MOx/CNTs Hetero-Structures for Gas Sensing Applications: Role of CNTs Defects

n/

Use of facile mechanochemical method to functionalize carbon nanofibers with nanostructured polyaniline and their electrochemical capacitance

A facile approach to functionalize carbon nanofibers [CNFs] with nanostructured polyaniline was developed via in situ mechanochemical polymerization of polyaniline in the presence of chemically treated CNFs. The nanostructured polyaniline grafting on the CNF was mainly in a form of branched nanofibers as well as rough nanolayers. The good dispersibility and processability of the hybrid nanocomposite could be attributed to its overall nanostructure which enhanced its accessibility to the electrolyte. The mechanochemical oxidation polymerization was believed to be related to the strong Lewis acid characteristic of FeCl3 and the Lewis base characteristic of aniline. The growth mechanism of the hierarchical structured nanofibers was also discussed. After functionalization with the nanostructured polyaniline, the hybrid polyaniline/CNF composite showed an enhanced specific capacitance, which might be related to its hierarchical nanostructure and the interaction between the aromatic polyaniline molecules and the CNFs

Vapor grown carbon nanofiber based cotton fabrics with negative thermoelectric power

Vapor grown carbon nanofiber (CNF) based ink dispersions were used to dip-coat woven cotton fabrics with different constructional parameters, and their thermoelectric (TE) properties studied at room temperature. Unlike the positive thermoelectric power (TEP) observed in TE textile fabrics produced with similar carbon-based nanostructures, the CNF-based cotton fabrics showed negative TEP, caused by the compensated semimetal character of the CNFs and the highly graphitic nature of their outer layers, which hinders the p-type doping with oxygen groups onto them. A dependence of the electrical conductivity (r) and TEP as a function of the woven cotton fabric was also observed. The cotton fabric with the largest linear density (tex) showed the best performance with negative TEP values around - 8 lV K-1 , a power factor of 1.65 9 10-3 lW m-1 K-2 , and a figure of merit of 1.14 9 10-6 . Moreover, the possibility of a slight e- charge transfer or n-doping from the cellulose onto the most external CNF graphitic shells was also analysed by computer modelling. This study presents n-type carbon-based TE textile fabrics produced easily and without any functionalization processes to prevent the inherent doping with oxygen, which causes the typical p-type character found in most carbon-based TE materialsFEDER funds through COMPETE and by national funds through FCT – Foundation for Science and Technology within the project POCI-01-0145- FEDER-007136. E. M. F. Vieira is grateful for financial support through FCT with CMEMS-UMinho Strategic Project UIDB/ 04436/202

Effect of Covalent Functionalisation on Thermal Transport Across Graphene-Polymer Interfaces

This paper is concerned with the interfacial thermal resistance for polymer composites reinforced by various covalently functionalised graphene. By using molecular dynamics simulations, the obtained results show that the covalent functionalisation in graphene plays a significant role in reducing the graphene-paraffin interfacial thermal resistance. This reduction is dependent on the coverage and type of functional groups. Among the various functional groups, butyl is found to be the most effective in reducing the interfacial thermal resistance, followed by methyl, phenyl and formyl. The other functional groups under consideration such as carboxyl, hydroxyl and amines are found to produce negligible reduction in the interfacial thermal resistance. For multilayer graphene with a layer number up to four, the interfacial thermal resistance is insensitive to the layer number. The effects of the different functional groups and the layer number on the interfacial thermal resistance are also elaborated using the vibrational density of states of the graphene and the paraffin matrix. The present findings provide useful guidelines in the application of functionalised graphene for practical thermal management.Comment: 8 figure

The phase of iron catalyst nanoparticles during carbon nanotube growth

We study the Fe-catalyzed chemical vapor deposition of carbon nanotubes by complementary in situ grazing-incidence X-ray diffraction, in situ X-ray reflectivity, and environmental transmission electron microscopy. We find that typical oxide supported Fe catalyst films form widely varying mixtures of bcc and fcc phased Fe nanoparticles upon reduction, which we ascribe to variations in minor commonly present carbon contamination levels. Depending on the as-formed phase composition, different growth modes occur upon hydrocarbon exposure: For γ-rich Fe nanoparticle distributions, metallic Fe is the active catalyst phase, implying that carbide formation is not a prerequisite for nanotube growth. For α-rich catalyst mixtures, Fe3C formation more readily occurs and constitutes part of the nanotube growth process. We propose that this behavior can be rationalized in terms of kinetically accessible pathways, which we discuss in the context of the bulk iron–carbon phase diagram with the inclusion of phase equilibrium lines for metastable Fe3C. Our results indicate that kinetic effects dominate the complex catalyst phase evolution during realistic CNT growth recipes.S.H. acknowledges funding from ERC grant InsituNANO (No. 279342). We acknowledge the European Synchrotron Radiation Facility (ESRF) for provision of synchrotron radiation facilities. We acknowledge the use of facilities within the LeRoy Eyring Center for Solid State Science at Arizona State University. C.T.W. and C.S.E. acknowledge funding from the EC project Technotubes. A.D.G. acknowledges funding from the Marshall Aid Commemoration Commission and the National Science Foundation. R.S.W. acknowledges funding from EPSRC (Doctoral training award) and B.C.B. acknowledges a Research Fellowship at Hughes Hall, Cambridge.This is the accepted manuscript. The final version is available from ACS at http://pubs.acs.org/doi/abs/10.1021/cm301402g

Development of ClearPEM-Sonic, a multimodal mammography system for PET and Ultrasound

International audience; ClearPEM-Sonic is an innovative imaging device specifically developed for breast cancer. The possibility to work in PEM-Ultrasound multimodality allows to obtain metabolic and morphological information increasing the specificity of the exam. The ClearPEM detector is developed to maximize the sensitivity and the spatial resolution as compared to Whole-Body PET scanners. It is coupled with a 3D ultrasound system, the SuperSonic Imagine Aixplorer that improves the specificity of the exam by providing a tissue elasticity map. This work describes the ClearPEM-Sonic project focusing on the technological developments it has required, the technical merits (and limits) and the first multimodal images acquired on a dedicated phantom. It finally presents selected clinical case studies that confirm the value of PEM information