309 research outputs found
Numerical simulation of laminar separated flows on adaptive tri-tree grids with the finite volume method
In this work, a code has been developed that solves the Navier-Stokes equations using
the finite volume method with unstructured triangular grids. A cell-centred, finite
volume method is used and the pressure-velocity coupling is treated using both the
SMTLE and the MAC algorithms. The major advantage of using triangular grids is
their applicability to complex geometry. A special treatment is developed to ensure
good quality triangular elements around the boundaries. The numerical simulation of
incompressible flow at low Reynolds number is studied in this thesis.
A code for generating triangular grids using the tri-tree algorithm has been written and
an adaptive finite volume method developed for calculating laminar fluid flow. The
grid is locally adapted at each time step, with grid refinement and derefinement
dependent on the vorticity magnitude. The resulting grids have fine local resolution and
are economical in reducing the numerical simulation time.
The discretised equations are solved by using an iterative point by point Gauss-Seidel
solver. For calculating the values of velocity and pressure at vertices of triangular grids,
special interpolation schemes (averaged linear-interpolation and scattered interpolation)
are used to increase the accuracy. To avoid the well known checkerboard error
problems, i. e., the oscillations occurring in the pressure field, third derivative terms in
pressure, first introduced by Rhie-chow (1983), are added to the mass flux velocity.
Convective terms are approximated using a QUICK (Quadratic Upstream Interpolation
for Convective Kinematics) differencing scheme which has been developed here in for
unstructured grids.
Three cases of two-dimensional viscous incompressible fluid flow have been
investigated: the first is channel flow, in which the numerical results are compared with
the analytical solution; the second case is the backward-facing step flow; and the third
case is flow past circular cylinders at low Reynolds number (Re). The numerical results obtained for the last two cases are compared with published data. The evolution of
vortex shedding is presented for the case of unidirectional flow past a circular cylinder
at Re=200. In addition, drag and lift force coefficients are calculated and compared for
single and multiple cylinders in unidirectional flow
Observation of Two New N* Peaks in J/psi -> and Decays
The system in decays of is limited to be
isospin 1/2 by isospin conservation. This provides a big advantage in studying
compared with and experiments which mix
isospin 1/2 and 3/2 for the system. Using 58 million decays
collected with the Beijing Electron Positron Collider, more than 100 thousand
events are obtained. Besides two well known
peaks at 1500 MeV and 1670 MeV, there are two new, clear peaks in
the invariant mass spectrum around 1360 MeV and 2030 MeV. They are the
first direct observation of the peak and a long-sought "missing"
peak above 2 GeV in the invariant mass spectrum. A simple
Breit-Wigner fit gives the mass and width for the peak as MeV and MeV, and for the new peak above 2 GeV
as MeV and MeV, respectively
Partial Wave Analysis of
BES data on are presented. The
contribution peaks strongly near threshold. It is fitted with a
broad resonance with mass MeV, width MeV. A broad resonance peaking at 2020 MeV is also required
with width MeV. There is further evidence for a component
peaking at 2.55 GeV. The non- contribution is close to phase
space; it peaks at 2.6 GeV and is very different from .Comment: 15 pages, 6 figures, 1 table, Submitted to PL
Direct Measurements of the Branching Fractions for and and Determinations of the Form Factors and
The absolute branching fractions for the decays and
are determined using singly
tagged sample from the data collected around 3.773 GeV with the
BES-II detector at the BEPC. In the system recoiling against the singly tagged
meson, events for and events for decays are observed. Those yield
the absolute branching fractions to be and . The
vector form factors are determined to be
and . The ratio of the two form
factors is measured to be .Comment: 6 pages, 5 figure
Study of J/psi decays to Lambda Lambdabar and Sigma0 Sigma0bar
The branching ratios and Angular distributions for J/psi decays to Lambda
Lambdabar and Sigma0 Sigma0bar are measured using BESII 58 million J/psi.Comment: 11 pages, 5 figure
Measurements of J/psi Decays into 2(pi+pi-)eta and 3(pi+pi-)eta
Based on a sample of 5.8X 10^7 J/psi events taken with the BESII detector,
the branching fractions of J/psi--> 2(pi+pi-)eta and J/psi-->3(pi+pi-)eta are
measured for the first time to be (2.26+-0.08+-0.27)X10^{-3} and
(7.24+-0.96+-1.11)X10^{-4}, respectively.Comment: 11 pages, 6 figure
BESII Detector Simulation
A Monte Carlo program based on Geant3 has been developed for BESII detector
simulation. The organization of the program is outlined, and the digitization
procedure for simulating the response of various sub-detectors is described.
Comparisons with data show that the performance of the program is generally
satisfactory.Comment: 17 pages, 14 figures, uses elsart.cls, to be submitted to NIM
Measurement of branching fractions for the inclusive Cabibbo-favored ~K*0(892) and Cabibbo-suppressed K*0(892) decays of neutral and charged D mesons
The branching fractions for the inclusive Cabibbo-favored ~K*0 and
Cabibbo-suppressed K*0 decays of D mesons are measured based on a data sample
of 33 pb-1 collected at and around the center-of-mass energy of 3.773 GeV with
the BES-II detector at the BEPC collider. The branching fractions for the
decays D+(0) -> ~K*0(892)X and D0 -> K*0(892)X are determined to be BF(D0 ->
\~K*0X) = (8.7 +/- 4.0 +/- 1.2)%, BF(D+ -> ~K*0X) = (23.2 +/- 4.5 +/- 3.0)% and
BF(D0 -> K*0X) = (2.8 +/- 1.2 +/- 0.4)%. An upper limit on the branching
fraction at 90% C.L. for the decay D+ -> K*0(892)X is set to be BF(D+ -> K*0X)
< 6.6%
Measurements of the Mass and Full-Width of the Meson
In a sample of 58 million events collected with the BES II detector,
the process J/ is observed in five different decay
channels: , , (with ), (with
) and . From a combined fit of all five
channels, we determine the mass and full-width of to be
MeV/ and
MeV/.Comment: 9 pages, 2 figures and 4 table. Submitted to Phys. Lett.
- …