation between 7 mm emission and Spitzer IRAC 8 micron continuum-removed PAH feature suggests that PAH emission may track the recently formed OB stars. We find an excellent correlation between molecular gas and star formation, particularly dense gas traced by HCN, down to the ~ 45 pc scale in M82. We also find star formation efficiencies (SFEs) of 1-10% on the same scale, based on CO maps. The highest SFE are found in regions with the highest dense gas fractions.Comment: 18 pages, 10 figures. Accepted for publication in A

    Formation of silicon nanodots via ion beam sputtering of ultrathin gold thin film coatings on Si

    Get PDF
    Ion beam sputtering of ultrathin film Au coatings used as a physical catalyst for self-organization of Si nanostructures has been achieved by tuning the incident particle energy. This approach holds promise as a scalable nanomanufacturing parallel processing alternative to candidate nanolithography techniques. Structures of 11- to 14-nm Si nanodots are formed with normal incidence low-energy Ar ions of 200 eV and fluences above 2 × 1017 cm-2. In situ surface characterization during ion irradiation elucidates early stage ion mixing migration mechanism for nanodot self-organization. In particular, the evolution from gold film islands to the formation of ion-induced metastable gold silicide followed by pure Si nanodots formed with no need for impurity seeding

    Numerical simulation of wave breaking

    Get PDF
    This paper is devoted to the numerical simulation of wave breaking. It presents the results of a numerical workshop that was held during the conference LOMA04. The objective is to compare several mathematical models (compressible or incompressible) and associated numerical methods to compute the flow field during a wave breaking over a reef. The methods will also be compared with experiments
    corecore