A study on RFID adoption for vehicle tracking in container terminal

Purpose: Numerous studies discuss that Radio Frequency Identification (RFID) technology can provide better container handling efficiency; however, relative lack of research concerns the tracking and monitoring the movement of vehicle in the container terminal environment. Thus, this study aims at discussing the feasibility of applying RFID for vehicle tracking purpose in a container terminal. Design/methodology/approach: This study makes use of a series of experiments in a container terminal to discuss the factors that affect the use of RFID in the terminal. The possibility and accuracy of using RFID in such challenging environment is also investigated. These propositions are investigated by a case study. Findings: The experimental results indicate that the RFID communication is good at the containers area which occupies nearly all the area in the container terminal. However, in other area such as sea side and free area, the performance is not good and 100% readability only achieved in 5m and 10m in free area and sea side respectively. Originality/value: The container terminal environment, which consists of different transport vehicles for onward transportation, will affect the performance of RFID readability. Poor setup of the RFID reader and tag will lower the feasibility of RFID adoption as well as increase the cost. In order to address the challenges of implementing RFID in the container terminal environment, this paper provides a series of real site testing experiments to study the RFID performance in the container terminal environment. This represents an original contribution of value to future research and practice in the RFID adoptions in container terminal environmentPeer Reviewe

Comparative transcriptomics of multidrug-resistant Acinetobacter baumannii in response to antibiotic treatments

Abstract Multidrug-resistant Acinetobacter baumannii, a major hospital-acquired pathogen, is a serious health threat and poses a great challenge to healthcare providers. Although there have been many genomic studies on the evolution and antibiotic resistance of this species, there have been very limited transcriptome studies on its responses to antibiotics. We conducted a comparative transcriptomic study on 12 strains with different growth rates and antibiotic resistance profiles, including 3 fast-growing pan-drug-resistant strains, under separate treatment with 3 antibiotics, namely amikacin, imipenem, and meropenem. We performed deep sequencing using a strand-specific RNA-sequencing protocol, and used de novo transcriptome assembly to analyze gene expression in the form of polycistronic transcripts. Our results indicated that genes associated with transposable elements generally showed higher levels of expression under antibiotic-treated conditions, and many of these transposon-associated genes have previously been linked to drug resistance. Using co-expressed transposon genes as markers, we further identified and experimentally validated two novel genes of which overexpression conferred significant increases in amikacin resistance. To the best of our knowledge, this study represents the first comparative transcriptomic analysis of multidrug-resistant A. baumannii under different antibiotic treatments, and revealed a new relationship between transposons and antibiotic resistance

VI-Band Follow-Up Observations of Ultra-Long-Period Cepheid Candidates in M31

The ultra-long period Cepheids (ULPCs) are classical Cepheids with pulsation periods exceeding $\approx 80$ days. The intrinsic brightness of ULPCs are ~1 to ~3 mag brighter than their shorter period counterparts. This makes them attractive in future distance scale work to derive distances beyond the limit set by the shorter period Cepheids. We have initiated a program to search for ULPCs in M31, using the single-band data taken from the Palomar Transient Factory, and identified eight possible candidates. In this work, we presented the VI-band follow-up observations of these eight candidates. Based on our VI-band light curves of these candidates and their locations in the color-magnitude diagram and the Period-Wesenheit diagram, we verify two candidates as being truly ULPCs. The six other candidates are most likely other kinds of long-period variables. With the two confirmed M31 ULPCs, we tested the applicability of ULPCs in distance scale work by deriving the distance modulus of M31. It was found to be $\mu_{M31,ULPC}=24.30\pm0.76$ mag. The large error in the derived distance modulus, together with the large intrinsic dispersion of the Period-Wesenheit (PW) relation and the small number of ULPCs in a given host galaxy, means that the question of the suitability of ULPCs as standard candles is still open. Further work is needed to enlarge the sample of calibrating ULPCs and reduce the intrinsic dispersion of the PW relation before re-considering ULPCs as suitable distance indicators.Comment: 13 pages, with 14 Figures and 4 Tables (one online table). AJ accepte

Asteroid Spin-Rate Study using the Intermediate Palomar Transient Factory

Two dedicated asteroid rotation-period surveys have been carried out using data taken on January 6-9 and February 20-23 of 2014 by the Intermediate Palomar Transient Factory (iPTF) in the $R$~band with $\sim 20$-min cadence. The total survey area covered 174~deg$^2$ in the ecliptic plane. Reliable rotation periods for 1,438 asteroids are obtained from a larger data set of 6,551 mostly main-belt asteroids, each with $\geq 10$~detections. Analysis of 1751, PTF based, reliable rotation periods clearly shows the "spin barrier" at $\sim 2$~hours for "rubble-pile" asteroids. We also found a new large-sized super-fast rotator, 2005 UW163 (Chang et al., 2014), and other five candidates as well. Our spin-rate distributions of asteroids with $3 < D < 15$~km shows number decrease when frequency greater than 5 rev/day, which is consistent to that of the Asteroid Light Curve Database (LCDB, Warner et al., 2009) and the result of (Masiero et al., 2009). We found the discrepancy in the spin-rate distribution between our result and (Pravec et al., 2008, update 2014-04-20) is mainly from asteroids with $\Delta m < 0.2$ mag that might be primarily due to different survey strategies. For asteroids with $D \leq 3$~km, we found a significant number drop at $f = 6$ rev/day. The YORP effect timescale for small-sized asteroid is shorter that makes more elongate objets spun up to reach their spin-rate limit and results in break-up. The K-S test suggests a possible difference in the spin-rate distributions of C- and S-type asteroids. We also find that C-type asteroids have a smaller spin-rate limit than the S-type, which agrees with the general sense that the C-type has lower bulk density than the S-type.Comment: Submitted to ApJ (Jan, 2015). Accepted by ApJ (June, 2015). The whole set of the folded lightcurves will be available on the published articl

313 new asteroid rotation periods from Palomar Transient Factory observations

A new asteroid rotation period survey have been carried out by using the Palomar Transient Factory (PTF). Twelve consecutive PTF fields, which covered an area of 87 deg$^2$ in the ecliptic plane, were observed in $R$ band with a cadence of $\sim$20 min during February 15--18, 2013. We detected 2500 known asteroids with a diameter range of 0.5 km $\leq D \leq$ 200 km. Of these, 313 objects had highly reliable rotation periods and exhibited the "spin barrier" at $\sim2$ hours. In contrast to the flat spin rate distribution of the asteroids with 3 km $\leq D \leq$ 15 km shown by Pravec et al. (2008), our results deviated somewhat from a Maxwellian distribution and showed a decrease at the spin rate greater than 5 rev/day. One super-fast-rotator candidate and two possible binary asteroids were also found in this work.Comment: 18 pages, 20 figures and 2 very long table

The Palomar Transient Factory and RR Lyrae: The Metallicity–Light Curve Relation Based on ab-type RR Lyrae in the Kepler Field

The wide-field synoptic sky surveys, known as the Palomar Transient Factory (PTF) and the intermediate Palomar Transient Factory (iPTF), will accumulate a large number of known and new RR Lyrae. These RR Lyrae are good tracers to study the substructure of the Galactic halo if their distance, metallicity, and galactocentric velocity can be measured. Candidates of halo RR Lyrae can be identified from their distance and metallicity before requesting spectroscopic observations for confirmation. This is because both quantities can be obtained via their photometric light curves, because the absolute V-band magnitude for RR Lyrae is correlated with metallicity, and the metallicity can be estimated using a metallicity–light curve relation. To fully utilize the PTF and iPTF light-curve data in related future work, it is necessary to derive the metallicity–light curve relation in the native PTF/iPTF R-band photometric system. In this work, we derived such a relation using the known ab-type RR Lyrae located in the Kepler field, and it is found to be [Fe/H]_(PTF) = -4.089-7.346P + 1.280φ_(31) (where P is pulsational period and φ_(31) is one of the Fourier parameters describing the shape of the light curve), with a dispersion of 0.118 dex. We tested our metallicity–light curve relation with new spectroscopic observations of a few RR Lyrae in the Kepler field, as well as several data sets available in the literature. Our tests demonstrated that the derived metallicity–light curve relation could be used to estimate metallicities for the majority of the RR Lyrae, which are in agreement with the published values

The Palomar Transient Factory and RR Lyrae: The Metallicity–Light Curve Relation Based on ab-type RR Lyrae in the Kepler Field

The wide-field synoptic sky surveys, known as the Palomar Transient Factory (PTF) and the intermediate Palomar Transient Factory (iPTF), will accumulate a large number of known and new RR Lyrae. These RR Lyrae are good tracers to study the substructure of the Galactic halo if their distance, metallicity, and galactocentric velocity can be measured. Candidates of halo RR Lyrae can be identified from their distance and metallicity before requesting spectroscopic observations for confirmation. This is because both quantities can be obtained via their photometric light curves, because the absolute V-band magnitude for RR Lyrae is correlated with metallicity, and the metallicity can be estimated using a metallicity–light curve relation. To fully utilize the PTF and iPTF light-curve data in related future work, it is necessary to derive the metallicity–light curve relation in the native PTF/iPTF R-band photometric system. In this work, we derived such a relation using the known ab-type RR Lyrae located in the Kepler field, and it is found to be [Fe/H]_(PTF) = -4.089-7.346P + 1.280φ_(31) (where P is pulsational period and φ_(31) is one of the Fourier parameters describing the shape of the light curve), with a dispersion of 0.118 dex. We tested our metallicity–light curve relation with new spectroscopic observations of a few RR Lyrae in the Kepler field, as well as several data sets available in the literature. Our tests demonstrated that the derived metallicity–light curve relation could be used to estimate metallicities for the majority of the RR Lyrae, which are in agreement with the published values

Towards Efficient Detection of Small Near-Earth Asteroids Using the Zwicky Transient Facility (ZTF)

We describe ZStreak, a semi-real-time pipeline specialized in detecting small, fast-moving near-Earth asteroids (NEAs) that is currently operating on the data from the newly-commissioned Zwicky Transient Facility (ZTF) survey. Based on a prototype originally developed by Waszczak et al. (2017) for the Palomar Transient Factory (PTF), the predecessor of ZTF, ZStreak features an improved machine-learning model that can cope with the $10\times$ data rate increment between PTF and ZTF. Since its first discovery on 2018 February 5 (2018 CL), ZTF/ZStreak has discovered $45$ confirmed new NEAs over a total of 232 observable nights until 2018 December 31. Most of the discoveries are small NEAs, with diameters less than $\sim100$ m. By analyzing the discovery circumstances, we find that objects having the first to last detection time interval under 2 hr are at risk of being lost. We will further improve real-time follow-up capabilities, and work on suppressing false positives using deep learning.Comment: PASP in pres

Multichannel Surface Discharge Switches

High pressure surface discharge switches have become the subject of applied research in recent years due to their important application in pulse power systems. The purpose of this study is to gain a better understanding of the subject so that an optimum design of the switch may be achieved. The surface discharge phenomena is examined under single channel static breakdown condition to attempt to isolate individual processes involved. The multichannel switch developed by the NRC is tested with a resistive load assembly to determine the optimum operating conditions. The lifetime characteristic is also studied using a small experimental device. Finally, two models for the switch are developed to fit the observed data. ThesisMaster of Engineering (MEngr