Effect of Back Care Program in Preventing Back injuries among Nursing students.

Musculoskeletal disorders include a wide range of inflammatory and degenerative conditions affecting the muscles, tendons, ligaments, joints, peripheral nerves and supporting blood vessels. These include clinical syndromes such as tendon inflammations and related conditions (tenosynovitis, epicondylitis, bursitis), nerve compression disorders (carpal tunnel syndromes, sciatica) and osteoarthorois, as well as less well standradised conditions such as myalgia, low back pain and other regional pain syndromes. Body regions most commonly involved are the low back, neck, shoulder, forearm and hand. Nevertheless, musculoskeletal disorders are the single largest category of work related illness. This study conducted in an effort to find out the effect of back care program in reducing the incidence of back pain among nursing students. The study included 40 nursing students who have regular clinical postings. This study was a pre and post test experimental study design. The results were analysed using paired t test. The results showed a significant reduction in the occurrence of back pain. From this study, it is concluded that the back care program given to the nursing students significantly reduced the occurrence of back injury and thereby reducing incidence of back pain. So it is also recommended to add back care programme in nursing programme of all level. It is also recommended to have frequent classes on back care with debriefing to ensure all nurses attending the back care programme understand the biomechanics of doing their job safely and with atmost energy conservation. It is also recommended to stick bills and circulate pamphlets on en back care to nurses and special information can be given in regard to the firm where they work

Controlling Covalency and Anion Redox Potentials through Anion Substitution in Li-Rich Chalcogenides

Development of next-generation battery technologies is imperative in the pursuit of a clean energy future. Toward that end, battery chemistries capable of multielectron redox processes are at the forefront of studies on Li-based systems to increase the gravimetric capacity of the cathode. Multielectron processes rely either on the iterative redox of transition metal cations or redox involving both the transition metal cations and the anionic framework. Targeting coupled cation and anion redox to achieve multielectron charge storage is difficult, however, because the structure–property relationships that govern reversibility are poorly understood. In an effort to develop fundamental understanding of anion redox, we have developed a materials family that displays tunable anion redox over a range of potentials that are dependent on a systematic modification of the stoichiometry. We report anion redox in the chalcogenide solid solution Li₂FeS_(2–y)Se_y, wherein the mixing of the sulfide and selenide anions yields a controllable shift in the high voltage oxidation plateau. Electrochemical measurements indicate that reversible multielectron redox occurs across the solid solution. X-ray absorption spectroscopy supports the oxidation of both iron and selenium at high states of charge, while Raman spectroscopy indicates the formation of Se–Se dimers in Li₂FeSe₂ upon Li deintercalation, providing insight into the charge mechanism of the Li-rich iron chalcogenides. Anion substitution presents direct control over the functional properties of multielectron redox materials for next generation battery technologies

Dihexyl-Substituted Poly(3,4-Propylenedioxythiophene) as a Dual Ionic and Electronic Conductive Cathode Binder for Lithium-Ion Batteries

The polymer binders used in most lithium-ion batteries (LIBs) serve only a structural role, but there are exciting opportunities to increase performance by using polymers with combined electronic and ionic conductivity. To this end, here we examine dihexyl-substituted poly(3,4-propylenedioxythiophene) (PProDOT-Hx₂) as an electrochemically stable π-conjugated polymer that becomes electrically conductive (up to 0.1 S cm⁻¹) upon electrochemical doping in the potential range of 3.2 to 4.5 V (vs Li/Li⁺). Because this family of polymers is easy to functionalize, can be effectively fabricated into electrodes, and shows mixed electronic and ionic conductivity, PProDOT-Hx₂ shows promise for replacing the insulating polyvinylidene fluoride (PVDF) commonly used in commercial LIBs. A combined experimental and theoretical study is presented here to establish the fundamental mixed ionic and electronic conductivity of PProDOT-Hx₂. Electrochemical kinetics and electron spin resonance are first used to verify that the polymer can be readily electrochemically doped and is chemically stable in a potential range of interest for most cathode materials. A novel impedance method is then used to directly follow the evolution of both the electronic and ionic conductivity as a function of potential. Both values increase with electrochemical doping and stay high across the potential range of interest. A combination of optical ellipsometry and grazing incidence wide angle X-ray scattering is used to characterize both solvent swelling and structural changes that occur during electrochemical doping. These experimental results are used to calibrate molecular dynamics simulations, which show improved ionic conductivity upon solvent swelling. Simulations further attribute the improved ionic conductivity of PProDOT-Hx₂ to its open morphology and the increased solvation is possible because of the oxygen-containing propylenedioxythiophene backbone. Finally, the performance of PProDOT-Hx₂ as a conductive binder for the well-known cathode LiNi_(0.8)Co_(0.15)Al_(0.05)O₂ relative to PVDF is presented. PProDOT-Hx₂-based cells display a fivefold increase in capacity at high rates of discharge compared to PVDF-based electrodes at high rates and also show improved long-term cycling stability. The increased rate capability and cycling stability demonstrate the benefits of using binders such as PProDOT-Hx₂, which show good electronic and ionic conductivity, combined with electrochemical stability over the potential range for standard cathode operation

Convalescent plasma in patients admitted to hospital with COVID-19 (RECOVERY): a randomised controlled, open-label, platform trial

SummaryBackground Azithromycin has been proposed as a treatment for COVID-19 on the basis of its immunomodulatoryactions. We aimed to evaluate the safety and efficacy of azithromycin in patients admitted to hospital with COVID-19.Methods In this randomised, controlled, open-label, adaptive platform trial (Randomised Evaluation of COVID-19Therapy [RECOVERY]), several possible treatments were compared with usual care in patients admitted to hospitalwith COVID-19 in the UK. The trial is underway at 176 hospitals in the UK. Eligible and consenting patients wererandomly allocated to either usual standard of care alone or usual standard of care plus azithromycin 500 mg once perday by mouth or intravenously for 10 days or until discharge (or allocation to one of the other RECOVERY treatmentgroups). Patients were assigned via web-based simple (unstratified) randomisation with allocation concealment andwere twice as likely to be randomly assigned to usual care than to any of the active treatment groups. Participants andlocal study staff were not masked to the allocated treatment, but all others involved in the trial were masked to theoutcome data during the trial. The primary outcome was 28-day all-cause mortality, assessed in the intention-to-treatpopulation. The trial is registered with ISRCTN, 50189673, and ClinicalTrials.gov, NCT04381936.Findings Between April 7 and Nov 27, 2020, of 16 442 patients enrolled in the RECOVERY trial, 9433 (57%) wereeligible and 7763 were included in the assessment of azithromycin. The mean age of these study participants was65·3 years (SD 15·7) and approximately a third were women (2944 [38%] of 7763). 2582 patients were randomlyallocated to receive azithromycin and 5181 patients were randomly allocated to usual care alone. Overall,561 (22%) patients allocated to azithromycin and 1162 (22%) patients allocated to usual care died within 28 days(rate ratio 0·97, 95% CI 0·87–1·07; p=0·50). No significant difference was seen in duration of hospital stay (median10 days [IQR 5 to >28] vs 11 days [5 to >28]) or the proportion of patients discharged from hospital alive within 28 days(rate ratio 1·04, 95% CI 0·98–1·10; p=0·19). Among those not on invasive mechanical ventilation at baseline, nosignificant difference was seen in the proportion meeting the composite endpoint of invasive mechanical ventilationor death (risk ratio 0·95, 95% CI 0·87–1·03; p=0·24).Interpretation In patients admitted to hospital with COVID-19, azithromycin did not improve survival or otherprespecified clinical outcomes. Azithromycin use in patients admitted to hospital with COVID-19 should be restrictedto patients in whom there is a clear antimicrobial indication

Ir-phosphate cocatalyst for photoelectrochemical water oxidation using alpha-Fe2O3

alpha-Fe2O3 is an ideal photoanode for solar water oxidation owing to its visible light absorbing capability, suitable valence band position, low cost, high abundance, non-toxicity and eco-friendliness. However, the reported efficiencies are very low due to the poor kinetics of water oxidation by photogenerated holes on alpha-Fe2O3. In the present study, an alpha-Fe2O3 electrode is obtained by heating a film of Fe which is prepared by the electrochemical reduction of Fe2+ ions. Film thickness and calcination temperature are carefully optimized to get a maximum photoresponse in neutral phosphate solution. In order to improve the water oxidation kinetics and reduce the charge carrier recombination, an iridium-phosphate (Ir-Pi) catalyst is electrodeposited on the surface of alpha-Fe2O3. Ir-Pi is found to reduce the OER onset potential by 350 mV, and enhances the photocurrent density by 3 times at 1.23 V vs. RHE

Electrochemical deposition of manganese oxide-phosphate-reduced graphene oxide composite and electrocatalysis of the oxygen evolution reaction

A composite of manganese oxide and reduced graphene oxide (rGO) is prepared in a single step electrochemical reduction process in a phosphate buffer solution for studying as an electrocatalyst for the oxygen evolution reaction (OER). The novel composite catalyst, namely, MnOx-Pi-rGO, is electrodeposited from a suspension of graphene oxide (GO) in a neutral phosphate buffer solution containing KMnO4. The manganese oxide incorporates phosphate ions and deposits on the rGO sheet, which in turn is formed on the substrate electrode by electrochemical reduction of GO in the suspension. The OER is studied with the MnOx-Pi-rGO catalyst in a neutral phosphate electrolyte by linear sweep voltammetry. The results indicate a positive influence of rGO in the catalyst. By varying the ratio of KMnO4 and GO in the deposition medium and performing linear sweep voltammetry for the OER, the optimum composition of the deposition medium is obtained as 20 mM KMnO4 + 6.5% GO in 0.1 M phosphate buffer solution of pH 7. Under identical conditions, the MnOx-Pi-rGO catalyst exhibits 6.2 mA cm(-2) OER current against 2.9 mA cm(-2) by MnOx-Pi catalyst at 2.05 V in neutral phosphate solution. The Tafel slopes measured for OER at MnOx-Pi and MnOx-Pi-rGO are similar in magnitude at about 0.180 V decade(-1). The high Tafel slopes are attributed to partial dissolution of the catalyst during oxygen evolution. The O-2 evolved at the catalyst is measured by the water displacement method and the positive role of rGO on catalytic activity of MnOx-Pi is demonstrated

Photochemical Deposition of Co-Ac Catalyst on ZnO Nanorods for Solar Water Oxidation

The preparation of ZnO nanorod films decorated with cobalt-acetate (CoAc) electrocatalyst and its activity for photoelectrolysis of water have been demonstrated. The photochemically prepared CoAc catalyst is chemically and morphologically similar to the electrochemically prepared CoAc catalyst. The on-set potential of oxygen evolution reaction is lower on CoAc-ZnO photoanode in relation to bare ZnO photoanode. There is a three to four fold increase in photooxidation current of OER due to the presence of CoAc co-catalyst on ZnO. Thus, the photochemically prepared CoAc on ZnO is an alternative and efficient co-catalyst for photoelectrochemical oxygen evolution reaction. The enhancement in photocatalytic activity of ZnO by the CoAc catalyst photochemically deposited from acetate buffer solution is significantly greater than the cobalt-phosphate (CoPi) co-catalyst deposited from phosphate buffer solution. (C) The Author(s) 2015. Published by ECS. All rights reserved

An oxygen evolution Co-Ac catalyst - the synergistic effect of phosphate ions

Formation of an amorphous cobalt based oxygen evolution catalyst called Co-Pi has been recently reported from a neutral phosphate buffer solution containing Co2+. But the concentration of Co2+ is as low as 0.5 mM due to poor solubility of a cobalt salt in phosphate medium. In the present study, a cobalt acetate based oxygen evolution catalyst (Co-Ac) is prepared from a neutral acetate buffer solution, where the solubility of Co2+ is very high (>100 times in comparison with phosphate buffer solution). The Co-Ac possesses better catalytic activity than the Co-Pi with an additional advantage of easy bulk scale preparation. The comparative studies on the oxygen evolution reaction (OER) activity of Co-Ac and Co-Pi in phosphate and acetate buffer electrolytes reveal that the Co-Ac exhibits enhanced synergistic catalytic activity in phosphate solution, probably due to partial substitution of acetate in the catalyst layer by phosphate, resulting in the formation of a Co-Ac-Pi catalyst

Muslim-friendly tourism in Australia: challenges and prospects

In recent years, the Muslim travel market has been recognised as an untapped and promising segment by tourism destinations worldwide, including OIC (Organization of Islamic Cooperation) and non-OIC countries. As a result, these destinations have started to develop Muslim-friendly environments for visitors and have tailored their products and services to meet the interests and needs of Muslim travellers. Currently, there is a growing demand for Muslim-friendly tourism globally. Australia is one of the destinations that is demonstrating an interest in positioning itself as a Muslim-friendly destination. However, minimal research has been conducted in this area within Australia. Consequently, there is a lack of awareness among tourism stakeholders in Australia about the true potential of this rapidly growing segment. As a result, no established systems or guidelines are in place to promote this lucrative tourism sector. Therefore, the possibility of developing, managing, and positioning Australia as a Muslim-friendly tourism destination has not yet been explored. This paper examines the challenges and prospects of Muslim-friendly tourism in Australia and provides recommendations for developing this lucrative sector. A literature review and other document reviews were undertaken in this study