The Effect of Fractal Contact Lenses on Peripheral Refraction in Myopic Model Eyes

Purpose: To test multizone contact lenses in model eyes: Fractal Contact Lenses (FCLs), designed to induce myopic peripheral refractive error (PRE). Methods: Zemax ray-tracing software was employed to simulate myopic and accommodation-dependent model eyes fitted with FCLs. PRE, defined in terms of mean sphere M and 90–180 astigmatism J180, was computed at different peripheral positions, ranging from 0 to 35 in steps of 5, and for different pupil diameters (PDs). Simulated visual performance and changes in the PRE were also analyzed for contact lens decentration and model eye accommodation. For comparison purposes, the same simulations were performed with another commercially available contact lens designed for the same intended use: the Dual Focus (DF). Results: PRE was greater with FCL than with DF when both designs were tested for a 3.5 mm PD, and with and without decentration of the lenses. However, PRE depended on PD with both multizone lenses, with a remarkable reduction of the myopic relative effect for a PD of 5.5 mm. The myopic PRE with contact lenses decreased as the myopic refractive error increased, but this could be compensated by increasing the power of treatment zones. A peripheral myopic shift was also induced by the FCLs in the accommodated model eye. In regard to visual performance, a myopia under-correction with reference to the circle of least confusion was obtained in all cases for a 5.5 mm PD. The ghost images, generated by treatment zones of FCL, were dimmer than the ones produced with DF lens of the same power. Conclusions: FCLs produce a peripheral myopic defocus without compromising central vision in photopic conditions. FCLs have several design parameters that can be varied to obtain optimum results: lens diameter, number of zones, addition and asphericity; resulting in a very promising customized lens for the treatment of myopia progression.This research was supported by the Ministerio de Economia y Competitividad (grant FIS2011-23175), the Generalitat Valenciana (grant PROMETEO2009-077) and the Universitat Politecnica de Valencia (grant INNOVA SP20120569), Spain.Rodríguez Vallejo, M.; Benlloch Fornés, JI.; Pons Martí, A.; Monsoriu Serra, JA.; Furlan, WD. (2014). The Effect of Fractal Contact Lenses on Peripheral Refraction in Myopic Model Eyes. Current Eye Research. 39(12):1-10. https://doi.org/10.3109/02713683.2014.903498S110391

The preparation of HEMA-MPC films for ocular drug delivery

There is a need to prolong drug residence time using a biocompatible formulation in the subconjunctival space after surgery to treat glaucoma. Drug releasing discs were prepared with 2-(hydroxyethyl)methacrylate (HEMA) and 2-methacryloyl-oxyethyl phosphorylcholine (MPC). The ratio of bound water (Wb) to free water (Wf) ratio increased from 1:0.3 to 1:6.8 with increasing MPC (0 to 50%, w/w). The optimal balance between water content, SR and mechanical strength were obtained with 10% MPC (w/w) hydrogels. Water-alcohol mixtures were examined to facilitate loading of poorly soluble drugs, and they showed greater hydrogel swelling than either water or alcohol alone. The SR was 1.2 ± 0.02 and 3.3 ± 0.1 for water and water:ethanol (1:1) respectively. HEMA-MPC (10%) discs were loaded with dexamethasone using either water:ethanol (1:1) or methanol alone. Drug release was examined in an outflow rig model that mimics the subconjunctival space in the eye. Dexamethasone loading increased from 0.3 to 1.9 mg/disc when the solvent was changed from water:ethanol (1:1) to methanol with the dexamethasone half-life (t½) increasing from 1.9 to 9.7 days respectively. These encouraging results indicate that HEMA-MPC hydrogels have the potential to sustain the residence time of a drug in the subconjunctival space of the eye

Erratum to: Thermal–mechanical behaviour of chitosan–cellulose derivative thermoreversible hydrogel films

CH, Chitosan; HPMC, (Hydroxypropyl)methyl cellulose; FT, Freeze-thaw; SC, Solvent casting; CH:HPMC (X:Y), pH Z, FT/SC, Chitosan and (hydroxypropyl)methyl cellulose hydrogel, at X and Y proportion (0-100), at Z pH (3.0-4.0) and prepared by freeze-thaw or solvent casting techniques; DSC, Differential scanning calorimetry; MDSC, Temperature modulated Differential scanning calorimetry; Tg, glass transition temperature; ΔH, enthalpy change; TGA, Thermogravimetric Analysis; TG, Thermogravimetry; DTG, Derivative or Differential thermogravimetry; σ, Tensile strength; ε, elongation at break; DMA, Dynamic mechanical analysis; X-Ray, X-radiation, FTIR-ATR, Attenuated total reflectance Fourier transform infrared spectroscopy; SEM, Scanning electron microscopy.The authors are thankful to the Chemistry and Physic Centres at Minho University (Pest-C/QUI/UI0686/2013 and PEST-C/FIS/UI607/2013), CNPq, FAPESP and CAPES for the financial support of this research. Sandra Cerqueira Barros and Carlos M. Costa acknowledge the Portuguese Foundation for Science and Technology for the Post-Doc and PhD grants provided (SFRH/BPD/85399/2012 and SFRH/BD/68499/2010) and M. M. Silva acknowledges to CNPq, for the mobility grant provided by this institution. The authors of this paper are grateful to the Company Devan-Micropolis, S.A., for the material support, namely the natural polymers chitosan (CH) and (hydroxypropyl)methyl cellulose (HPMC) employed in this study. JLGR acknowledges the support of Ministerio de Economía y Competitividad, MINECO, through the MAT2013-46467-C4-1-R project. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund