Synthesis of Oleoylethanolamide Using Lipase

An effective process for the enzymatic synthesis of oleoylethanolamide is described in this study. The process included purification of a commercial oleic acid product and then optimization of the reaction between the purified oleic acid and ethanolamine in the presence of hexane and a lipase. Under the optimal amidation reaction conditions identified, oleoylethanolamide was obtained with 96.6% purity. The synthesis was also conducted on a large scale (50 mmol of each of the reactants), and oleoylethanolamide purity and yield after crystallization purification were 96.1 and 73.5%, respectively. Compared to the previous studies, the current method of preparing high-purity oleoylethanolamide is more effective and economically feasible. The scalability and ease for such synthesis make it possible to study the biological and nutritional functions of the cannabinoid-like oleoylethanolamide in animal or human subjects

Employment of hyper-cycloidal oscillatory motion for finding the coefficient of rolling friction. Part 2: Experimental investigation

Abstract The paper presents a method for finding the characteristics of rolling friction between two cylindrical external surfaces. By choosing the motion between two parallel cylinders it results that a point from one of the cylinders describes a hyper-cycloidal curve when rolling over the other cylinder. The study is focused on the friction in ball bearings. Parts of the ball bearings to be studied are directly involved in materializing the hyper-cycloidal contact. Thus, the immobile circles are materialized by the outer surface of the external ring and the mobile circles are materialized by the spherical surfaces of the balls. The motion of a laser stick attached to the pendulum is filmed. Analyzing the movie, the numerical time dependence of angular amplitude decrease is obtained. The concordance between the experimental and theoretical angular amplitude damping directs to the value of coefficient of rolling friction.</jats:p

Orientation Behavior of Retinal Photoreceptors in Alternating Electric Fields

AbstractIn alternating electric (AC) fields, particles experience polarizing effects that induce dipoles that orient elongated specimens either parallel or perpendicular to the field lines. In this work we studied the behavior of photoreceptor cells’ rod outer segments (ROS) in AC fields of different frequencies. We showed that at low frequencies, ROS orient parallel to the field, whereas at higher frequencies they orient perpendicular to the field lines (in the frequency range from 100Hz to 10MHz). We found this behavior to be dependent on the physiological state of cells (due to modifications in their electrical properties). To simulate cell damage, the membrane conductivity was changed by treating the cell with gramicidin A, which resulted in a decrease of cytosol conductivity and, consequently, in a change of the orientation behavior of the treated cells. The change of cell orientation with cytosol conductivity is rather sharp, suggesting the potential of the method for accurate evaluation of the cell physiological status. We modeled the interaction between ROS and AC fields approximating the rod cell by a prolate spheroid with a very long axis. The internal compartment of the ellipsoid was considered to be filled with an inhomogeneous medium consisting of alternating layers of membrane and cytoplasm as media modeling the disks. This theoretical model proved to be in good agreement with the experimental results and enabled the derivation (by fitting with the experimental results) of the membrane and cytosol parameters for normal and damaged cells

Employment of hyper-cycloidal oscillatory motion for finding the coefficient of rolling friction. Part 1: Theoretical model

Abstract The oscillation motions of physical pendula constructed with contacts between ball and cylindrical external surfaces for materializing the theoretical frictionless pivot point were applied for determining the coefficient of rolling friction (occurring as a characteristic of the relative motion between the contacting surfaces). The condition imposed for estimation of the coefficient of rolling friction consists in the requirement that the theoretical curve and the experimental data describing the decrease of angular amplitude should superpose each other. To be mentioned that specialized software for dynamic analysis characterizes the rolling friction by the internal damping of the contacting materials instead of applying the coefficient of rolling friction between the materials.</jats:p

Separation of Acylglycerides Obtained by Enzymatic Esterification Using Solvent Extraction

New avenues to add value to glycerol are currently being explored. One of them is the synthesis of structured lipids through glycerol esterification. In this work we have analyzed the recovery and purification of dicaprin obtained by esterification of glycerol with capric acid (C) in heptane, mediated by Lipozyme RM IM. This is an intermediate step to obtain lipids MLM. In the first stage, the diglyceride synthesis MGM (being G a central HC–OH) was carried out. When M = C, the diglyceride is CGC. Recovery of the diglyceride CGC is required to carry out the esterification of the sn-2 position with palmitic acid (P), thus obtaining the triglyceride CPC. Different solvents were evaluated using Ecofac 1.0 (a molecular design software solvent) through a theoretical approach to explore the best solvents for the acylglycerides separation. Then, the performance of the selected solvents to separate dicaprin from mono and tricaprin was experimentally studied in a liquid–liquid extraction process. Previously, the remaining fatty acid had been neutralized. With liquid–liquid extraction in three simple steps, using ethanol/water, 94 % of the dicaprin obtained by enzymatic esterification was recovered with a purity of 89 % (wt%). It was also possible to obtain dicaprin with a purity of 97 % but with a yield of 56 %.Fil: Sanchez, Daniel Alberto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Bahía Blanca. Planta Piloto de Ingeniería Química (i); Argentina. Universidad Nacional del Sur; ArgentinaFil: Tonetto, Gabriela Marta. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Bahía Blanca. Planta Piloto de Ingeniería Química (i); Argentina. Universidad Nacional del Sur; ArgentinaFil: Ferreira, Maria Lujan. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Bahía Blanca. Planta Piloto de Ingeniería Química (i); Argentina. Universidad Nacional del Sur; Argentin