1,403 research outputs found
The 2mrad horizontal crossing angle IR layout for a TeV ILC
The current status of the 2mrad crossing angle layout for the ILC is
reviewed. The scheme developed in the UK and France is described and the
performance discussed for a TeV machine. Secondly, the scheme developed at SLAC
and BNL is then studied and modified for a TeV machine. We find that both
schemes can handle the higher energy beam with modifications, and share many
common features.Comment: The proceedings of the 2005 International Linear Collider Workshop,
March 2005. 4 pages, 5 figure
Routinely collected data and patient-centred research in anaesthesia and peri-operative care:a narrative review
Joint-Angle Coordination Patterns Ensure Stabilization of a Body-Plus-Tool System in Point-to-Point Movements with a Rod
When performing a goal-directed action with a tool, it is generally assumed that the point of control of the action system is displaced from the hand to the tool, implying that body and tool function as one system. Studies of how actions with tools are performed have been limited to studying either end-effector kinematics or joint-angle coordination patterns. Because joint-angle coordination patterns affect end-effector kinematics, the current study examined them together, with the aim of revealing how body and tool function as one system. Seated participants made point-to-point movements with their index finger, and with rods of 10, 20, and 30 cm attached to their index finger. Start point and target were presented on a table in front of them, and in half of the conditions a participant displacement compensated for rod length. Results revealed that the kinematics of the rod’s tip showed higher peak velocity, longer deceleration time, and more curvature with longer rods. End-effector movements were more curved in the horizontal plane when participants were not displaced. Joint-angle trajectories were similar across rod lengths when participants were displaced, whereas more extreme joint-angles were used with longer rods when participants were not displaced. Furthermore, in every condition the end-effector was stabilized to a similar extent; both variability in joint-angle coordination patterns that affected end-effector position and variability that did not affect end-effector position increased in a similar way vis-à -vis rod length. Moreover, the increase was higher in those conditions, in which participants were not displaced. This suggests that during tool use, body and tool are united in a single system so as to stabilize the end-effector kinematics in a similar way that is independent of tool length. In addition, the properties of the actual trajectory of the end-effector, as well as the actual joint-angles used, depend on the length of the tool and the specifics of the task
Estuarine behaviour of European silver eel (<i>Anguilla anguilla</i>) in the Scheldt estuary
Estuaries are among the most productive ecosystems in the world and are characterised by high habitat diversity. As transition areas between inland rivers and the open sea, they function as transport zones for diadromous species like the European eel (Anguilla anguilla), a catadromous fish species that migrates to the Sargasso Sea for spawning. However, information on the migratory behaviour of eel in estuaries is scarce. Therefore, more insight is needed to efficiently restore and conserve the species. We tracked 47 eels with acoustic telemetry between July 2012 and October 2015 and analysed their behaviour from the Braakman creek into the Scheldt Estuary, separated by a tidal barrier. Eels arrived in the Braakman between mid-summer and early winter and stayed there on average 44 days (0 - 578 days). As such, arrival in the Scheldt Estuary was much later: between early autumn and early winter. The average residence time in the Scheldt Estuary was considerably shorter than in the Braakman, and was only five days (0 - 64 days). The long residence time in the Braakman was probably due to the discontinuous operation of the tidal barrier, which is used to control the water level in the upstream wetland area. This resulted in a discontinuous flow conditions, leading to searching behaviour in eels. Eventually 37 eels did pass the sluice and reached the Scheldt Estuary; the 10 eels which did not pass the sluice were probably caught by a commercial eel fisherman in the Braakman creek. In the Scheldt Estuary, 26 eels migrated towards the sea, whereas eight took the opposite direction and three were only detected at the first receivers downstream of the sluice. The eight eels that did not migrate towards the sea showed estuarine retention behaviour. They could have been injured by the tidal barrier or missed the right moment to migrate, and could be waiting in the estuary until favourable conditions are met to proceed their journey. Our results indicate that eel migration is obstructed by a tidal barrier, which resulted in delayed eel migration. As the migratory period occurred from mid-summer to early winter, this information can be implemented in management plans such as environmental windows to open the sluice during eel migration if circumstances allow such measurements
COVID-19 coronavirus: recommended personal protective equipment for the orthopaedic and trauma surgeon
PURPOSE: With the COVID-19 crisis, recommendations for personal protective equipment (PPE) are necessary for protection in orthopaedics and traumatology. The primary purpose of this study is to review and present current evidence and recommendations for personal protective equipment and safety recommendations for orthopaedic surgeons and trauma surgeons. METHODS: A systematic review of the available literature was performed using the keyword terms “COVID-19”, “Coronavirus”, “surgeon”, “health-care workers”, “protection”, “masks”, “gloves”, “gowns”, “helmets”, and “aerosol” in several combinations. The following databases were assessed: Pubmed, Cochrane Reviews, Google Scholar. Due to the paucity of available data, it was decided to present it in a narrative manner. In addition, participating doctors were asked to provide their guidelines for PPE in their countries (Austria, Luxembourg, Switzerland, Germany, UK) for consideration in the presented practice recommendations. RESULTS: World Health Organization guidance for respiratory aerosol-generating procedures (AGPs) such as intubation in a COVID19 environment was clear and included the use of an FFP3 (filtering face piece level 3) mask and face protection. However, the recommendation for surgical AGPs, such as the use of high-speed power tools in the operating theatre, was not clear until the UK Public Health England (PHE) guidance of 27 March 2020. This guidance included FFP3 masks and face protection, which UK surgeons quickly adopted. The recommended PPE for orthopaedic surgeons, working in a COVID19 environment, should consist of level 4 surgical gowns, face shields or goggles, double gloves, FFP2-3 or N95-99 respirator masks. An alternative to the mask, face shield and goggles is a powered air-purifying respirator, particularly if the surgeons fail the mask fit test or are required to undertake a long procedure. However, there is a high cost and limited availabilty of these devices at present. Currently available surgical helmets and toga systems may not be the solution due to a permeable top for air intake. During the current COVID-19 crisis, it appeared that telemedicine can be considered as an electronic personal protective equipment by reducing the number of physical contacts and risk contamination. CONCLUSION: Orthopaedic and trauma surgery using power tools, pulsatile lavage and electrocautery are surgical aerosol-generating procedures and all body fluids contain virus particles. Raising awareness of these issues will help avoid occupational transmission of COVID-19 to the surgical team by aerosolization of blood or other body fluids and hence adequate PPE should be available and used during orthopaedic surgery. In addition, efforts have to be made to improve the current evidence in this regard
Effect of Sn on generalized stacking fault energy surfaces in zirconium and its hydrides
Hydrogen embrittlement in Zr alloy fuel cladding is a primary safety concern
for water based nuclear reactors. Here we investigated the stabilisation of
planar defects within the forming hydrides by Sn, the primary alloying element
of Zircaloy-4 used in the cladding. In order to explain formation of hydrides
and planar defects observed in our experiments, we performed atomic-scale ab
initio calculations focusing on the solute interactions with generalized
stacking faults in hcp -Zr and fcc zirconium hydrides. Our calculations
showed that an increase in Sn concentration leads to a stabilisation of
stacking faults in both -Zr and hydride phases. However, the solution
enthalpy of Sn is lower in the -Zr as compared to the other hydride
phases indicative of two competing processes of Sn depletion/enrichment at the
Zr hydride/matrix interface. This is corroborated by experimental findings,
where Sn is repelled by hydrides and is mostly found trapped at interfaces and
planar defects indicative of stacking faults inside the hydride phases. Our
systematic investigation enables us to understand the presence and distribution
of solutes in the hydride phases, which provides a deeper insight into the
microstructural evolution of such alloy's properties during its service
lifetime.Comment: 17 pages, 8 figure
- …