Porosity Variations Between Fine Grained Rims and Matrix in a CM Chondrite by 3D Serial Sectioning

No abstract available

Mechanism of droplet-formation in a supersonic microfluidic spray device

Spray drying is an approach employed in automotive, food, and pharmaceutical industries as a robust and cost efficient liquid atomization technique offering direct control over droplet dimensions. The majority of commercially available spray nozzles are designed for large throughput spray drying applications or uniform surface coating, but microfluidic nebulizers have recently been developed as small scale alternatives. Here, we explore the physical parameters that define the droplet size and formation under supersonic flow conditions commonly found in microfluidic spray drying systems. We examined the spray nozzle operation using high speed imaging and laser scattering measurements, which allowed us to describe the spray regimes and droplet size distributions. It was determined that by using this spray nozzle device, droplets with diameters of 4–8 μm could be generated. Moreover, we show that the supersonic de Laval nozzle model can be used to predict the average droplet size. Our approach can be used as a platform for interfacing fluid microprocessing with gas phase detection and characterization

Electrical Properties of Carbon Fiber Support Systems

Carbon fiber support structures have become common elements of detector designs for high energy physics experiments. Carbon fiber has many mechanical advantages but it is also characterized by high conductivity, particularly at high frequency, with associated design issues. This paper discusses the elements required for sound electrical performance of silicon detectors employing carbon fiber support elements. Tests on carbon fiber structures are presented indicating that carbon fiber must be regarded as a conductor for the frequency region of 10 to 100 MHz. The general principles of grounding configurations involving carbon fiber structures will be discussed. To illustrate the design requirements, measurements performed with a silicon detector on a carbon fiber support structure at small radius are presented. A grounding scheme employing copper-kapton mesh circuits is described and shown to provide adequate and robust detector performance.Comment: 20 pages, 11 figures, submitted to NI

Demanding stories: television coverage of sustainability, climate change and material demand

This paper explores the past, present and future role of broadcasting, above all via the medium of television, in shaping how societies talk, think about and act on climate change and sustainability issues. The paper explores these broad themes via a focus on the important but relatively neglected issue of material demand and opportunities for its reduction. It takes the outputs and decision-making of one of the world’s most influential broadcasters, the BBC, as its primary focus. The paper considers these themes in terms of stories, touching on some of the broader societal frames of understanding into which they can be grouped. Media decision-makers and producers from a range of genres frequently return to the centrality of ‘story’ in the development, commissioning and production of an idea. With reference to specific examples of programming, and drawing on interviews with media practitioners, the paper considers the challenges of generating broadcast stories that can inspire engagement in issues around climate change, and specifically material demand. The concluding section proposes actions and approaches that might help to establish material demand reduction as a prominent way of thinking about climate change and environmental issues more widely. This article is part of the themed issue ‘Material demand reduction’

Effects of Defects on Friction for a Xe Film Sliding on Ag(111)

The effects of a step defect and a random array of point defects (such as vacancies or substitutional impurities) on the force of friction acting on a xenon monolayer film as it slides on a silver (111) substrate are studied by molecular dynamic simulations and compared with the results of lowest order perturbation theory in the substrate corrugation potential. For the case of a step, the magnitude and velocity dependence of the friction force are strongly dependent on the direction of sliding respect to the step and the corrugation strength. When the applied force F is perpendicular to the step, the film is pinned forF less than a critical force Fc. Motion of the film along the step, however, is not pinned. Fluctuations in the sliding velocity in time provide evidence of both stick-slip motion and thermally activated creep. Simulations done with a substrate containing a 5 percent concentration of random point defects for various directions of the applied force show that the film is pinned for the force below a critical value. The critical force, however, is still much lower than the effective inertial force exerted on the film by the oscillations of the substrate in experiments done with a quartz crystal microbalance (QCM). Lowest order perturbation theory in the substrate potential is shown to give results consistent with the simulations, and it is used to give a physical picture of what could be expected for real surfaces which contain many defects.Comment: 13 pages, 17 figures, latex plus postscript files for figure

Biochemical Characterization of a Filtered Synaptoneurosome Preparation from Guinea Pig Cerebral Cortex: Cyclic Adenosine 3’:5’-Monophosphate-generating Systems, Receptors, and Enzymes

A particulate preparation was obtained by low speed centrifugation of guinea pig cerebral cortical homogenates prepared with a Krebs-Henseleit buffer. Light microscopic examination, using a reflected light differential interference contrast system, reveals the presence of intact neurons, axonal fragments, glial cells, and erythrocytes along with an abundance of small spherical entities (diameter about 1.1 μm) and snowman-shaped entities (diameter of larger sphere about 1.1 μm, diameter of attached smaller sphere about 0.6 μm). Many unattached smaller spherical entities are also present (diameter about 0.6 μm). Pressure filtration through 5 or l0-μm Millipore filters, followed by low speed centrifugation and resuspension, removes most of the larger entities to afford a suspension composed mainly of the small spherical and snowman-shaped entities. Electron microscopic examination reveals the presence of many synaptosomes with attached resealed postsynaptic entities. It is proposed that these correspond to the snowman-shaped entities to be termed synaptoneurosomes. Accumulations of cyclic AMP elicited by 2-chloroadenosine and histamine, and by combinations of 2-chloroadenosine, histamine, norepinephrine, and forskolin, are lower in filtered than in unfiltered preparations, whereas accumulations elicited by forskolin are unchanged. Levels of adenylate cyclase are reduced by filtration, whereas levels of phosphodiesterase are unchanged. Filtration reduces levels of markers for whole cells and endothelial cells, whereas neuronal markers such as acetylcholinesterase activity and norepinephrine uptake are increased. Levels of S-100 protein, a marker for glial cells, are not significantly decreased. There is no apparent change in the density of many receptors or ion channels. Levels of A1-adenosine and H1-histamine receptors are increased, whereas levels of so-called peripheral benzodiazepine-binding sites are decreased