Experimental Study on Coordinated Heading Control of Four Vessels Moored Side by Side

A floating type liquefied natural gas (LNG) bunkering terminal has been under development in Korea since 2014; the terminal is designed to receive LNG from an LNG carrier (LNGC) and transfer it to two other LNG bunkering shuttles (LNGBS) simultaneously. The operational feasibility of the LNG loading and unloading processes has been confirmed. When four vessels are moored side by side with mooring ropes and fenders, their positions must be maintained within the designed allowable criteria. In addition, the floating bunkering terminal (FLBT) has its own mooring system, an internal turret with catenary mooring lines and stern tunnel thrusters to maintain its own position and control the vessel heading. In this study, we investigated the operational feasibility of the FLBT during the LNG loading and unloading operations with four vessel mooring configurations and heading controls. A series of model tests was done in the ocean engineering basin of the Korea Research Institute of Ships and Ocean engineering. The motion responses of the four vessels were determined using an optical measurement system, and the tensile loads on ship-to-ship mooring ropes and the compressive loads on ship-to-ship fenders were measured using one-axis load cells. A white noise test was done and the results were compared with the numerical results for the purpose of validation. Then, four combined environmental conditions were presented both without heading control and with several heading control cases. Finally, we determined the available safe bunkering heading ranges taking into account the tensile loads on the mooring ropes

Nicotiana benthamiana protein, NbPCIP1, interacting with Potato virus X coat protein plays a role as susceptible factor for viral infection

AbstractThe interactions of viral coat protein (CP) and host factors play an important role in viral replication and/or host defense mechanism. In this study, we constructed Nicotiana benthamiana cDNA library to find host factors interacting with Potato virus X (PVX) CP. Using yeast two-hybrid assay, we screened 3.3×106 independent yeast transformants from N. benthamiana cDNA library and identified six positive clones. One positive clone, named PVX CP-interacting protein 1 (NbPCIP1), is a plant-specific protein with homologue in N. tabacum (GenBank accession no. AB04049). We confirmed the PVX CP–NbPCIP1 interaction using yeast-two hybrid assay in yeast, protein–protein binding assay in vitro, and bimolecular fluorescent complementation assay in planta. Quantitative real-time RT-PCR analysis showed that the mRNA level of NbPCIP1 increased in PVX-infected N. benthamiana plants as compared to that of healthy plants. The green fluorescent protein (sGFP)-fused NbPCIP1 (NbPCIP1-sGFP) was localized in ER or ER-associated granular-like structure of cells. When we co-express NbPCIP1-sGFP and red fluorescent protein (RFP)-fused PVX CP (PVX CP-RFP), which were introduced by transiently expressing these proteins in N. benthamiana protoplasts and epidermal cells, however, we observed the co-localization of these proteins in the inclusion body-like complex in areas surrounding nucleus. Transient over-expression and transgene silencing of NbPCIP1 assay analysis indicated that NbPCIP1 plays a critical role in viral replication during PVX infection in host plant

Public support for health taxes and media regulation of harmful products in South Korea

Background Public health policy is inevitably associated with either a strong presence or lack of public support. We investigated factors associated with both the public support of and opposition to health taxes and the media regulation regarding advertising harmful products in Korea. Methods We interviewed 1200 respondents that were recruited using an equal-probability sampling method in accordance with the 2016 Korean census. Our investigation examined the extent of support and opposition towards health taxes and the media regulation of advertising that targets the consumption of tobacco, alcohol, and unhealthy foods according to socioeconomic characteristics, health habits, body mass index (BMI), and exposure to the advertising of harmful products. The study was conducted using a univariate and stepwise multivariate regression analysis. Results The majority (71.8%) of the respondents were supportive of imposing health taxes in general. Despite a high prevalence of tobacco and alcohol consumption among the respondents, they strongly supported media regulation of tobacco (72.3%), alcohol (63.7%), and eating broadcasts (51.9%) food advertising (44.0%). Those that were non-smokers, earned a high-income, were married, or had a child were likely to support at least one kind of regulation regarding alcohol and smoking related advertising. An exposure to excessive advertising of unhealthy products was associated with increase of respondents supporting the media regulation. Those who regarded the media as being influential seemed to be more supportive of health taxes or media regulation. Conclusion Our results indicated strong public support among the respondents for health taxes and the media regulation regarding the advertising of unhealthy products. Based on our data, we are optimistic that countries whose population show a high rate of tobacco, alcohol or unhealthy food consumption may launch public policy in addressing these factors.This study was supported by grants from Seoul National University, Seoul, Korea (grant number 80020160151). None of the funding organizations had any role in the design of the study, analysis, or interpretation of the data, or in the preparation, review, and approval of the manuscript

The discovery and characterization of tungsten insertase in tungsten cofactor biosynthesis

Please click Additional Files below to see the full abstract

Solid–liquid interface temperature measurement of evaporating droplet using thermoresponsive polymer aqueous solution

The present study aims to measure the solid–liquid interface temperature of an evaporating droplet on a heated surface using a thermoresponsive polymer. Poly(N-isopropylacrylamide) (pNIPAM) was used owing to its sensitive optical and mechanical properties to the temperature. We also measured the refractive index variation of the pNIPAM solution by using the surface plasmon resonance imaging (SPRi). In particular, the present study proposed a new method to measure the solid–liquid interface temperature using the correlation among reflectance, refractive index, and temperature. It was found that the reflectance of a pNIPAM solution decreased after the droplet deposition. The solid–liquid interface temperature, estimated from the reflectance, showed a lower value at the center of the droplet, and it gradually increased along the radial direction. The lowest temperature at the contact line region is present because of the maximum evaporative cooling. Moreover, the solid–liquid interface temperature deviation increased with the surface temperature, which means solid–liquid interface temperature should be considered at high temperature to predict the evaporation flux of the droplet accurately

Coal Pulverizer Prognostics Data Challenge in PHMAP 2017 and Suggestions for Future Studies

Pulverizers in a power plant are used to grind coal into the form of a fine powder for combustion in a power plant. To secure reliable operation, redundant pulverizers should be installed in power plants and monitored. Pulverizers can be operated and maintained in a cost-effective manner by correctly estimating the current health condition and remaining useful life of the pulverizer’s gearbox system. To this end, the Data Challenge Committee of the PHM Asian Pacific 2017 (PHMAP 2017) conference organized an open competition on the topic of coal pulverizer health estimation based on a real working power station. This paper presents the original problem and given facts, as well as the list of winners of the Data Challenge Competition. We anticipate that this paper can be used as a reference in the development of a prognostic method that can accurately predict the health conditions of coal pulverizers

Changes of the growth plate in children: 3-dimensional magnetic resonance imaging analysis

Purpose This pilot study assessed changes in the growth plate and growth rates in children during a 6-month period. Methods The study included 31 healthy children (17 boys, 14 girls) under evaluation for growth retardation. Height, weight, bone age, insulin like growth factor-1 (IGF-1), and insulin like growth factor binding protein 3 (IGF-BP3) were measured at baseline and after 6 months. In addition, the diameter, thickness, and volume of the femoral and tibial growth plates were measured using magnetic resonance imaging. Results The mean bone age in boys and girls was 11.7 and 10.7 years, respectively. In boys, height (z score) (-0.2 vs. 0.0), weight (z score) (0.8 vs. 1.1), body mass index (BMI) (z score) (1.27 vs. 1.5), IGF-1 (ng/mL) (343.6 vs. 501.8), and IGF-BP3 (ng/mL) (5,088.5 vs. 5,620.0) were significantly higher after 6 months. In girls, height (z score) (-1.0 vs. -0.7), weight (z score) (-0.5 vs. 0.1), BMI (z score) (-0.02 vs. 0.3), IGF-1 (ng/mL) (329.3 vs. 524.6), and IGF-BP3 (ng/mL) (4,644.4 vs. 5,593.6) were also significantly higher after 6 months. In both sexes, the mean diameter and volume of the femoral and tibial growth plates were significantly increased 6 months later. Conclusion No significant correlation was found between changes in the growth plate and clinical parameters in children with growth retardation in this study, other than correlations of change in femoral diameter with weight and BMI. A larger, long-term study is needed to precisely evaluate the correlation between change in the growth plate and growth