21,094 research outputs found
Contributions of Vacuum and Plasmon Modes to the Force on a Small Sphere near a Plate
The force on a small sphere with a plasma model dielectric function and in
the presence of a perfectly reflecting plane is considered. The contribution of
both the vacuum modes of the quantized electromagnetic field and of plasmon
modes in the sphere are discussed. In the case that the plasmon modes are in
their ground state, quasi-oscillatory terms from the vacuum and plasmon parts
cancel one another, leading a monotonic attractive force. If the plasmon modes
are not in the ground state, the net force is quasi-oscillatory. In both cases,
the sphere behaves in the same way as does an atom in either its ground state
or an excited state.Comment: 7 pages, no figures, talk presented at "Quantum Fields under External
Conditions - 2005", Barcelona, Spain, September 200
Future mobile satellite communication concepts at 20/30 GHz
The outline of a design of a system using ultra small earth stations (picoterminals) for data traffic at 20/30 GHz is discussed. The picoterminals would be battery powered, have an RF transmitter power of 0.5 W, use a 10 cm square patch antenna, and have a receiver G/T of about -8 dB/K. Spread spectrum modulation would be required (due to interference consideration) to allow a telex type data link (less than 200 bit/s data rate) from the picoterminal to the hub station of the network and about 40 kbit/s on the outbound patch. An Olympus type transponder at 20/30 GHz could maintain several thousand simultaneous picoterminal circuits. The possibility of demonstrating a picoterminal network with voice traffic using Olympus is discussed together with fully mobile systems based on this concept
Casimir-Polder forces, boundary conditions and fluctuations
We review different aspects of the atom-atom and atom-wall Casimir-Polder
forces. We first discuss the role of a boundary condition on the interatomic
Casimir-Polder potential between two ground-state atoms, and give a physically
transparent interpretation of the results in terms of vacuum fluctuations and
image atomic dipoles. We then discuss the known atom-wall Casimir-Polder force
for ground- and excited-state atoms, using a different method which is also
suited for extension to time-dependent situations. Finally, we consider the
fluctuation of the Casimir-Polder force between a ground-state atom and a
conducting wall, and discuss possible observation of this force fluctuation.Comment: 5 page
GAELS Project Final Report: Information environment for engineering
The GAELS project was a collaboration commenced in 1999 between Glasgow University Library and Strathclyde University Library with two main aims:· to develop collaborative information services in support of engineering research at the Universities of Glasgow and Strathclyde· to develop a CAL (computer-aided learning package) package in advanced information skills for engineering research students and staff The project was funded by the Scottish Higher Education Funding Council (SHEFC) from their Strategic Change Initiative funding stream, and funding was awarded initially for one year, with an extension of the grant for a further year. The project ended in June 2001.The funding from SHEFC paid for two research assistants, one based at Glasgow University Library working on collaborative information services and one based at Strathclyde University Library developing courseware. Latterly, after these two research assistants left to take up other posts, there has been a single researcher based at Glasgow University Library.The project was funded to investigate the feasibility of new services to the Engineering Faculties at both Universities, with a view to making recommendations for service provision that can be developed for other subject areas
Feasibility of using neutron radiography to inspect the Space Shuttle solid rocket booster aft skirt, forward skirt and frustum. Part 1: Summary report
The space shuttle's solid rocket boosters (SRB) include components made primarily of aluminum that are parachuted back for retrieval from the ocean and refurbished for repeated usage. Nondestructive inspection methods used on these aging parts to reduce the risk of unforeseen problems include x-ray, ultrasonics, and eddy current. Neutron radiography tests on segments of an SRB component show that entrapped moisture and naturally occurring aluminum corrosion can be revealed by neutron radiography even if present in only small amounts. Voids in sealant can also be evaluated. Three alternatives are suggested to follow-up this study: (1) take an SRB component to an existing neutron radiography system; (2) take an existing mobile neutron radiography system to the NASA site; or (3) plan a dedicated system custom designed for NASA applications
Large Pseudo-Counts and -Norm Penalties Are Necessary for the Mean-Field Inference of Ising and Potts Models
Mean field (MF) approximation offers a simple, fast way to infer direct
interactions between elements in a network of correlated variables, a common,
computationally challenging problem with practical applications in fields
ranging from physics and biology to the social sciences. However, MF methods
achieve their best performance with strong regularization, well beyond Bayesian
expectations, an empirical fact that is poorly understood. In this work, we
study the influence of pseudo-count and -norm regularization schemes on
the quality of inferred Ising or Potts interaction networks from correlation
data within the MF approximation. We argue, based on the analysis of small
systems, that the optimal value of the regularization strength remains finite
even if the sampling noise tends to zero, in order to correct for systematic
biases introduced by the MF approximation. Our claim is corroborated by
extensive numerical studies of diverse model systems and by the analytical
study of the -component spin model, for large but finite . Additionally
we find that pseudo-count regularization is robust against sampling noise, and
often outperforms -norm regularization, particularly when the underlying
network of interactions is strongly heterogeneous. Much better performances are
generally obtained for the Ising model than for the Potts model, for which only
couplings incoming onto medium-frequency symbols are reliably inferred.Comment: 25 pages, 17 figure
A near infrared line list for \NH: Analysis of a Kitt Peak spectrum after 35 years
A Fourier Transform (FT) absorption spectrum of room temperature NH3 in the
region 7400 - 8600 cm-1 is analysed using a variational line list and ground
state energies determined using the MARVEL procedure. The spectrum was measured
by Dr Catherine de Bergh in 1980 and is available from the Kitt Peak data
center. The centers and intensities of 8468 ammonia lines were retrieved using
a multiline fitting procedure. 2474 lines are assigned to 21 bands providing
1692 experimental energies in the range 7000 - 9000 cm-1. The spectrum was
assigned by the joint use of the BYTe variational line list and combination
differences. The assignments and experimental energies presented in this work
are the first for ammonia in the region 7400 - 8600 cm-1, considerably
extending the range of known vibrational-excited statesComment: 27 pages, 6 table, 5 figures. Accepted for publication in Journal of
Molecular Spectroscop
Relic Abundances and the Boltzmann Equation
I discuss the validity of the quantum Boltzmann equation for the calculation
of WIMP relic densities.Comment: 5 pages, no figures; talk given at Dark Matter 2000; an important
reference is added in the revised versio
A review of residual stress analysis using thermoelastic techniques
Thermoelastic Stress Analysis (TSA) is a full-field technique for experimental stress analysis
that is based on infra-red thermography. The technique has proved to be extremely effective for
studying elastic stress fields and is now well established. It is based on the measurement of the
temperature change that occurs as a result of a stress change. As residual stress is essentially a
mean stress it is accepted that the linear form of the TSA relationship cannot be used to
evaluate residual stresses. However, there are situations where this linear relationship is not
valid or departures in material properties due to manufacturing procedures have enabled
evaluations of residual stresses. The purpose of this paper is to review the current status of
using a TSA based approach for the evaluation of residual stresses and to provide some
examples of where promising results have been obtained
- …