Reactive Sintering of Bimodal WC-Co Hardmetals

Bimodal WC-Co hardmetals were produced using novel technology - reactive sintering. Milled and activated tungsten and graphite powders were mixed with commercial coarse grained WC-Co powder and then sintered. The microstructure of produced materials was free of defects and consisted of evenly distributed coarse and fine tungsten carbide grains in cobalt binder. The microstructure, hardness and fracture toughness of reactive sintered bimodal WC-Co hardmetals is exhibited. Developed bimodal hardmetal has perspective for demanding wear applications for its increased combined hardness and toughness. Compared to coarse material there is only slight decrease in fracture toughness (K1c is 14.7 for coarse grained and 14.4 for bimodal), hardness is increased from 1290 to 1350 HV units.DOI: http://dx.doi.org/10.5755/j01.ms.21.3.7511</p

The Influence of Cr3C2 and VC as Alloying Additives on the Microstructure and Properties of Reactive Sintered WC-Co Cermets

Investigated WC-Co cermets were produced via reactive sintering. In case of reactive sintering the elemental powders of tungsten, carbon black as graphite source and cobalt at first activated throw high energy milling and then the carbide synthesis is taking place in the same cycle with liquid phase sintering of the cermets. Because there is a lack of information about the influence of alloying additives on the reactive sintered WC-Co cermets, small amount of chromium carbide or vanadium carbide was added to the powders. To investigate the influence of carbon content in initial powder mixture on the microstructure and properties of reactive sintered WC-Co cermets alloyed with Cr3C2 and VC cermets with different carbon content were produced. The hardness, transverse rupture strength and erosion resistance of alloyed WC-Co cermets depending on carbon content in initial powder mixture is exhibited.DOI: http://dx.doi.org/10.5755/j01.ms.18.1.1347</p