15 research outputs found
Status of the SOLEIL femtosecond X-ray source
http://accelconf.web.cern.ch/AccelConf/FEL2012/papers/wepd04.pdfInternational audienceAn electron bunch slicing setup is presently under construction on the SOLEIL storage ring for delivering 100 fs (rms) long photon pulses to two undulator-based beamlines providing soft (TEMPO) and hard X-rays (CRISTAL). Thanks to the non-zero dispersion function present in all straight sections of the storage ring, the sliced bunches can be easily separated from the core bunches. The modulator is a wiggler composed of 20 periods of 164.4 mm. It produces a magnetic field of 1.8 T at a minimum gap of 14.5 mm. To modulate the kinetic energy of the electrons in the wiggler, a Ti:Sa laser will be used, which produces 50 fs pulses at 800 nm with a repetition rate of 2.5 kHz. The laser beam is splitted into two branches in order to provide 2 mJ to the modulator and 0.5 mJ as pump pulse for the CRISTAL and TEMPO end stations. Focusing optics and beam path, from the laser hutch to the inside of the storage ring tunnel are presently under finalization. In this paper, we will report on the specificities of the SOLEIL setup, the status of its installation and the expected performances
LUNEX5: A French FEL Test Facility Light Source Proposal
http://accelconf.web.cern.ch/AccelConf/IPAC2012/papers/tuppp005.pdfInternational audienceLUNEX5 is a new Free Electron Laser (FEL) source project aimed at delivering short and coherent X-ray pulses to probe ultrafast phenomena at the femto-second scale, to investigate extremely low density samples as well as to image individual nm scale objects
The LUNEX5 project
http://accelconf.web.cern.ch/AccelConf/FEL2012/papers/froa03.pdfInternational audienceLUNEX5 (free electron Laser Using a New accelerator for the Exploitation of X-ray radiation of 5th generation) aims at investigating the production of short, intense, and coherent pulses in the soft X-ray region. The project consists of a Free Electron Laser (FEL) line enabling the most advanced seeding configurations: High order Harmonic in Gas (HHG) seeding and Echo Enable Harmonic Generation (EEHG) with in-vacuum (potentially cryogenic) undulators of 15 and 30 mm period. Two accelerator types feed this FEL line : a 400 MeV Conventional Linear Accelerator (CLA) using superconducting cavities compatible with a future upgrade towards high repetition rate, for the investigations of the advanced FEL schemes; and a 0.4 - 1 GeV Laser Wake Field Accelerator (LWFA), to be qualified in view of FEL application, in the single spike or seeded regime. Two pilot user experiments for timeresolved studies of isolated species and solid state matter dynamics will take benefit of LUNEX5 FEL radiation and provide feedback of the performance of the different schemes under real user conditions
Commissioning of OPHeLIE: The New Electromagnetic Crossed Overlapped Undulator at Super-ACO
In vacuum permanent magnet wiggler optimized for the production of hard x rays
A new concept of wiggler has been designed and realized at SOLEIL to produce high energy photons in low/intermediate electron storage rings. Instead of using the superconducting technology which requires new equipment and instrumentation, heavy maintenance, and additional running costs, we have proposed to build a compact in-vacuum small gap short period wiggler that operates rather at moderate field than at high field. The wiggler composed of 38 periods of 50 mm produces 2.1 T at a gap of 5.5 mm. The moderate value of the magnetic field enables one to limit the effects on the beam dynamics and to avoid excessive power and magnetic forces. In this purpose, the narrow magnetic system has been equipped with a counterforce device made of nonmagnetic springs. The roll-off resulting from the small size of poles has been compensated in situ by permanent magnet magic fingers. This paper reports the phases of design, construction, magnetic measurements, and on-beam tests of the in-vacuum wiggler WSV50
Production of high energy photons with in vacuum wigglers : From SOLEIL wiggler to MAXIV wiggler
Small gap wigglers become more and more attractive to produce high photon fluxes in the hard X-ray photon range. They use magnet blocks of high magnetization which resists much better to heating (baking, synchrotron radiation) than in the past, produce high magnetic field with numerous periods and are very compact. They also are a very good alternative to superconducting technology which requires special infrastructure, heavy maintenance and is not running cost free. SOLEIL, operating presently at 2.75 GeV has designed and built an in-vacuum wiggler of 38 periods of 50 mm producing 2.1 T at a minimum gap of 5.5 mm to delivered photon beam between 20 keV and 50 keV. Already in operation, further improvements are presently in progress to push photons towards higher energy, in particular thanks to the operation at lower gap (4.5 mm). MAX IV and SOLEIL, in the frame of collaboration, ave built an upgraded version of the existing SOLEIL wiggler with the target to extend the spectral range at high energy (above 50 keV) but also at low energy (4 keV) with the same insertion device. The design of the existing magnetic system has been modified to reach 2.4 T at a minimum gap of 4.2 mm and includes taper operation to avoid undulator structure in the radiated spectrum at low energy
Development and operation of a Pr_{2}Fe_{14}B based cryogenic permanent magnet undulator for a high spatial resolution x-ray beam line
Short period, high field undulators are used to produce hard x-rays on synchrotron radiation based storage ring facilities of intermediate energy and enable short wavelength free electron laser. Cryogenic permanent magnet undulators take benefit from improved magnetic properties of RE_{2}Fe_{14}B (Rare Earth based magnets) at low temperatures for achieving short period, high magnetic field and high coercivity. Using Pr_{2}Fe_{14}B instead of Nd_{2}Fe_{14}B, which is generally employed for undulators, avoids the limitation caused by the spin reorientation transition phenomenon, and simplifies the cooling system by allowing the working temperature of the undulator to be directly at the liquid nitrogen one (77Â K). We describe here the development of a full scale (2Â m), 18Â mm period Pr_{2}Fe_{14}B cryogenic permanent magnet undulator (U18). The design, construction and optimization, as well as magnetic measurements and shimming at low temperature are presented. The commissioning and operation of the undulator with the electron beam and spectrum measurement using the Nanoscopmium beamline at SOLEIL are also reported
LUNEX5: A French FEL Test Facility Light Source Proposal
http://accelconf.web.cern.ch/AccelConf/IPAC2012/papers/tuppp005.pdfInternational audienceLUNEX5 is a new Free Electron Laser (FEL) source project aimed at delivering short and coherent X-ray pulses to probe ultrafast phenomena at the femto-second scale, to investigate extremely low density samples as well as to image individual nm scale objects