Determination of the laser-induced damage threshold of polymer optical fibers

Investigating the properties of manufactured polymer optical fibers is essential to determine proper areas of application. Using pulsed laser radiation, especially with respect to laser activity in optical fibers, the maximum acceptable transmittable energy without inducing damage is of particular interest. Therefore, this work is related to laser-induced damage in polymer optical fibers at a wavelength of 532 nm and a pulse duration of 7.3 ns. In particular, the influence of the coupling condition on the transmittable pulse energy and the damage behavior applying an R-on-1 test procedure are analyzed in this study. The obtained results give information about the long-Term behavior and will be used to optimize the manufacturing process. © COPYRIGHT SPI

Shallow-Water Coral Reefs in Transition: Examples from Belize and The Bahamas

Reprinted from: Ronald D. Lewis and Bruce C. Panuska (eds.) Proceedings of the 11th Symposium on the Geology of the Bahamas and Other Carbonate Regions: San Salvador, Gerace Research Cente

Stereotactic MRI-guided radiation therapy for localized prostate cancer (SMILE): a prospective, multicentric phase-II-trial

BACKGROUND Normofractionated radiation regimes for definitive prostate cancer treatment usually extend over 7-8 weeks. Recently, moderate hypofractionation with doses per fraction between 2.2 and 4 Gy has been shown to be safe and feasible with oncologic non-inferiority compared to normofractionation. Radiobiologic considerations lead to the assumption that prostate cancer might benefit in particular from hypofractionation in terms of tumor control and toxicity. First data related to ultrahypofractionation demonstrate that the overall treatment time can be reduced to 5-7 fractions with single doses > 6 Gy safely, even with simultaneous focal boosting of macroscopic tumor(s). With MR-guided linear accelerators (MR-linacs) entering clinical routine, invasive fiducial implantations become unnecessary. The aim of the multicentric SMILE study is to evaluate the use of MRI-guided stereotactic radiotherapy for localized prostate cancer in 5 fractions regarding safety and feasibility. METHODS The study is designed as a prospective, one-armed, two-stage, multi-center phase-II-trial with 68 patients planned. Low- and intermediate-risk localized prostate cancer patients will be eligible for the study as well as early high-risk patients (cT3a and/or Gleason Score ≤ 8 and/or PSA ≤ 20 ng/ml) according to d'Amico. All patients will receive definitive MRI-guided stereotactic radiation therapy with a total dose of 37.5 Gy in 5 fractions (single dose 7.5 Gy) on alternating days. A focal simultaneous integrated boost to MRI-defined tumor(s) up to 40 Gy can optionally be applied. The primary composite endpoint includes the assessment of urogenital or gastrointestinal toxicity ≥ grade 2 or treatment-related discontinuation of therapy. The use of MRI-guided radiotherapy enables online plan adaptation and intrafractional gating to ensure optimal target volume coverage and protection of organs at risk. DISCUSSION With moderate hypofractionation being the standard in definitive radiation therapy for localized prostate cancer at many institutions, ultrahypofractionation could be the next step towards reducing treatment time without compromising oncologic outcomes and toxicities. MRI-guided radiotherapy could qualify as an advantageous tool as no invasive procedures have to precede in therapeutic workflows. Furthermore, MRI guidance combined with gating and plan adaptation might be essential in order to increase treatment effectivity and reduce toxicity at the same time

Laser-induced degradation and damage morphology in polymer optical fibers

The radiation of pulsed laser systems can generate changes in various materials. On the one hand, these modifications can be used for a variety of applications i.e. laser welding, cutting and many more [1]. The precision and quality depends on the material and laser parameters. On the other hand, material changes are not always desired in other applications. When using optical materials such as optical fibers as a light guide or as a sensor, laser-induced damage effects inside the fiber are to be prevented to ensure constant light guidance and the reliable monitoring of a desired parameter. Therefore, investigations for quality assurance need to be performed. For this reason, this work investigates laserinduced damage in polymer optical fibers (POF) using a nanosecond pulsed laser system at a wavelength of 532 nm. The impact of different laser and fiber parameters on the long-term degradation behavior is observed. In addition, the overall degradation behavior as well as the knowledge gained by analyzing the damage morphology and distribution will be used to obtain a better understanding of the damage mechanisms

First measurement of the Non-instantaneous response Time of a χ(3) nonlinear optical effect

The third harmonic of a few-cycle pulse, generated at different dielectric surfaces, is investigated using interferometric frequency-resolved optical gating. We present direct experimental evidence for a non-instantaneous nonlinear response in a TiO2 thin film whereas surface third-harmonic generation in a SiO2 sample does not show any indication for non-instanteneity. To the best of our knowledge, this constitutes the first report of a non-instantaneous nonlinear optical response of a dielectric optical material

Evidence of the Existence of a High Spin Low Spin Equilibrium in Liver Microsomal Cytochrome P450, and its Role in the Enzymatic Mechanism

In rabbit liver microsomal cytochrome P450 a high spin (S = = 5/2) low spin (S = 1/2) equilibrium has been proved to exist by recording temperature difference spectra in the Soret and in the visible region of the absorption spectrum of solubilized cytochrome P450. In the presence of type II substrates the predominantly low spin state of cytochrome P450 is maintained, only a very small shift to lower spin is observed. Ligands of the heme iron, such as cyanide and imidazole, pr9duce a pure low spin state and therefore in the presence of these ligands no temperature difference spectra can be obtained. In the presence of type I substrate, however, the spin equilibrium is shifted to the high spin state. The extent of this shift (1) depends on specific properties of the substrate and (2) it is generally relatively small, up to about 80/o in the case of substrates investigated so far

Tracking of unpredictable moving stimuli by pigeons

Despite being observed throughout the animal kingdom, catching a moving object is a complex task and little is known about the mechanisms that underlie this behavior in non-human animals. Three experiments examined the role of prediction in capture of a moving object by pigeons. In Experiment 1, a stimulus moved in a linear trajectory, but sometimes made an unexpected 90o turn. The sudden turn had only a modest effect on capture and error location, and the analyses suggested that the birds had adjusted their tracking to the novel motion. In Experiment 2, the role of visual input during a turn was tested by inserting disappearances (either 1.5 cm or 4.5 cm) on both the straight and turn trials. The addition of the disappearance had little effect on capture success, but delayed capture location with the larger disappearance leading to greater delay. Error analyses indicated that the birds adapted to the post-turn, post-disappearance motion. Experiment 3 tested the role of visual input when the motion disappeared behind an occluder and emerged in either a straight line or at a 90o angle. The occluder produced a disruption in capture success but did not delay capture. Error analyses indicated that the birds did not adjust their tracking to the new motion on turn trials following occlusion. The combined results indicate that pigeons can anticipate the future position of a stimulus, and can adapt to sudden, unpredictable changes in motion but do so better after a disappearance than after an occlusion

Dynamic liquefaction of shear zones in intact loess during simulated earthquake loading

The 2010-2011 Canterbury earthquake sequence in New Zealand exposed loess-mantled slopes in the area to very high levels of seismic excitation (locally measured as >2 g). Few loess slopes showed permanent local downslope deformation, and most of these showed only limited accumulated displacement. A series of innovative dynamic back pressured shear-box tests were undertaken on intact and remoulded loess samples collected from one of the recently active slopes replicating field conditions under different simplified horizontal seismic excitations. During each test, the strength reduction and excess pore water pressures generated were measured as the sample failed. Test results suggest that although dynamic liquefaction could have occurred, a key factor was likely to have been that the loess was largely unsaturated at the times of the large earthquake events. The failure of intact loess samples in the tests was complex and variable due to the highly variable geotechnical characteristics of the material. Some loess samples failed rapidly as a result of dynamic liquefaction as seismic excitation generated an increase in pore-water pressure, triggering rapid loss of strength and thus of shear resistance. Following initial failure, pore pressure dissipated with continued seismic excitation and the sample consolidated, resulting in partial shear-strength recovery. Once excess pore-water pressures had dissipated, deformation continued in a critical effective stress state with no further change in volume. Remoulded and weaker samples, however, did not liquefy, and instead immediately reduced in volume with an accompanying slower and more sustained increase in pore pressure as the sample consolidated. Thereafter excess pressures dissipated and deformation continued at a critical state. The complex behaviour explained why, despite exceptionally strong ground shaking, there was only limited displacement and lack of run-out: dynamic liquefaction was unlikely to occur in the freely draining slopes. Dynamic liquefaction however remained a plausible mechanism to explain loess failure in some of the low-angle toe slopes, where a permanent water table was present in the loess