34,987 research outputs found
Effect of carbide distribution on rolling-element fatigue life of AMS 5749
Endurance tests with ball bearings made of corrosion resistant bearing steel which resulted in fatigue lives much lower than were predicted are discussed. Metallurgical analysis revealed an undesirable carbide distribution in the races. It was shown in accelerated fatigue tests in the RC rig that large, banded carbides can reduce rolling element fatigue life by a factor of approximately four. The early spalling failures on the bearing raceways are attributed to the large carbide size and banded distribution
An investigation of rooftop STOL port aerodynamics
An investigation into aerodynamic problems associated with large building rooftop STOLports was performed. Initially, a qualitative flow visualization study indicated two essential problems: (1) the establishment of smooth, steady, attached flow over the rooftop, and (2) the generation of acceptable crosswind profile once (1) has been achieved. This study indicated that (1) could be achieved by attaching circular-arc rounded edge extensions to the upper edges of the building and that crosswind profiles could be modified by the addition of porous vertical fences to the lateral edges of the rooftop. Important fence parameters associated with crosswind alteration were found to be solidity, fence element number and spacing. Large scale building induced velocity fluctuations were discovered for most configurations tested and a possible explanation for their occurrence was postulated. Finally, a simple equation relating fence solidity to the resulting velocity profile was developed and tested for non-uniform single element fences with 30 percent maximum solidity
Metal (2) 4,4',4",4'" phthalocyanine tetraamines as curing agents for epoxy resins
Metal, preferably divalent copper, cobalt or nickel, phthalocyanine tetraamines are used as curing agents for epoxides. The resulting copolymers have high thermal and chemical resistance and are homogeneous. They are useful as binders for laminates, e.g., graphite cloth laminate
Metal phthalocyanine intermediates for the preparation of polymers
Metal 4, 4', 4"",-tetracarboxylic phthalocyanines (MPTC) are prepared by reaction of trimellitic anhydride, a salt or hydroxide of the desired metal (or the metal in powdered form), urea and a catalyst. A purer form of MPTC is prepared than heretofore. These tetracarboxylic acids are then polymerized by heat to sheet polymers which have superior heat and oxidation resistance. The metal is preferably a divalent metal having an atomic radius close to 1.35A
Thomas-Fermi versus one- and two-dimensional regimes of a trapped dipolar Bose-Einstein condensate
We derive the criteria for the Thomas-Fermi regime of a dipolar Bose-Einstein
condensate in cigar, pancake and spherical geometries. This also naturally
gives the criteria for the mean-field one- and two-dimensional regimes. Our
predictions, including the Thomas-Fermi density profiles, are shown to be in
excellent agreement with numerical solutions. Importantly, the anisotropy of
the interactions has a profound effect on the Thomas-Fermi/low-dimensional
criteria.Comment: 5 pages, 2 figure
- …