285 research outputs found
Modeling of Electrokinetic Remediation Combining Local Chemical Equilibrium and Chemical Reaction Kinetics
A mathematical model for reactive-transport processes in porous media is presented. The modeled system includes diffusion, electromigration and electroosmosis as the most relevant transport mechanism and water electrolysis at the electrodes, aqueous species complexation, precipitation and dissolution as the chemical reactions taken place during the treatment time. The model is based on the local chemical equilibrium for most of the reversible chemical reactions occurring in the process. As a novel enhancement of previous models, the local chemical equilibrium reactive-transport model is combined with the solution of the transient equations for the kinetics of those chemical reactions that have representative rates in the same order than the transport mechanisms.
The model is validated by comparison of simulation and experimental results for an acid- enhanced electrokinetic treatment of a real Pb-contaminated calcareous soil. The kinetics of the main pH buffering process, the calcite dissolution, was defined by a simplified empirical kinetic law. Results show that the evaluation of kinetic rate entails a significant improvement of the model prediction capability.This work has received funding from the European Unionâs Horizon 2020 research and innovation programme under the Marie SkĆodowska-Curie grant agreement No. 778045. Part of this work was supported financially by the European Commission within the project LIFE12 ENV/IT/442 SEKRET âSediment electrokinetic remediation technology for heavy metal pollution removalâ. Paz-Garcia acknowledges the financial support from the âProyecto Puente - Plan Propio de InvestigaciĂłn y Transferencia de la Universidad de MĂĄlagaâ, code: PPIT.UMA.B5.2018/17. Villen-Guzman acknowledges the financial support from the University of Malaga through a postdoctoral contract
Two-Dimensional Modeling of the Electrokinetic Desalination Treatment of a Brick Wall:Abstract of oral presentation
Influence of the Chemical Interactions on the Removal Rate of Different Salts in Electrokinetic Desalination Processes
Anaerobic co-digestion of pear residues and sewage sludge using a CSTR digester. Influence of the feed procedure
Anaerobic co-digestion of pear residues with sewage sludge is feasible.
Important differences are obtained from the two feed regimes tested, with better results for the
so-called continuous feed.
The organic loading rate (OLR) is the important parameter for the methane productionUniversidad de MĂĄlaga. Campus de Excelencia Internacional AndalucĂa Tech
Etude de paléosols rouges développés sur les basaltes miocÚnes du Massif Central français : principales caractéristiques physico-chimiques de ces pédogenÚses
Effect of NaHCO3 addition on the anaerobic co-digestion of fruit and vegetable waste and sewage sludge performance
Digestion of FVW residues with sewage sludge is feasible as long as the FVW to sludge ratio
fed to the batch digester is not too large.
The pH is the main variable determining the reactor performance and can be controlled by
NaHCO3 addition.Universidad de MĂĄlaga. Campus de Excelencia Internacional AndalucĂa Tech
Hydrometallurgical extraction of Li and Co from LiCoO2 particlesâExperimental and Modeling
The use of lithium-ion batteries as energy storage in portable electronics and electric vehicles is increasing rapidly, which involves the consequent increase of battery waste. Hence, the development of reusing and recycling techniques is important to minimize the environmental impact of these residues and favor the circular economy goal. This paper presents experimental and modeling results for the hydrometallurgical treatment for recycling LiCoO2 cathodes from lithium-ion batteries. Previous experimental results for hydrometallurgical extraction showed that acidic leaching of LiCoO2 particles produced a non-stoichiometric extraction of lithium and cobalt. Furthermore, the maximum lithium extraction obtained experimentally seemed to be limited, reaching values of approximately 65â70%. In this paper, a physicochemical model is presented aiming to increase the understanding of the leaching process and the aforementioned limitations. The model describes the heterogeneous solidâliquid extraction mechanism and kinetics of LiCoO2 particles under a weakly reducing environment. The model presented here sets the basis for a more general theoretical framework that would describe the process under different acidic and reducing conditions. The model is validated with two sets of experiments at different conditions of acid concentration (0.1 and 2.5 M HCl) and solid to liquid ratio (5 and 50 g Lâ1). The COMSOL Multiphysics program was used to adjust the parameters in the kinetic model with the experimental results.This work has received funding from the European Unionâs Horizon 2020 research and innovation programme under the Marie SkĆodowska-Curie grant agreement No. 778045. Paz-Garcia acknowledges financial support from the program âProyectos I+D+i en el marco del Programa Operativo FEDER AndalucĂa 2014â2020â, No. UMA18-FEDERJA-279. Cerrillo-Gonzalez acknowledges the FPU grant obtained from the Spanish Ministry of Education. The University of Malaga is acknowledged for the financial support in the postdoctoral fellowship of Villen-Guzman
Recovery of Li and Co from LiCoO2 via HydrometallurgicalâElectrodialytic Treatment
Lithium-ion batteries play an important role in our modern society as the main option to power portable electronic devices and electric vehicles. The growing demand for these batteries encourages the development of more efficient recycling processes, aiming to decrease the environmental impact of the spent batteries and recover their valuable components. In this paper, a combined hydrometallurgical-electrodialytic method is proposed for processing battery waste. In the combined technique, the amount of leaching solution is reduced as acid is generated via electrolysis. At the same time, the use of ion-exchange membranes and the possibility of electroplating allows for a selective separation of the target metals. Experiments were performed using LiCoO2, which is one of the most used cathodes in lithium-ion batteries. First, 0.1 M HCl solution was used in batch extractions to study the kinetics of LiCoO2 dissolution, reaching an extraction of 30% and 69% of cobalt and lithium, respectively. Secondly, hydrometallurgical extraction experiments were carried out in three-compartment electrodialytic cells, enhanced with cation-exchange membranes. Experiments yielded to a selective recovery in the catholyte of 62% of lithium and 33% of cobalt, 80% of the latter electrodeposited at the cathode.This work has received funding from the European Unionâs Horizon 2020 research and innovation programme under the Marie SkĆodowska-Curie grant agreement No. 778045. Financial support from E3TECH Excellence Network under project CTQ2017-90659-REDT (MCIUN, Spain) is acknowledged. Paz-Garcia acknowledges the financial support from the program âProyectos I+D+i en el marco del Programa Operativo FEDER AndalucĂa 2014â2020â, No. UMA18-FEDERJA-279. Villen-Guzman acknowledges the postdoctoral fellowship obtained from the University of Malaga. Cerrillo-Gonzalez acknowledges the FPU grant obtained from the Spanish Ministry of Education
A Procedure for the Selection of the Optimal Extractant Agent for the Electrokinetic Remediation Treatment of Heavy Metals Contaminated Soils:Abstract of poster presentation
Chemical reduction of nitrate by zero-valent iron: Shrinking-Core versus Surface Kinetics Models
Zero valent iron (ZVI) is being used in permeable reactive barriers (PRB) for the removal of oxidant contaminants, from nitrate to chlorinated organics. A sound design of these barriers requires a good understanding of kinetics. Here we present a study of the kinetics of nitrate reduction under relatively low values of pH, from 2 to 4.5. We use a particle size of 0.42 mm, which is within the recommended size for PRBs (0.2 mm to 2.0 mm). In order to avoid possible mass-transfer limitations, a well-stirred reactor coupled with a fluidized bed reactor was used. The experiments were performed at constant pH values using a pH controller that allows to accurately track the amount of acid added. Since the reduction of H+ to H2 by the oxidation of ZVI will always be present for these pH values, blank experiments (without nitrate) were performed and the rate of this H+ reduction obtained. This rate of reduction was studied using three kinetic models: a regular empirical one, the Shrinking-Core Model (SCM), and the Surface Kinetics Model (SKM). The best performance was obtained from the SKM model. Therefore, this model was also used to study the results for the nitrate reduction, also with satisfactory results. In both cases, some assumptions are introduced to maintain a moderate number of fitting parameters.This research was funded by the European Unionâs Horizon 2020 research and innovation program under the Marie SkĆodowska-Curie grant agreement No. 778045, by the âProyectos I + D + i en el marco del Programa Operativo FEDER AndalucĂa 2014â2020, No UMA18-FEDERJA-279â and the project from the University of Malaga, No. PPIT.UMA.B5.2018/17. Villen-Guzman acknowledges the postdoctoral fellowship obtained from the University of Malaga. Cerrillo-Gonzalez acknowledges the FPU grant obtained from the Spanish Ministry of Education
- âŠ