Influence of ligand shape and steric hindrance on the composition of the nanocrystal ligand shell

Organic ligands play a key role in the synthesis of colloidal semiconductor nanocrystals or quantum dots. Generally they consist of a functional group and an aliphatic chain, with carboxylic acids, thiols and phosphonic acids as typical examples. The functional group ensures the binding to the nanocrystal surface, while the stability of the dispersion strongly depends on the interactions between the organic chains of the adjacent ligands. A number of studies already addressed the binding strength and the type of binding between the nanocrystal surface and the ligand yet none discuss the effect of the organic chain on the ligand exchange. By means of NMR spectroscopy, we examine the ligand shell composition of CdSe nanocrystals originally capped with oleic acid (OA), when exposed to a linear carboxylic acid. Regardless of chain length, we see a one-to-one exchange between the carboxylic acids. The composition of the ligand shell closely matches that of the ligand mixture in solution, indicating that the ligand shell can be seen as an ideal mixture of both ligands. As a consequence, a mixed ligand shell can easily be prepared by adding a ligand mixture with desired composition to the nanocrystal dispersion. On the other hand, when the CdSe nanocrystals are exposed to a branched carboxylic acid with two long aliphatic chains, like 2-hexyldecanoic acid, the ligand shell mainly consists of OA moieties. We interpret these results using an exchange process where the incoming ligand not only displaces oleic acid but also occupies additional space in the ligand shell to accommodate both aliphatic chains. Hence, given a one-for-one exchange reaction, steric hindrance in a fully packed ligand shell will prevent complete ligand exchange. These results can be very useful in view of producing nanocrystals with lower ligand densities by means of synthesis with these branched carboxylic acids

Identification of Free and Bound Exciton States and Their Phase-Dependent Trapping Behavior in Lead Halide Perovskites

In this work we probe the sub-gap energy states within polycrystalline and single crystal lead halide perovskites to better understand their intrinsic photophysics behaviors. Through combined temperature and intensity-dependent optical measurements, we reveal the existence of both free and bound exciton contributions within the sub-gap energy state manifold. The trapping and recombination dynamics of these excitons is shown to be strongly dependent on the structural phase of the perovskite. The orthorhombic phase exhibits ultrafast exciton trapping and distinct trap emission, while the tetragonal phase gives low monomolecular recombination velocity and capture cross-sections (~10-18 cm2). Within the multiphonon transition scenario, this suppression in charge trapping is caused by the increase in the charge capture activation energy due to the reduction in electron-lattice interactions, which can be the origin for the unexpected long carrier lifetime in these material systems.Comment: 5 figure

Lead-free Magnetic Double Perovskites for Photovoltaic and Photocatalysis Applications

The magnetic spin degrees of freedom in magnetic materials serve as additional capability to tune materials properties, thereby invoking magneto-optical response. Herein, we report the magneto-optoelectronic properties of a family of lead-free magnetic double perovskites Cs_{2}AgTX_{6} (T = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu; X=Cl, Br, I). This turns out to provide an extremely fertile series, giving rise to potential candidate materials for photovoltaic(PV) applications. In conjunction with high absorption coefficient and high simulated power conversion efficiency for PV applications, few compounds in this series exhibit novel magnetic character useful for spintronic applications. The interaction between magnetism and light can have far-reaching results on the photovoltaic properties as a consequence of the shift in the defect energy levels due to Zeeman effect. This subsequently affects the recombination rate of minority carriers, and hence the photoconversion efficiency. Moreover, the distinct ferromagnetic and anti-ferromagnetic ordering driven by hybridization and super-exchange mechanism can play a significant role to break the time-reversal and/or inversion symmetry. Such a coalescence of magnetism and efficient optoelectronic response has the potential to trigger magnetic/spin anomalous photovoltaic (non-linear Optical) effect in this Cs$_{2}$AgTX$_{6}$ family. These insights can thus channelize the advancement of lead-free double perovskites in magnetic/spin anomalous photovoltaic field as well.Comment: 9 pages, 5 figures, 1 tabl

Photo-doping of plasma-deposited polyaniline (PAni)

Although polyaniline (PAni) has been studied extensively in the past, little work has been done on producing films of this material via plasma deposition. We have synthesized and analysed the photoresponse behavior of plasma-deposited polyaniline films and proceeded to dope the films using light and with various metal ions. Upon illumination, the photocurrent responses of the thin plasma films increased over time, and the response was dependent on the film thickness. On doping the film with metal ions, the photocurrent densities were enhanced from nano- to micro-amperes per square centimeters. Doping seemed, however, to cause the films to become unstable. Despite this setback, which requires further research, the drastic increase in current shows great promise for the development of plasma-deposited polyaniline films for application in the area of organic electronics and photovoltaics

Switchable surface coatings for control over protein adsorption

Control over biomolecule interactions at interfaces is becoming an increasingly important goal for a range of scientific fields and is being intensively studied in areas of biotechnological, biomedical and materials science. Improvement in the control over materials and biomolecules is particularly important to applications such as arrays, biosensors, tissue engineering, drug delivery and 'lab on a chip' devices. Further development of these devices is expected to be achieved with thin coatings of stimuli responsive materials that can have their chemical properties 'switched' or tuned to stimulate a certain biological response such as adsorptionldesorption of proteins. Switchable coatings show great potential for the realisation of spatial and temporal immobilisation of cells and biomolecules such as DNA and proteins. This study focuses on protein adsorption onto coatings of the thermosensitive polymer poly(N-isopropylacrylamide) (pNIPAM) which can exhibit low and high protein adsorption properties based on its temperature dependent conformation. At temperatures above its lower critical solution temperature (LCST) pNIPAM polymer chains are collapsed and protein adsorbing whilst below the LCST they are hydrated and protein repellent. Coatings of pNIPAM on silicon wafers were prepared by free radical polymerisation in the presence of surface bound polymerisable groups. Surface analysis and protein adsorption was carried out using X-ray photoelectron spectroscopy, time of flight secondary ion mass spectrometry and contact angle measurements. This study is expected to aid the development of stimuli-responsive coatings for biochips and biodevices.Bellingham, US

Rapid laser-induced low temperature crystallization of thermochromic VO2 sol-gel thin films

The thermochromic properties of vanadium dioxide (VO2) offer great advantages for energy-saving smart windows, memory devices, and transistors. However, the crystallization of solution-based thin films at temperatures lower than 400°C remains a challenge. Photonic annealing has recently been exploited to crystallize metal oxides, with minimal thermal damage to the substrate and reduced manufacturing time. Here, VO2 thin films, obtained via a green sol–gel process, were crystallized by pulsed excimer laser annealing. The influence of increasing laser fluence and pulse number on the film properties was systematically studied through optical, structural, morphological, and chemical characterizations. From temperature profile simulations, the temperature rise was confirmed to be confined within the film during the laser pulses, with negligible substrate heating. Threshold laser parameters to induce VO2 crystallization without surface melting were found. With respect to furnace annealing, both the crystallization temperature and the annealing time were substantially reduced, with VO2 crystallization being achieved within only 60 s of laser exposure. The laser processing was performed at room temperature in air, without the need of a controlled atmosphere. The thermochromic properties of the lasered thin films were comparable with the reference furnace-treated samples

Linking vertical bulk-heterojunction composition and transient photocurrent dynamics in organic solar cells with solution-processed MoOx contact layers

It is demonstrated that a combination of microsecond transient photocurrent measurements and fi lm morphology characterization can be used to identify a charge-carrier blocking layer within polymer:fullerene bulk-heterojunction solar cells. Solution-processed molybdenum oxide (s-MoO x ) interlayers are used to control the morphology of the bulk-heterojunction. By selecting either a low- or high-temperature annealing (70 C or 150 C) for the s-MoO x layer, a well-performing device is fabricated with an ideally interconnected, high-efficiency morphology, or a device is fabricated in which the fullerene phase segregates near the hole extracting contact preventing efficient charge extraction. By probing the photocurrent dynamics of these two contrasting model systems as a function of excitation voltage and light intensity, the optoelectronic responses of the solar cells are correlated with the vertical phase composition of the polymer:fullerene active layer, which is known from dynamic secondary-ion mass spectroscopy (DSIMS). Numerical simulations are used to verify and understand the experimental results. The result is a method to detect poor morphologies in operating organic solar cells

Antifungal coatings by caspofungin immobilization onto biomaterials surfaces via a plasma polymer interlayer

Published Online: 14 October 2015Not only bacteria but also fungal pathogens, particularly Candida species, can lead to biofilm infections on biomedical devices. By covalent grafting of the antifungal drug caspofungin, which targets the fungal cell wall, onto solid biomaterials, a surface layer can be created that might be able to provide long-term protection against fungal biofilm formation. Plasma polymerization of propionaldehyde (propanal) was used to deposit a thin (∼20 nm) interfacial bonding layer bearing aldehyde surface groups that can react with amine groups of caspofungin to form covalent interfacial bonds for immobilization. Surface analyses by x-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry confirmed the intended grafting and uniformity of the coatings, and durability upon extended washing. Testing for fungal cell attachment and ensuing biofilm formation showed that caspofungin retained activity when covalently bound onto surfaces, disrupting colonizing Candida cells. Mammalian cytotoxicity studies using human primary fibroblasts indicated that the caspofungin-grafted surfaces were selective in eliminating fungal cells while allowing attachment and spreading of mammalian cells. These in vitro data suggest promise for use as antifungal coatings, for example, on catheters, and the use of a plasma polymer interlayer enables facile transfer of the coating method onto a wide variety of biomaterials and biomedical devices.Stefani S. Griesser, Marek Jasieniak, Bryan R. Coad, and Hans J. Griesse