4,636 research outputs found
Nanostructural Engineering of Steel
The concept of microstructural engineering of steels is well established and is the basis for a wide range of processes and products. Recently, though, there has been increasing emphasis in developing microstructures that have submicron length scales and also in understanding in far greater detail the structures and solute effects that are occurring at the nanoscale. In this review it is proposed that we are heading towards the situation where we are applying nanostructural engineering concepts in the development of new steels. A range of examples are given as well as a discussion of the potential impact of new processing routes. Clearly the future advances will be driven through improved characterization methods, such as atom probe tomography, in combination with advanced modeling
A study of the strengthening mechanism in the thermomechanically processed TRIP/TWIP steel
The strengthening mechanism responsible for the unique combination of ultimate tensile strength and elongation in a multiphase Fe-0.2C-1.5Mn-1.2Si-0.3Mo-0.6Al-0.02Nb (wt%) steel was studied. The microstructures with different volume fraction of polygonal fenite, bainite and retained austenite were simulated by controlled thermomechanical processing. The interupted tensile test was used to study the bainitic ferrite, retained austenite and polygonal ferrite behavior as a function of plastic strain. X-ray analysis was used to characterize the volume fraction and carbon content of retained austenite. TEM and heat-tinting were utilized to analyze the effect of bainitic fenite morphology on the strain induced transformation of retained austenite and retained austenite twinning as a function of strain in the bulk material. The study has shown that the austenite twinning mechanism is more preferable than the transformation induced plasticity mechanism during the early stages of deformation for a microstructure containing I5% polygonal ferrite, while the transformation induced plasticity effect is the main mechanism in when there is 50% of polygonal ferrite in the microstructure. The baillitic fenite morphology affects the deformation mode of retained austenite during straining. The polygonal fenite behavior during straining depends on dislocation substructure tonned due to the deformation and the additional mobile dislocations caused by the TRIP effect. TRIP and TWIP effects depend not only on the chemical and mechanical stability of retained austenite, but also on the interaction of the phases during straining.<br /
Six topics on inscribable polytopes
Inscribability of polytopes is a classic subject but also a lively research
area nowadays. We illustrate this with a selection of well-known results and
recent developments on six particular topics related to inscribable polytopes.
Along the way we collect a list of (new and old) open questions.Comment: 11 page
An investigation into the effects of solvent content on the image quality and stability of ink jet digital prints under varied storage conditions
Increasing numbers of galleries, museums and archives are including ink jet printed materials into their collections, and therefore displays. There is evidence that the instability of these prints is such that images can suffer deterioration in print quality or in extreme cases, a loss of information over an extended period of time. This is shorter than the period typically required for perceptible deterioration to occur in many other paper-based artworks. The image stability of prints is affected by a number of factors some of which have already been studied. However the role played by the ink solvent in the loss of image quality has yet to be explored. This paper will outline research being undertaken to investigate the effects of solvent content which may increase/promote the loss in image quality of the hard copy prints when stored or displayed under a range of temperature and humidity conditions
(Anti)Proton and Pion Source Sizes and Phase Space Densities in Heavy Ion Collisions
NA44 has measured mid-rapidity deuteron spectra from AA collisions at
sqrt{s}=18GeV/A at the CERN SPS. Combining these spectra with published proton,
antiproton and antideuteron data allows us to calculate, within a coalescence
framework, proton and antiproton source sizes and phase space densities. These
results are compared to pion source sizes and densities, pA results and to
lower energy (AGS) data. The antiproton source is larger than the proton source
at sqrt{s}=18GeV/A. The phase space densities of pions and protons are not
constant but grow with system size. Both pi+ and proton radii decrease with
transverse mass and increase with sqrt{s}. Pions and protons do not freeze-out
independently. The nature of their interaction changes as sqrt{s}, and the
pion/proton ratio increases.Comment: 4 pages, Latex 2.09, 3 eps figures. Changes for January 2001. The
proton source size is now calculated assuming a more realistic Hulthen,
rather than Gaussian, wavefunction. A new figure shows the effect of this
change which is important for small radii. A second new figure shows the
results of RQMD calculations of the proton source size and phase density.
Because of correlations between position and momentum coalesence does not
show the full proton source size. The paper has been streamlined and
readability improve
A Comparative Study of the Magnetization Process of Two-Dimensional Antiferromagnets
Plateaux in the magnetization curves of the square, triangular and hexagonal
lattice spin-1/2 XXZ antiferromagnet are investigated. One finds a zero
magnetization plateau (corresponding to a spin-gap) on the square and hexagonal
lattice with Ising-like anisotropies, and a plateau with one third of the
saturation magnetization on the triangular lattice which survives a small
amount of easy-plane anisotropy. Here we start with transfer matrix
computations for the Ising limit and continue with series in the XXZ-anisotropy
for plateau-boundaries using the groundstates of the Ising limit. The main
focus is then a numerical computation of the magnetization curves with
anisotropies in the vicinity of the isotropic situation. Finally, we discuss
the universality class associated to the asymptotic behaviour of the
magnetization curve close to saturation, as observed numerically in two and
higher dimensions.Comment: 21 pages plain TeX (with macro package included), 7 PostScript
figures included using psfig.st
Minimal surfaces and particles in 3-manifolds
We use minimal (or CMC) surfaces to describe 3-dimensional hyperbolic,
anti-de Sitter, de Sitter or Minkowski manifolds. We consider whether these
manifolds admit ``nice'' foliations and explicit metrics, and whether the space
of these metrics has a simple description in terms of Teichm\"uller theory. In
the hyperbolic settings both questions have positive answers for a certain
subset of the quasi-Fuchsian manifolds: those containing a closed surface with
principal curvatures at most 1. We show that this subset is parameterized by an
open domain of the cotangent bundle of Teichm\"uller space. These results are
extended to ``quasi-Fuchsian'' manifolds with conical singularities along
infinite lines, known in the physics literature as ``massive, spin-less
particles''.
Things work better for globally hyperbolic anti-de Sitter manifolds: the
parameterization by the cotangent of Teichm\"uller space works for all
manifolds. There is another description of this moduli space as the product two
copies of Teichm\"uller space due to Mess. Using the maximal surface
description, we propose a new parameterization by two copies of Teichm\"uller
space, alternative to that of Mess, and extend all the results to manifolds
with conical singularities along time-like lines. Similar results are obtained
for de Sitter or Minkowski manifolds.
Finally, for all four settings, we show that the symplectic form on the
moduli space of 3-manifolds that comes from parameterization by the cotangent
bundle of Teichm\"uller space is the same as the 3-dimensional gravity one.Comment: 53 pages, no figure. v2: typos corrected and refs adde
Review of rehabilitation and habilitation strategies for children and young people with homonymous visual field loss caused by cerebral vision impairment
Partial and homonymous visual field loss (HVFL) is a common consequence of post-chiasmatic injury to the primary visual pathway or injury to the primary visual cortex. Different approaches to rehabilitation have been reported for older adults with HVFL and there is evidence to support the use of compensatory training over other proposed therapies. We reviewed the literature to investigate the current state of the art of rehabilitation and habilitation strategies for children and young people with HVFL, and whether there is enough evidence to support the use of these strategies in the paediatric population. We have provided an overview of the existing literature on children and young people with HVFL, a brief overview of rehabilitation strategies for adults with HVFL, and evidence on whether these different interventions have been applied with children and young people effectively. We found that there have been very few studies to investigate these strategies with children and young people, and the quality of evidence is currently low. New research is required to evaluate which strategies are effective for children and young people with HVFL and whether new strategies need to be developed
GMP Cryopreservation of Large Volumes of Cells for Regenerative Medicine: Active Control of the Freezing Process.
Cryopreservation protocols are increasingly required in regenerative medicine applications but must deliver functional products at clinical scale and comply with Good Manufacturing Process (GMP). Whilst GMP cryopreservation is achievable on a small scale using a Stirling cryocooler-based controlled rate freezer (EF600), successful large scale GMP cryopreservation is more challenging due to heat transfer issues and control of ice nucleation, both complex events which impact on success. We have developed a large scale cryocooler based CRF (VIA Freeze) which can process larger volumes and have evaluated it using alginate encapsulated liver cell (HepG2) spheroids (ELS). It is anticipated that ELS will comprise the cellular component of a bioartificial liver and will be required in volumes of approximately 2L for clinical use. Sample temperatures and Stirling cryocoolerpower consumption were recorded throughout cooling runs for both small (500ul) and large (200ml) volume samples. ELS recoveries were assessed using viability (FDA/PI staining with image analysis), cell number (nuclei count) and function (protein secretion), along with cryo-SEM and freeze substitution techniques to identify possible injury mechanisms. Slow cooling profiles were successfully applied to samples in both the EF600 and the VIA Freeze, and a number of cooling and warming profiles were evaluated. An optimised cooling protocolwith a non-linear cooling profile from ice nucleation to -60ºCwas implemented in both the EF600 and VIA Freeze. In the VIA Freeze the nucleation of ice is detected by the control software, allowing both non-invasive detection of the nucleation event for quality control (QC) purposes and the potential to modify the cooling profile following ice nucleation in an active manner. When processing 200ml of ELS in the VIA Freeze - viabilities at 93.4+/-7.4%, viable cell numbers at 14.3+/-1.7 million nuclei/ml alginate and protein secretion at 10.5+/-1.7 ug/ml/24h were obtained which, compared well with control ELS (viability - 98.1+/- 0.9%; viable cell numbers - 18.3+/-1.0 million nuclei/ml alginate, protein secretion- 18.7+/-1.8 ug/ml/24h). Large volume GMP cryopreservation of ELS is possible with good functional recovery using the VIA Freeze and may also be applied to other regenerative medicine applications
- …