Electrospinning of ultra-thin polymer fibers

The electrospinning technique was used to spin ultra-thin fibers from several polymer/solvent systems. The diameter of the electrospun fibers ranged from 16 nm to 2 μm. The morphology of these fibers was investigated with an atomic force microscope (AFM) and an optical microscope. Polyethylene oxide) (PEO) dissolved in water or chloroform was studied in greater detail. PEO fibers spun from aqueous solution show a “beads on a string” morphology. An AFM study showed that the surface of these fibers is highly ordered. The “beads on a string” morphology can be avoided if PEO is spun from solution in chloroform; the resulting fibers show a lamellar morphology. Polyvinylalcohol (PVA) dissolved in water and cellulose acetate dissolved in acetone were additional polymer/solvent systems which were investigated. Furthermore, the electrospinning process was studied: different experimental lay-outs were tested, electrostatic fields were simulated, and voltage - current characteristics of the electrospinning process were recorded

Early stage morphology of quench condensed Ag, Pb and Pb/Ag hybrid films

Scanning Tunneling Microscopy (STM) has been used to study the morphology of Ag, Pb and Pb/Ag bilayer films fabricated by quench condensation of the elements onto cold (T=77K), inert and atomically flat Highly Oriented Pyrolytic Graphite (HOPG) substrates. All films are thinner than 10 nm and show a granular structure that is consistent with earlier studies of QC films. The average lateral diameter, $\bar {2r}$, of the Ag grains, however, depends on whether the Ag is deposited directly on HOPG ($\bar {2r}$ = 13 nm) or on a Pb film consisting of a single layer of Pb grains ($\bar {2r}$ = 26.8 nm). In addition, the critical thickness for electrical conduction ($d_{G}$) of Pb/Ag films on inert glass substrates is substantially larger than for pure Ag films. These results are evidence that the structure of the underlying substrate exerts an influence on the size of the grains in QC films. We propose a qualitative explanation for this previously unencountered phenomenon.Comment: 11 pages, 3 figures and one tabl

Granular discharge and clogging for tilted hoppers

We measure the flux of spherical glass beads through a hole as a systematic function of both tilt angle and hole diameter, for two different size beads. The discharge increases with hole diameter in accord with the Beverloo relation for both horizontal and vertical holes, but in the latter case with a larger small-hole cutoff. For large holes the flux decreases linearly in cosine of the tilt angle, vanishing smoothly somewhat below the angle of repose. For small holes it vanishes abruptly at a smaller angle. The conditions for zero flux are discussed in the context of a {\it clogging phase diagram} of flow state vs tilt angle and ratio of hole to grain size

Transitions in the Horizontal Transport of Vertically Vibrated Granular Layers

Motivated by recent advances in the investigation of fluctuation-driven ratchets and flows in excited granular media, we have carried out experimental and simulational studies to explore the horizontal transport of granular particles in a vertically vibrated system whose base has a sawtooth-shaped profile. The resulting material flow exhibits novel collective behavior, both as a function of the number of layers of particles and the driving frequency; in particular, under certain conditions, increasing the layer thickness leads to a reversal of the current, while the onset of transport as a function of frequency occurs gradually in a manner reminiscent of a phase transition. Our experimental findings are interpreted here with the help of extensive, event driven Molecular Dynamics simulations. In addition to reproducing the experimental results, the simulations revealed that the current may be reversed as a function of the driving frequency as well. We also give details about the simulations so that similar numerical studies can be carried out in a more straightforward manner in the future.Comment: 12 pages, 18 figure