777 research outputs found
Recombinant family 3 carbohydrate-binding module as a new additive for enhanced enzymatic saccharification of whole slurry from autohydrolyzed eucalyptus globulus wood
By-products resulting from lignocellulosics pretreatment affect the digestibility of resulting whole slurries, but this can be minimized by additives supplementation. In this work, a family 3 carbohydrate-binding module (CBM3), recombinantly produced from Escherichia coli, was used as additive in the enzymatic hydrolysis of the whole slurry from autohydrolyzed Eucalyptus globulus wood (EGW). At the higher dosage used (30 mg/gsolids), CBM3 led to an increase in glucose yield from 75 to 89%. A similar result was obtained for bovine serum albumin (BSA) (11% increase), which has a well-documented additive effect. CBM3 had no effect on the non-productive binding of enzymes, since it could not bind to EGW lignin, while it rapidly bound to cellulose, as shown by fluorescence microscopy. CBM3 is a valid additive for enhanced lignocellulosic saccharification and a valuable alternative to costly additives (e.g. polyethylene glycol) as it can be affordably produced from heterologous bacterium, thus contributing to more cost-efficient biomass valorization bioprocesses.This work was developed under the strategic funding of UID/BIO/04469/2013 unit, COMPETE 2020 (POCI-01-0145-FEDER-006684) and BioTecNorte operation (NORTE-01-0145-FEDER-000004) funded by the European Regional Development Fund under the scope of Norte2020—Programa Operacional Regional do Norte. The research leading to the reported results has received funding from Fundação para a Ciência e a Tecnologia (FCT) through the project MultiBiorefinery (POCI-01–0145-FEDER-016403) and through grants to C. Oliveira (SFRH/BPD/110640/2015) and D. Gomes (SFRH/BD/88623/2012).info:eu-repo/semantics/publishedVersio
A comparative study of four intensive care outcome prediction models in cardiac surgery patients
<p>Abstract</p> <p>Background</p> <p>Outcome prediction scoring systems are increasingly used in intensive care medicine, but most were not developed for use in cardiac surgery patients. We compared the performance of four intensive care outcome prediction scoring systems (Acute Physiology and Chronic Health Evaluation II [APACHE II], Simplified Acute Physiology Score II [SAPS II], Sequential Organ Failure Assessment [SOFA], and Cardiac Surgery Score [CASUS]) in patients after open heart surgery.</p> <p>Methods</p> <p>We prospectively included all consecutive adult patients who underwent open heart surgery and were admitted to the intensive care unit (ICU) between January 1<sup>st </sup>2007 and December 31<sup>st </sup>2008. Scores were calculated daily from ICU admission until discharge. The outcome measure was ICU mortality. The performance of the four scores was assessed by calibration and discrimination statistics. Derived variables (Mean- and Max- scores) were also evaluated.</p> <p>Results</p> <p>During the study period, 2801 patients (29.6% female) were included. Mean age was 66.9 ± 10.7 years and the ICU mortality rate was 5.2%. Calibration tests for SOFA and CASUS were reliable throughout (p-value not < 0.05), but there were significant differences between predicted and observed outcome for SAPS II (days 1, 2, 3 and 5) and APACHE II (days 2 and 3). CASUS, and its mean- and maximum-derivatives, discriminated better between survivors and non-survivors than the other scores throughout the study (area under curve ≥ 0.90). In order of best discrimination, CASUS was followed by SOFA, then SAPS II, and finally APACHE II. SAPS II and APACHE II derivatives had discrimination results that were superior to those of the SOFA derivatives.</p> <p>Conclusions</p> <p>CASUS and SOFA are reliable ICU mortality risk stratification models for cardiac surgery patients. SAPS II and APACHE II did not perform well in terms of calibration and discrimination statistics.</p
The association between preschool behavioural problems and internalizing difficulties at age 10–12 years
Comparison of phase structures and surface free energy values for the coatings synthesised from linear polyurethanes and from waterborne polyurethane cationomers
WAXS, DSC and AFM methods were employed to compare phase structures of the coatings obtained from waterborne polyurethane cationomers which had been synthesised in the reaction of some diisocyanates (MDI, IPDI, TDI and HDI) with polyoxyethylene glycols (M = 600 and 2,000) and butane1,4-diol or N-methyl- or N-butyldiethanolamine and 2,2,3,3-tetrafluoro-1,4-butanediol. The structures were also analysed of the coatings derived from linear polyurethanes which had been synthesised on the basis of similar raw materials. Better rigidity was found for generally amorphous cationomer coats. Changes were discussed in the surface free energy (SFE) values and in their components, as calculated independently with the use of the van Oss–Good and Owens–Wendt methods. Polyurethane coats turned out more hydrophobic as compared to cationomer ones. In both coat types, fluorine incorporated into cationomers contributed to lower SFE values: from 50 down to about 30 mJ/m2
CORRIE: enzyme sequence annotation with confidence estimates
Using a previously developed automated method for enzyme annotation, we report the re-annotation of the ENZYME database and the analysis of local error rates per class. In control experiments, we demonstrate that the method is able to correctly re-annotate 91% of all Enzyme Classification (EC) classes with high coverage (755 out of 827). Only 44 enzyme classes are found to contain false positives, while the remaining 28 enzyme classes are not represented. We also show cases where the re-annotation procedure results in partial overlaps for those few enzyme classes where a certain inconsistency might appear between homologous proteins, mostly due to function specificity. Our results allow the interactive exploration of the EC hierarchy for known enzyme families as well as putative enzyme sequences that may need to be classified within the EC hierarchy. These aspects of our framework have been incorporated into a web-server, called CORRIE, which stands for Correspondence Indicator Estimation and allows the interactive prediction of a functional class for putative enzymes from sequence alone, supported by probabilistic measures in the context of the pre-calculated Correspondence Indicators of known enzymes with the functional classes of the EC hierarchy. The CORRIE server is available at:
A comparison of cryopreservation methods: Slow-cooling vs. rapid-cooling based on cell viability, oxidative stress, apoptosis, and CD34+ enumeration of human umbilical cord blood mononucleated cells
<p>Abstract</p> <p>Background</p> <p>The finding of human umbilical cord blood as one of the most likely sources of hematopoietic stem cells offers a less invasive alternative for the need of hematopoietic stem cell transplantation. Due to the once-in-a-life time chance of collecting it, an optimum cryopreservation method that can preserve the life and function of the cells contained is critically needed.</p> <p>Methods</p> <p>Until now, slow-cooling has been the routine method of cryopreservation; however, rapid-cooling offers a simple, efficient, and harmless method for preserving the life and function of the desired cells. Therefore, this study was conducted to compare the effectiveness of slow- and rapid-cooling to preserve umbilical cord blood of mononucleated cells suspected of containing hematopoietic stem cells. The parameters used in this study were differences in cell viability, malondialdehyde content, and apoptosis level. The identification of hematopoietic stem cells themselves was carried out by enumerating CD34<sup>+ </sup>in a flow cytometer.</p> <p>Results</p> <p>Our results showed that mononucleated cell viability after rapid-cooling (91.9%) was significantly higher than that after slow-cooling (75.5%), with a <it>p </it>value = 0.003. Interestingly, the malondialdehyde level in the mononucleated cell population after rapid-cooling (56.45 μM) was also significantly higher than that after slow-cooling (33.25 μM), with a <it>p </it>value < 0.001. The apoptosis level in rapid-cooling population (5.18%) was not significantly different from that of the mononucleated cell population that underwent slow-cooling (3.81%), with a <it>p </it>value = 0.138. However, CD34<sup>+ </sup>enumeration was much higher in the population that underwent slow-cooling (23.32 cell/μl) than in the one that underwent rapid-cooling (2.47 cell/μl), with a <it>p </it>value = 0.001.</p> <p>Conclusions</p> <p>Rapid-cooling is a potential cryopreservation method to be used to preserve the umbilical cord blood of mononucleated cells, although further optimization of the number of CD34<sup>+ </sup>cells after rapid-cooling is critically needed.</p
Isotope sensitive measurement of the hole-nuclear spin interaction in quantum dots
Decoherence caused by nuclear field fluctuations is a fundamental obstacle to
the realization of quantum information processing using single electron spins.
Alternative proposals have been made to use spin qubits based on valence band
holes having weaker hyperfine coupling. However, it was demonstrated recently
both theoretically and experimentally that the hole hyperfine interaction is
not negligible, although a consistent picture of the mechanism controlling the
magnitude of the hole-nuclear coupling is still lacking. Here we address this
problem by performing isotope selective measurement of the valence band
hyperfine coupling in InGaAs/GaAs, InP/GaInP and GaAs/AlGaAs quantum dots.
Contrary to existing models we find that the hole hyperfine constant along the
growth direction of the structure (normalized by the electron hyperfine
constant) has opposite signs for different isotopes and ranges from -15% to
+15%. We attribute such changes in hole hyperfine constants to the competing
positive contributions of p-symmetry atomic orbitals and the negative
contributions of d-orbitals. Furthermore, we find that the d-symmetry
contribution leads to a new mechanism for hole-nuclear spin flips which may
play an important role in hole spin decoherence. In addition the measured
hyperfine constants enable a fundamentally new approach for verification of the
computed Bloch wavefunctions in the vicinity of nuclei in semiconductor
nanostructures
Baby Business: a randomised controlled trial of a universal parenting program that aims to prevent early infant sleep and cry problems and associated parental depression
<p>Abstract</p> <p>Background</p> <p>Infant crying and sleep problems (e.g. frequent night waking, difficulties settling to sleep) each affect up to 30% of infants and often co-exist. They are costly to manage and associated with adverse outcomes including postnatal depression symptoms, early weaning from breast milk, and later child behaviour problems. Preventing such problems could improve these adverse outcomes and reduce costs to families and the health care system. Anticipatory guidance-i.e. providing parents with information about normal infant sleep and cry patterns, ways to encourage self-settling in infants, and ways to develop feeding and settling routines <it>before </it>the onset of problems-could prevent such problems. This paper outlines the protocol for our study which aims to test an anticipatory guidance approach.</p> <p>Methods/Design</p> <p>750 families from four Local Government Areas in Melbourne, Australia have been randomised to receive the <it>Baby Business </it>program (intervention group) or usual care (control group) offered by health services. The <it>Baby Business </it>program provides parents with information about infant sleep and crying via a DVD and booklet (mailed soon after birth), telephone consultation (at infant age 6-8 weeks) and parent group session (at infant age 12 weeks). All English speaking parents of healthy newborn infants born at > 32 weeks gestation and referred by their maternal and child health nurse at their first post partum home visit (day 7-10 postpartum), are eligible. The primary outcome is parent report of infant night time sleep as a problem at four months of age and secondary outcomes include parent report of infant daytime sleep or crying as a problem, mean duration of infant sleep and crying/24 hours, parental depression symptoms, parent sleep quality and quantity and health service use. Data will be collected at two weeks (baseline), four months and six months of age. An economic evaluation using a cost-consequences approach will, from a societal perspective, compare costs and health outcomes between the intervention and control groups.</p> <p>Discussion</p> <p>To our knowledge this is the first randomised controlled trial of a program which aims to prevent both infant sleeping and crying problems and associated postnatal depression symptoms. If effective, it could offer an important public health prevention approach to these common, distressing problems.</p> <p>Trial registration number</p> <p>ISRCTN: <a href="http://www.controlled-trials.com/ISRCTN63834603">ISRCTN63834603</a></p
- …