Consecutive retrieval with redundancy: an optimal linear and an optimal cyclic arrangement and their storage space requirements

Information retrieval, file organization, consecutive retrieval property, consecutive retrieval with redundancy, storage space requirements 1

Compressive and tensile axial strain reduced critical currents in Bi-2212 conductors

Mono and multifilamentary wires of BSCCO-2212 in Ag matrix are investigated in an axial strain experiment. The superconducting samples are soldered to a substrate that is bend in order to achieve a compressive or tensile axial strain. The I/sub c/-strain dependence is measured in magnetic fields up to 16 T at 4.2 K and the strain is varied from -2% to +1.2%. In these Bi-2122 samples any strain-induced I/sub c/ reduction is irreversible. Moreover a significant rise in I/sub c/ was never observed after changing the strain. Special attention is paid to the tensile axial strain regime (0 to 0.4%). A small but significant reduction in I/sub c/ is found in this case. The strain behaviour of these wires indicates that the I/sub c/ reduction is due to fractures in the superconducting filament

Field dependence of the critical current and its relation to the anisotropy of BSCCO conductors and coils

The design of HTS magnets is often based on the properties of a number of short samples that are presumed to be representative of the conductor to be used. Variability in conductor properties and inhomogeneity in the magnetic field distribution within the magnets, coupled with conductor anisotropy, provide a significant challenge to accurately predict the field dependence of the magnet critical current. This work is based on measured superconducting properties of Bi-2212 and Bi-2223 conductors at 4.2 K in parallel and perpendicular magnetic fields up to 33 T. Properties of double pancake units and stacks, from the same or similar conductor batches, are presented, based on measurements at self-field and in applied co-axial background magnetic fields up to 19 T. Modeling of this data is based on short sample properties in perpendicular field; the average grain misalignment is used as the parameter to quantify the anisotropy. Correlations and discrepancies between the measured data and models based on short sample data are discussed for Bi-2212 and Bi-2223 conductors

Utilising intrinsic robustness in agricultural production systems: Inventions for a sustainable development of agriculture

This paper explores the potential of utilising robust crops and livestock for improving sustainability of agriculture. Two approaches for dealing with unwanted fluctuations that may influence agricultural production, such as diseases and pests, are discussed. The prevailing approach, which we call the ‘Control Model’, is to protect crops and livestock from disturbances as much as possible, to regain balance with monitoring and intervention and to look for add-on solutions only. There are a number of problems associated with the Control Model, including reduced animal welfare, environmental pollution and low public support. An alternative approach, which we call the ‘Adaptation Model’, is based on reducing the consequences of disturbances rather than taking disturbances ou

Sensor failure detection and recovery by neural networks

A new method of sensor failure detection, isolation, and accommodation is described using a neural network approach. In a propulsion system such as the Space Shuttle Main Engine, the dynamics are usually much higher than the order of the system. This built-in redundancy of the sensors can be utilized to detect and correct sensor failure problems. The goal of the proposed scheme is to train a neural network to identify the sensor whose measurement is not consistent with other sensor outputs. Another neural network is trained to recover the value of critical variables when their measurements fail. Techniques for training the network with a limited amount of data are developed. The proposed scheme is tested using the simulated data of the Space Shuttle Main Engine (SSME) inflight sensor group

Status of introductory computer education in the Netherlands: results of a survey

The International Association for the Evaluation of Educational Achievement (IEA) is conducting an international comparative study on educational computer use in more than 20 countries. This paper analyzes some of the Dutch results of the IEA survey on the use of computers in lower secondary schools. The findings show that at present computers are mainly used for introductory computer courses, but that the integration of computers into existing subjects is still limited. The main problems identified in the study are: insufficient availability of courseware and hardware, time constraints and a high need for teacher training