3,259 research outputs found
Group-delay measurement of frequency-converting devices using a comb generator
We propose a new method for the measurement of (group) delay from the radio-frequency (RF) input to the intermediate-frequency (IF) output of a mixer or a receiver. The method is particularly convenient for measuring the change in group delay with the local-oscillator (LO) tuning frequency of the receiver since the method does not require access to, or even knowledge of, the LO signal. The method employs a calibrated comb (impulse) generator. Other required equipment is limited to a reference signal generator and a digitizer of modest bandwidth, allowing the measurement to rely on a low-frequency generator and an oscilloscope. Simulated and measured data are presented to verify the approach
Empirical Issues in Lifetime Poverty Measurement
This paper demonstrates the implications of adopting an approach to measuring poverty that takes into account the lifetime experience of individuals rather than simply taking a static or cross-sectional perspective. Our approach follows the theoretical innovations in Hoy and Zheng (2008) which address various aspects of the specific pattern of any poverty spells experienced by an individual as well as a possible retrospective consideration that an individual might have concerning his life experience as a whole. For an individual, our perspective of lifetime poverty is influenced by both the snapshot poverty of each period and the poverty level of the permanent lifetime consumption; it is also influenced by how poverty spells are distributed over the lifetime. Using PSID data for the US, we demonstrate empirically the power of alternative axioms concerning how lifetime poverty should be measured when making pairwise comparisons of individual lifetime profiles of consumption (income) experiences. We also demonstrate the importance of taking a lifetime view of poverty in comparing poverty between groups by use of the classic FGT âsnapshotâ poverty index in conjunction with period weighting functions that explicitly reflect concerns about the pattern of poverty spells over individualsâ lifetimes.Lifetime poverty, snapshot poverty, chronic poverty, early poverty, poverty measurement
Conceptual analysis of a lunar base transportation system
Important to the planning for a lunar base is the development of transportation requirements for the establishment and maintenance of that base. This was accomplished as part of a lunar base systems assessment study conducted by the NASA Langley Research Center in conjunction with the NASA Johnson Space Center. Lunar base parameters are presented using a baseline lunar facility concept and timeline of developmental phases. Masses for habitation and scientific modules, power systems, life support systems, and thermal control systems were generated, assuming space station technology as a starting point. The masses were manifested by grouping various systems into cargo missions and interspersing manned flights consistent with construction and base maintenance timelines. A computer program that sizes the orbital transfer vehicles (OTV's), lunar landers, lunar ascenders, and the manned capsules was developed. This program consists of an interative technique to solve the rocket equation successively for each velocity correction (delta V) in a mission. The delta V values reflect integrated trajectory values and include gravity losses. As the program computed fuel masses, it matched structural masses from General Dynamics' modular space-based OTV design. Variables in the study included the operation mode (i.e., expendable vs. reusable and single-stage vs. two-stage OTV's), cryogenic specific impulse, reflecting different levels of engine technology, and aerobraking vs. all-propulsive return to Earth orbit. The use of lunar-derived oxygen was also examined for its general impact. For each combination of factors, the low-Earth orbit (LEO) stack masses and Earth-to-orbit (ETO) lift requirements are summarized by individual mission and totaled for the developmental phase. In addition to these discrete data, trends in the variation of study parameters are presented
Strain Hardening in Polymer Glasses: Limitations of Network Models
Simulations are used to examine the microscopic origins of strain hardening
in polymer glasses. While traditional entropic network models can be fit to the
total stress, their underlying assumptions are inconsistent with simulation
results. There is a substantial energetic contribution to the stress that rises
rapidly as segments between entanglements are pulled taut. The thermal
component of stress is less sensitive to entanglements, mostly irreversible,
and directly related to the rate of local plastic arrangements. Entangled and
unentangled chains show the same strain hardening when plotted against the
microscopic chain orientation rather than the macroscopic strain.Comment: 4 pages, 3 figure
Viscoplasticity and large-scale chain relaxation in glassy-polymeric strain hardening
A simple theory for glassy polymeric mechanical response which accounts for
large scale chain relaxation is presented. It captures the crossover from
perfect-plastic response to strong strain hardening as the degree of
polymerization increases, without invoking entanglements. By relating
hardening to interactions on the scale of monomers and chain segments, we
correctly predict its magnitude. Strain activated relaxation arising from the
need to maintain constant chain contour length reduces the dependence of
the characteristic relaxation time by a factor during
active deformation at strain rate . This prediction is consistent
with results from recent experiments and simulations, and we suggest how it may
be further tested experimentally.Comment: The theoretical treatment of the mechanical response has been
significantly revised, and the arguments for coherent relaxation during
active deformation made more transparen
Renal biopsy findings among Indigenous Australians: a nationwide review
Australia's Indigenous people have high rates of chronic kidney disease and kidney failure. To define renal disease among these people, we reviewed 643 renal biopsies on Indigenous people across Australia, and compared them with 249 biopsies of non-Indigenous patients. The intent was to reach a consensus on pathological findings and terminology, quantify glomerular size, and establish and compare regional biopsy profiles. The relative population-adjusted biopsy frequencies were 16.9, 6.6, and 1, respectively, for Aboriginal people living remotely/very remotely, for Torres Strait Islander people, and for non-remote-living Aboriginal people. Indigenous people more often had heavy proteinuria and renal failure at biopsy. No single condition defined the Indigenous biopsies and, where biopsy rates were high, all common conditions were in absolute excess. Indigenous people were more often diabetic than non-Indigenous people, but diabetic changes were still present in fewer than half their biopsies. Their biopsies also had higher rates of segmental sclerosis, post-infectious glomerulonephritis, and mixed morphologies. Among the great excess of biopsies in remote/very remote Aborigines, females predominated, with younger age at biopsy and larger mean glomerular volumes. Glomerulomegaly characterized biopsies with mesangiopathic changes only, with IgA deposition, or with diabetic change, and with focal segmental glomerulosclerosis (FSGS). This review reveals great variations in biopsy rates and findings among Indigenous Australians, and findings refute the prevailing dogma that most indigenous renal disease is due to diabetes. Glomerulomegaly in remote/very remote Aboriginal people is probably due to nephron deficiency, in part related to low birth weight, and probably contributes to the increased susceptibility to kidney disease and the predisposition to FSGS
Recommended from our members
The road to proactive maintenance: The ideal philosophy and the pain of implementation
The alphabet soups of maintenance, monitoring, diagnostic, and scheduling programs that are out there to help maintenance personnel perform their tasks in a planned and cost-efficient manner are many and varied. The optimum choice is out there somewhere. How do you read between the lines to select the methodology that helps you do your job and gets you where you want to be in the shortest amount of time and effort? The trick appears to be in how your organization is structured and what hoops and hurdles you have to overcome in that nasty phase called implementation. This paper will present some lessons learned in the school of hard knocks and some of what all maintenance organizations either have learned or will find out when they wade into the proactive maintenance philosophies that abound in the commercial world
- âŠ