Preliminary optical design for the common fore optics of METIS

METIS is the Mid-infrared E-ELT Imager and Spectrograph, which will provide outstanding observing capabilities, focusing on high angular and spectral resolution. It consists of two diffraction-limited imagers operating in the LM and NQ bands respectively and an IFU fed diffraction-limited high-resolution (R=100,000) LM band spectrograph. These science subsystems are preceded by the common fore optics (CFO), which provides the following essential functionalities: calibration, chopping, image de-rotation, thermal background and stray light reduction. We show the evolution of the CFO optical design from the conceptual design to the preliminary optical design, detail the optimization steps and discuss the necessary trade-offs

Assembly, integration, and verification (AIV) in ALMA: reries processing of array elements

The Atacama Large Millimeter/submillimeter Array (ALMA) is a joint project between astronomical organizations in Europe, North America, and East Asia, in collaboration with the Republic of Chile. ALMA will consist of at least 54 twelve-meter antennas and 12 seven-meter antennas operating as an aperture synthesis array in the (sub)millimeter wavelength range. It is the responsibility of ALMA AIV to deliver the fully assembled, integrated, and verified antennas (array elements) to the telescope array. After an initial phase of infrastructure setup AIV activities began when the first ALMA antenna and subsystems became available in mid 2008. During the second semester of 2009 a project-wide effort was made to put in operation a first 3-antenna interferometer at the Array Operations Site (AOS). In 2010 the AIV focus was the transition from event-driven activities towards routine series production. Also, due to the ramp-up of operations activities, AIV underwent an organizational change from an autonomous department into a project within a strong matrix management structure. When the subsystem deliveries stabilized in early 2011, steady-state series processing could be achieved in an efficient and reliable manner. The challenge today is to maintain this production pace until completion towards the end of 2013. This paper describes the way ALMA AIV evolved successfully from the initial phase to the present steady-state of array element series processing. It elaborates on the different project phases and their relationships, presents processing statistics, illustrates the lessons learned and relevant best practices, and concludes with an outlook of the path towards completion.Peer reviewed: YesNRC publication: Ye

The Mid-Infrared Instrument for the James Webb Space Telescope, VI: The Medium Resolution Spectrometer

We describe the design and performance of the Medium Resolution Spectrometer (MRS) for the JWST-MIRI instrument. The MRS incorporates four coaxial spectral channels in a compact opto-mechanical layout that generates spectral images over fields of view up to 7.7 × 7.7" in extent and at spectral resolving powers ranging from 1300 to 3700. Each channel includes an all-reflective integral field unit (IFU): an "image slicer" that reformats the input field for presentation to a grating spectrometer. Two 1024 × 1024 focal plane detector arrays record the output spectral images with an instantaneous spectral coverage of approximately one third of the full wavelength range of each channel. The full 5-28.5 mum spectrum is then obtained by making three exposures using gratings and pass-band-determining filters that are selected using just two three-position mechanisms. The expected on-orbit optical performance is presented, based on testing of the MIRI Flight Model and including spectral and spatial coverage and resolution. The point spread function of the reconstructed images is shown to be diffraction limited and the optical transmission is shown to be consistent with the design expectations.published in PASP, vol. 127, issue 953, pp.623-632, 2015status: publishe