In Situ Generation of Green Hybrid Nanofibrillar Polymer-Polymer Composites—A Novel Approach to the Triple Shape Memory Polymer Formation

The paper discusses the possibility of using in situ generated hybrid polymer-polymer nanocomposites as polymeric materials with triple shape memory, which, unlike conventional polymer blends with triple shape memory, are characterized by fully separated phase transition temperatures and strongest bonding between the polymer blends phase interfaces which are critical to the shape fixing and recovery. This was demonstrated using the three-component system polylactide/polybutylene adipateterephthalate/cellulose nanofibers (PLA/PBAT/CNFs). The role of in situ generated PBAT nanofibers and CNFs in the formation of efficient physical crosslinks at PLA-PBAT, PLA-CNF and PBAT-CNF interfaces and the effect of CNFs on the PBAT fibrillation and crystallization processes were elucidated. The in situ generated composites showed drastically higher values of strain recovery ratios, strain fixity ratios, faster recovery rate and better mechanical properties compared to the blend

Shear-Induced and Nanofiber-Nucleated Crystallization of Novel Aliphatic–Aromatic Copolyesters Delineated for In Situ Generation of Biodegradable Nanocomposites

The shear-induced and cellulose-nanofiber nucleated crystallization of two novel aliphatic–aromatic copolyesters is outlined due to its significance for the in situ generation of biodegradable nanocomposites, which require the crystallization of nanofibrous sheared inclusions at higher temperatures. The shear-induced non-isothermal crystallization of two copolyesters, namely, poly(butylene adipate-co-succinate-co-glutarate-co-terephthalate) (PBASGT) and poly(butylene adipate-co-terephthalate) (PBAT), was studied following a light depolarization technique. To have a deep insight into the process, the effects of the shear rate, shear time, shearing temperature and cooling rate on the initiation, kinetics, growth and termination of crystals were investigated. Films of 60 μm were subjected to various shear rates (100–800 s−1) for different time intervals during cooling. The effects of the shearing time and increasing the shear rate were found to be an elevated crystallization temperature, increased nucleation density, reduced growth size of lamella stacks and decreased crystallization time. Due to the boosted nucleation sites, the nuclei impinged with each other quickly and growth was hindered. The effect of the cooling rate was more significant at lower shear rates. Shearing the samples at lower temperatures, but still above the nominal melting point, further shifted the non-isothermal crystallization to higher temperatures. As a result of cellulose nanofibers’ presence, the crystallization of PBAT, analyzed by DSC, was shifted to higher temperatures

In Situ Generation of Green Hybrid Nanofibrillar Polymer-Polymer Composites—A Novel Approach to the Triple Shape Memory Polymer Formation

International audienceThe paper discusses the possibility of using in situ generated hybrid polymer-polymer nanocomposites as polymeric materials with triple shape memory, which, unlike conventional polymer blends with triple shape memory, are characterized by fully separated phase transition temperatures and strongest bonding between the polymer blends phase interfaces which are critical to the shape fixing and recovery. This was demonstrated using the three-component system polylactide/polybutylene adipateterephthalate/cellulose nanofibers (PLA/PBAT/CNFs). The role of in situ generated PBAT nanofibers and CNFs in the formation of efficient physical crosslinks at PLA-PBAT, PLA-CNF and PBAT-CNF interfaces and the effect of CNFs on the PBAT fibrillation and crystallization processes were elucidated. The in situ generated composites showed drastically higher values of strain recovery ratios, strain fixity ratios, faster recovery rate and better mechanical properties compared to the blend

Nanofibrillar Green Composites of Polylactide/Polyhydroxyalkanoate Produced in Situ Due to Shear Induced Crystallization

This study addresses the new concept of in situ inducing fibrillar morphology (micro or nanofibrils) of a minority component based on the simultaneous occurrence of orientation and shear induced crystallization of polymer fibers directly at the stage of extrusion in a single step. This possibility is demonstrated by using two entirely bio-sourced polymers: polylactide (PLA) and polyhydroxyalkanoate (PHA) as components. The shear induced crystallization allowed crystallization of PHA nanofibers immediately after applying high shear rate and elongation strain, avoiding subsequent cooling to initiate crystallization. Shearing of PHA increased non-isothermal crystallization temperature by 50 °C and decreased the temperature range in which the transition from a molten state to a crystallized one occurs by 17 °C. SEM observations demonstrate the successful transformation of the dispersed PHA phase into nanofibrils with diameters of nearly 200 nm. The transition from the droplets of PHA to fibers causes the brittle-to-ductile transition of the PLA matrix at a low concentration of PHA and contributes to the simultaneous increase of its rigidity and strength

Design of hybrid PLA/PBS/POM composite based on In-Situ formation of interpenetrating fiber networks

International audienc

Association between reproductive factors and postmenopausal osteoporosis

Objective: The present cross-sectional research was designed to study possible correlations between clinical reproductive factors and bone mineral density (BMD) values. Methods: Using the data gathered by the population-based Iranian Multicenter Osteoporosis Study (IMOS), we investigated the correlation found between reproductive factors and osteoporosis. Subjects were recruited from five major cities of Iran. Bone mineral density was measured using Dual-Energy; X-ray Absorptiometry and the results were analyzed against the age at menarche and at menopause, number of pregnancies, children and abortions, and the history (and duration) of breastfeeding. Results: Data was available for 2528 women. Gravidity and number of children were reversely correlated with BMD. Younger age at menarche was associated with higher BMD values, whereas there was no significant correlation between age at menopause and menstrual history and BMD. Conclusion: Our study suggests that clinical reproductive factors, particularly number of children and breastfeeding, could be incorporated as predictors of BMD levels in women. Given the controversial results obtained in different studies, longitudinal studies should be carried out to enlighten the importance of these factors and the rationale of their use to predict BMD values in different settings

Formation of UHMWPE Nanofibers during Solid-State Deformation

A network of nanofibers is formed in situ through solid-state deformation of disentangled ultra-high molecular weight polyethylene (dis-UHMWPE) during compounding with a polyolefin elastomer below the melting temperature of dis-UHMWPE crystals. Dis-UHMWPE was prepared in the form of powder particles larger than 50 μm by polymerization at low temperatures, which favored the crystallization and prevention of macromolecules from entangling. Shearing the blend for different durations and at different temperatures affects the extent to which the grains of dis-UHMWPE powder deform into nanofibers. Disentangled powder particles could deform into a network of nanofibers with diameters between 110 and 340 nm. The nanocomposite can be further sheared for a longer time to decrease the diameter of dis-UHMWPE nanofibers below 40 nm, being still composed of ≈70 wt.% of crystalline and ≈30 wt.% of amorphous components. Subsequently, these thinner fibers begin to melt and fragment because they are thinner and also because the amorphous defects locally decrease the nanofibers’ melting temperature, which results in their fragmentation and partial loss of nanofibers. These phenomena limit the thickness of dis-UHMWPE nanofibers, and this explains why prolonged or more intense shearing does not lead to thinner nanofibers of dis-UHMWPE when compounded in a polymeric matrix

The Role of Nuclear Medicine in The Diagnosis and Management of Solitary Pulmonary Nodules

  Solitary pulmonary nodule (SPN) is a frequent finding on the chest x-ray and computed tomography. Nuclear medicine techniques play an important role in the diagnosis and management of SPN. In the current review, we briefly will explain the different nuclear medicine modalities in this regard including positron emission tomography (PET) using 18-F-FDG, and 11-C-Methionine, and single photon emission computerized tomography (SPECT) using somatostatin receptor scintigraphy, 201-Thallium, and 99m-Tc-MIBI.