10,908 research outputs found
Wind tunnel model and method
The design and development of a wind tunnel model equipped with pressure measuring devices are discussed. The pressure measuring orifices are integrally constructed in the wind tunnel model and do not contribute to distortions of the aerodynamic surface. The construction of a typical model is described and a drawing of the device is included
Metric half-span model support system
A model support system used to support a model in a wind tunnel test section is described. The model comprises a metric, or measured, half-span supported by a nonmetric, or nonmeasured half-span which is connected to a sting support. Moments and forces acting on the metric half-span are measured without interference from the support system during a wind tunnel test
Computer program to determine pressure distributions and forces on blunt bodies of revolution
Program was written to include integration of surface pressure in order to obtain axial-force, normal-force, and pitching-moment coefficients. Program was written in CDC FORTRAN for the CDC-6600 computer system
Description and calibration of the Langley unitary plan wind tunnel
The two test sections of the Langley Unitary Plan Wind Tunnel were calibrated over the operating Mach number range from 1.47 to 4.63. The results of the calibration are presented along with a a description of the facility and its operational capability. The calibrations include Mach number and flow angularity distributions in both test sections at selected Mach numbers and tunnel stagnation pressures. Calibration data are also presented on turbulence, test-section boundary layer characteristics, moisture effects, blockage, and stagnation-temperature distributions. The facility is described in detail including dimensions and capacities where appropriate, and example of special test capabilities are presented. The operating parameters are fully defined and the power consumption characteristics are discussed
Mislift and miss-drag programs
Method, developed and coded for digital computation, predicts aerodynamic loading on configurations for which linear theory assumptions are violated. Program is written in FORTRAN 4 for use on CDC-6000 series computers
Technique for the integral casting of pressure instrumentation in wind-tunnel models
Wind tunnel models are cast around core consisting of array of tubing. Principal advantage of technique is that greater number of pressure orifices are easily installed, without compromising aerodynamic shape of model. Technique reduces construction cost by about 50 percent
Comparison of impact results for several polymeric composites over a wide range of low impact velocities
Static indentation, falling weight, and ballistic impact tests were conducted in clamped plates made of AS4/3501-6 and IM7/8551-7 prepreg tape. The transversely isotropic plates were nominally 7-mm thick. Pendulum and ballistic tests were also conducted on simply supported plates braided with Celion 12000 fibers and 3501-6 epoxy. The 20 degree braided plates were about 5-mm thick. The impactors had spherical or hemispherical shapes with a 12.7 mm diameter. Residual compression strength and damage size were measured. For a given kinetic energy, damage size was least for IM7/8551-7 and greatest for the braided material. Strengths varied inversely with damage size. For a given damage size, strength loss as a fraction of original strength was least for the braided material and greatest for AS4/3501-6 and IM7/8551-7. Strength loss for IM7/8551-7 and AS4/3501-6 was nearly equal. No significant differences were noticed between damage sizes and residual compression strengths for the static indentation, falling weight, and ballistic tests of AS4/3501-6 and IM7/8551-7. For the braided material, sizes of damage were significantly less and compression strengths were significantly more for the falling weight tests than for the ballistic tests
Investigation of the static lift capability of a low-aspect-ratio wing operating in a powered ground-effect mode
A preliminary experimental investigation has been made to evaluate the powered ground-effect capability of a low-aspect-ratio, wing-body configuration with forward-mounted propulsion. The tests were limited to static ground-effect conditions in order to obtain information on an air-cushion mode of operation. The results indicate, in general, that an air-cushion mode is within the capability of the type of configuration examined. The conditions examined indicated the possibility of hover mode and also forward acceleration capability in near-ground effect. Center-of-pressure movement did not appear to be a problem. However, it was recognized that longitudinal trim would be a problem to consider in both the hover and acceleration modes
HD 145263: Spectral Observations of Silica Debris Disk Formation via Extreme Space Weathering?
We report here time domain infrared spectroscopy and optical photometry of
the HD145263 silica-rich circumstellar disk system taken from 2003 through
2014. We find an F4V host star surrounded by a stable, massive 1e22 - 1e23 kg
(M_Moon to M_Mars) dust disk. No disk gas was detected, and the primary star
was seen rotating with a rapid ~1.75 day period. After resolving a problem with
previously reported observations, we find the silica, Mg-olivine, and
Fe-pyroxene mineralogy of the dust disk to be stable throughout, and very
unusual compared to the ferromagnesian silicates typically found in primordial
and debris disks. By comparison with mid-infrared spectral features of
primitive solar system dust, we explore the possibility that HD 145263's
circumstellar dust mineralogy occurred with preferential destruction of
Fe-bearing olivines, metal sulfides, and water ice in an initially comet-like
mineral mix and their replacement by Fe-bearing pyroxenes, amorphous pyroxene,
and silica. We reject models based on vaporizing optical stellar megaflares,
aqueous alteration, or giant hypervelocity impacts as unable to produce the
observed mineralogy. Scenarios involving unusually high Si abundances are at
odds with the normal stellar absorption near-infrared feature strengths for Mg,
Fe, and Si. Models involving intense space weathering of a thin surface patina
via moderate (T < 1300 K) heating and energetic ion sputtering due to a stellar
superflare from the F4V primary are consistent with the observations. The space
weathered patina should be reddened, contain copious amounts of nanophase Fe,
and should be transient on timescales of decades unless replenished.Comment: 41 Pages, 5 Figures, 5 Tables, Accepted for publication in the
Astrophysical Journa
- …