886 research outputs found
Variation in levels and removal efficiency of heavy and trace metals from wastewater treatment plant effluents in Cape Town and Stellenbosch, South Africa
This study focused on one year monitoring campaign to monitor the occurrence and removal of Endocrine Disruptive Metals (EDMs) and trace metals from selected wastewater treatment plants (WWTPs) in Stellenbosch and Cape Town. Composite water samples were collected from the WWTPs from January 2010 to December 2010 on a quarterly basis and concentrations determined using inductively coupled plasma-mass spectrometry (ICP-MS) after open beaker digestion. A total of 432 water samples consisting of raw, primary effluent, secondary effluent and final effluents were collected and analyzed. The general abundance distribution pattern for metals was Zn > Cu > Pb > Cr > Ni > As > Co > Cd > Hg. The removal efficiency ranged from 1.5% for Hg at Zandvliet WWTP plant during winter to 98.27% for Cu at Athlone WWTP treatment plant during summer. The final effluent concentration for most of the metals were within South African water quality guidelines while As, Hg, Cd and Pb concentration were higher than maximum limits set by the Canadian Council of Ministers of the Environment. Potsdam WWTP showed to be the most effective at heavy metals removal as compared with the other five treatment plants investigated in this study. The effluent metal concentration over time could pose health risk if used for agricultural irrigation.Keywords: Seasonal variation, endocrine disrupting metals, wastewater treatment plants, effluents, coupled plasma-mass spectrometry (ICP-MS), Cape Tow
A comparative study of the buffeting properties of FRP and steel box girder cable-stayed bridges
2011-2012 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe
Does prohibitin expression regulate sperm mitochondrial membrane potential, sperm motility, and male fertility?
Prohibitin (PHB) is a highly conserved major sperm mitochondrial membrane protein whose absence in somatic cells is associated with mitochondrial membrane depolarization and increased generation of reactive oxygen species (ROS). Our recent findings suggest that high levels of oxidants in human semen may contribute to male infertility and that sperm motility could be the earliest and most sensitive indicator of oxidative damage. Based on PHB's roles in mitochondrial sub-compartmentalization and respiratory chain assembly, we examine sperm PHB expression and mitochondrial membrane potential (MITO) in infertile men with poor sperm motility (asthenospermia, A) and/or low sperm concentrations (oligoasthenospermia, OA). Here, we demonstrate that MITO is significantly lower in sperm from A and OA subjects than in normospermic (N) subjects; the decrease is more severe for OA than for A subjects. PHB expression is also significantly lower in sperm from A and OA subjects. Significantly positive correlations are found among PHB expression, MITO, and sperm motility in normospermic, asthenospermic, and oligoasthenospermic subjects. Collectively, our observations lead to the hypothesis that PHB expression is an indicator of sperm quality in infertile men, and that it regulates sperm motility via an alteration in MITO and increased ROS levels. © Copyright 2012, Mary Ann Liebert, Inc.published_or_final_versio
Super-resolving phase measurements with a multi-photon entangled state
Using a linear optical elements and post-selection, we construct an entangled
polarization state of three photons in the same spatial mode. This state is
analogous to a ``photon-number path entangled state'' and can be used for
super-resolving interferometry. Measuring a birefringent phase shift, we
demonstrate two- and three-fold improvements in phase resolution.Comment: 4 pages, 3 figure
Noiseless Linear Amplification and Distillation of Entanglement
The idea of signal amplification is ubiquitous in the control of physical
systems, and the ultimate performance limit of amplifiers is set by quantum
physics. Increasing the amplitude of an unknown quantum optical field, or more
generally any harmonic oscillator state, must introduce noise. This linear
amplification noise prevents the perfect copying of the quantum state, enforces
quantum limits on communications and metrology, and is the physical mechanism
that prevents the increase of entanglement via local operations. It is known
that non-deterministic versions of ideal cloning and local entanglement
increase (distillation) are allowed, suggesting the possibility of
non-deterministic noiseless linear amplification. Here we introduce, and
experimentally demonstrate, such a noiseless linear amplifier for
continuous-variables states of the optical field, and use it to demonstrate
entanglement distillation of field-mode entanglement. This simple but powerful
circuit can form the basis of practical devices for enhancing quantum
technologies. The idea of noiseless amplification unifies approaches to cloning
and distillation, and will find applications in quantum metrology and
communications.Comment: Submitted 10 June 200
General framework for estimating the ultimate precision limit in noisy quantum-enhanced metrology
The estimation of parameters characterizing dynamical processes is central to
science and technology. The estimation error changes with the number N of
resources employed in the experiment (which could quantify, for instance, the
number of probes or the probing energy). Typically, it scales as 1/N^(1/2).
Quantum strategies may improve the precision, for noiseless processes, by an
extra factor 1/N^(1/2). For noisy processes, it is not known in general if and
when this improvement can be achieved. Here we propose a general framework for
obtaining attainable and useful lower bounds for the ultimate limit of
precision in noisy systems. We apply this bound to lossy optical interferometry
and atomic spectroscopy in the presence of dephasing, showing that it captures
the main features of the transition from the 1/N to the 1/N^(1/2) behaviour as
N increases, independently of the initial state of the probes, and even with
use of adaptive feedback.Comment: Published in Nature Physics. This is the revised submitted version.
The supplementary material can be found at
http://www.nature.com/nphys/journal/v7/n5/extref/nphys1958-s1.pd
Modelling avalanches in martensites
Solids subject to continuous changes of temperature or mechanical load often
exhibit discontinuous avalanche-like responses. For instance, avalanche
dynamics have been observed during plastic deformation, fracture, domain
switching in ferroic materials or martensitic transformations. The statistical
analysis of avalanches reveals a very complex scenario with a distinctive lack
of characteristic scales. Much effort has been devoted in the last decades to
understand the origin and ubiquity of scale-free behaviour in solids and many
other systems. This chapter reviews some efforts to understand the
characteristics of avalanches in martensites through mathematical modelling.Comment: Chapter in the book "Avalanches in Functional Materials and
Geophysics", edited by E. K. H. Salje, A. Saxena, and A. Planes. The final
publication is available at Springer via
http://dx.doi.org/10.1007/978-3-319-45612-6_
Review: optical fiber sensors for civil engineering applications
Optical fiber sensor (OFS) technologies have developed rapidly over the last few decades, and various types of OFS have found practical applications in the field of civil engineering. In this paper, which is resulting from the work of the RILEM technical committee “Optical fiber sensors for civil engineering applications”, different kinds of sensing techniques, including change of light intensity, interferometry, fiber Bragg grating, adsorption measurement and distributed sensing, are briefly reviewed to introduce the basic sensing principles. Then, the applications of OFS in highway structures, building structures, geotechnical structures, pipelines as well as cables monitoring are described, with focus on sensor design, installation technique and sensor performance. It is believed that the State-of-the-Art review is helpful to engineers considering the use of OFS in their projects, and can facilitate the wider application of OFS technologies in construction industry
A review of information flow diagrammatic models for product-service systems
A product-service system (PSS) is a combination of products and services to
create value for both customers and manufacturers. Modelling a PSS based on
function orientation offers a useful way to distinguish system inputs and
outputs with regards to how data are consumed and information is used, i.e.
information flow. This article presents a review of diagrammatic information
flow tools, which are designed to describe a system through its functions. The
origin, concept and applications of these tools are investigated, followed by an
analysis of information flow modelling with regards to key PSS properties. A
case study of selection laser melting technology implemented as PSS will then be
used to show the application of information flow modelling for PSS design. A
discussion based on the usefulness of the tools in modelling the key elements of
PSS and possible future research directions are also presented
Molecular identification of adenoviruses associated with respiratory infection in Egypt from 2003 to 2010.
BACKGROUND: Human adenoviruses of species B, C, and E (HAdV-B, -C, -E) are frequent causative agents of acute respiratory infections worldwide. As part of a surveillance program aimed at identifying the etiology of influenza-like illness (ILI) in Egypt, we characterized 105 adenovirus isolates from clinical samples collected between 2003 and 2010. METHODS: Identification of the isolates as HAdV was accomplished by an immunofluorescence assay (IFA) and confirmed by a set of species and type specific polymerase chain reactions (PCR). RESULTS: Of the 105 isolates, 42% were identified as belonging to HAdV-B, 60% as HAdV-C, and 1% as HAdV-E. We identified a total of six co-infections by PCR, of which five were HAdV-B/HAdV-C co-infections, and one was a co-infection of two HAdV-C types: HAdV-5/HAdV-6. Molecular typing by PCR enabled the identification of eight genotypes of human adenoviruses; HAdV-3 (n = 22), HAdV-7 (n = 14), HAdV-11 (n = 8), HAdV-1 (n = 22), HAdV-2 (20), HAdV-5 (n = 15), HAdV-6 (n = 3) and HAdV-4 (n = 1). The most abundant species in the characterized collection of isolates was HAdV-C, which is concordant with existing data for worldwide epidemiology of HAdV respiratory infections. CONCLUSIONS: We identified three species, HAdV-B, -C and -E, among patients with ILI over the course of 7 years in Egypt, with at least eight diverse types circulating
- …