Production and purification of VP2 protein of porcine parvovirus expressed in an insect-baculovirus cell system

The porcine parvovirus (PPV) VP2 protein was expressed in an insect-baculovirus cell system and was purified using Ni-NTA affinity column chromatography. The recombinant 6-His-tagged VP2 protein with molecular mass (Mr) of about 64 kDa was detected by anti-his antibody and anti-PPV serum. Electron microscopy showed that the purified VP2 protein assembled into spherical particles with diameters ranging from 20 to 22 nm. The expressed VP2 was antigenically similar to the native capsid protein according to HA and a Western blotting assay performed with polyclonal antibodies collected from an outbreak of PPV in one farm. This study provides a foundation for the application of VP2 protein in the clinical diagnosis of PPV or in the vaccination against PPV in the future

Computational study of atomic mobility for bcc phase in Ti-Al-Fe system

Experimental diffusion data were critically assessed to develop the atomic mobility for the bcc phase of the Ti–Al–Fe system by using the DICTRA software. Good agreements were obtained from comprehensive comparisons made between the calculated and the experimental diffusion coefficients. The developed atomic mobility was then validated by well predicting the interdiffusion behavior observed from the diffusion-couple experiments in available literature

Impacts of plastic film mulching on crop yields, soil water, nitrate, and organic carbon in Northwestern China: A meta-analysis

In order to increase crop yield in semi-arid and arid areas, plastic film mulching (PFM) is widely used in Northwestern China. To date, many studies have addressed the effects of PFM on soil physical and biochemical properties in rain-fed agriculture in Northwestern China, but the findings of different studies are often contradictory. Therefore, a comprehensive review of the impacts of PFM on soil water content, soil nutrients and food production is needed. We compiled the results of 1278 observations to evaluate the overall effects of PFM on soil water content, the distribution of nitrate and soil organic carbon, and crop yield in rain-fed agriculture in Northwestern China. Our results showed that PFM increased soil moisture and nitrate concentration in topsoils (0–20 cm) by 12.9% and 28.2%, respectively, but slightly decreased (1.8%) soil organic carbon (SOC) content in the 0–10 cm soil layer. PFM significantly increased grain yields by 43.1%, with greatest effect in spring maize (79.4%). When related to cumulative precipitation during the crop growing season, yield increase from PFM was greatest (72.8%) at 200–300 mm, which was attributed to the large increase for spring maize and potato, implying that crop zoning would be beneficial for PFM in this region. When related to N application rate, crop yields benefited most from PFM (80.2%) at 200–300 kg/ha. A cost-benefit analysis indicated that PFM increased economic return by an average of 29.5%, with the best improvement for spring maize (71.1%) and no increase for spring wheat. In conclusion, PFM can significantly increase crop yield and economic return (especially for spring maize) in rain-fed agriculture areas of Northwestern China. Crop zoning is recommended for PFM to achieve the largest economic benefit. However, full account needs to be taken of the environmental impacts relating to N loss, SOC depletion and film pollution to evaluate the sustainability of PFM systems and further research is required to quantify and mitigate these impacts

Production and purification of VP2 protein of porcine parvovirus expressed in an insect-baculovirus cell system

Abstract The porcine parvovirus (PPV) VP2 protein was expressed in an insect-baculovirus cell system and was purified using Ni-NTA affinity column chromatography. The recombinant 6-His-tagged VP2 protein with molecular mass (Mr) of about 64 kDa was detected by anti-his antibody and anti-PPV serum. Electron microscopy showed that the purified VP2 protein assembled into spherical particles with diameters ranging from 20 to 22 nm. The expressed VP2 was antigenically similar to the native capsid protein according to HA and a Western blotting assay performed with polyclonal antibodies collected from an outbreak of PPV in one farm. This study provides a foundation for the application of VP2 protein in the clinical diagnosis of PPV or in the vaccination against PPV in the future.</p

Research on Modification of Fe₃O₄ Magnetic Nanoparticles with Two Silane Coupling Agents

As a novel functional nanomaterial, Fe3O4 magnetic nanoparticles (MNPs) modified by different surfactants have attracted and are attracting worldwide interest. In this research, we introduced two different silane coupling agents to modify Fe3O4 MNPs instead of a single surfactant to achieve complete coating and functionalization. The modification mechanism was also explained. Techniques such as TEM, XRD, FT-IR, TG-DSC, and VSM were applied to characterize the obtained modified Fe3O4 sample. From these techniques, the following information is obtained: The characteristic bands of TEOS and KH-792 were present in the FT-IR spectra and in the XPS plots of modified Fe3O4 MNPs, demonstrating that the silane coupling agents were present in the sample obtained after the modification. The TG analysis of the modified sample showed complete decomposition at 228 °C. The mass ratio of the sample obtained before and after the modification was close to 29:65. The XRD patterns show that the modified Fe3O4 MNPs possessed an identical reverse spinel crystal structure as an unmodified Fe3O4 sample. The modification decreased the saturation magnetization of Fe3O4 MNPs from 70.04 emu/g to 57.41 emu/g and the coating did not change the superparamagnetism of Fe3O4 MNPs

Steady-State and Dynamic Rheological Properties of a Mineral Oil-Based Ferrofluid

In this study, nanoparticles were suspended in L-AN32 total loss system oil. The thixotropic yield behavior and viscoelastic behavior of ferrofluid were analyzed by steady-state and dynamic methods and explained according to the microscopic mechanism of magneto-rheology. The Herschel&ndash;Bulkley (H&ndash;B) model was used to fit the ferrofluid flow curves, and the observed static yield stress was greater than the dynamic yield stress. Both the static and dynamic yield stress values increased as the magnetic field increased, and the corresponding shear thinning viscosity curve increased more significantly as the magnetic field strength increased. The amplitude scanning results show that the linear viscoelastic region (LVE) is reached when the shear stress is 10%. The frequency scanning results showed that the storage modulus increased with the increase of the frequency at first. The storage modulus increased steadily at a higher frequency range, while the loss modulus increased slowly at the initial stage and rapidly at the later stage. In the amplitude sweep and frequency sweep experiments, the energy storage modulus and loss modulus are enhanced with the decrease of temperature. These findings are helpful to better understand the microscopic mechanism of magneto-rheology of ferrofluids, and also provide guidance for many practical applications

Steady-State and Dynamic Rheological Properties of a Mineral Oil-Based Ferrofluid

In this study, nanoparticles were suspended in L-AN32 total loss system oil. The thixotropic yield behavior and viscoelastic behavior of ferrofluid were analyzed by steady-state and dynamic methods and explained according to the microscopic mechanism of magneto-rheology. The Herschel–Bulkley (H–B) model was used to fit the ferrofluid flow curves, and the observed static yield stress was greater than the dynamic yield stress. Both the static and dynamic yield stress values increased as the magnetic field increased, and the corresponding shear thinning viscosity curve increased more significantly as the magnetic field strength increased. The amplitude scanning results show that the linear viscoelastic region (LVE) is reached when the shear stress is 10%. The frequency scanning results showed that the storage modulus increased with the increase of the frequency at first. The storage modulus increased steadily at a higher frequency range, while the loss modulus increased slowly at the initial stage and rapidly at the later stage. In the amplitude sweep and frequency sweep experiments, the energy storage modulus and loss modulus are enhanced with the decrease of temperature. These findings are helpful to better understand the microscopic mechanism of magneto-rheology of ferrofluids, and also provide guidance for many practical applications

Factors Affecting the Physical Properties of Edible Composite Film Prepared from Zein and Wheat Gluten

molecule

Preparation and Characterization of a New Low Refractive Index Ferrofluid

In this research, a new low refractive index ferrofluid is proposed by coating magnetic nanoparticles with a layer of silver, applying the method of modified chemical co-precipitation. This preparation method is green and environmentally friendly without toxic gases being released. Coated nanoparticles are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDS), X-ray photoelectron spectroscopy (XPS), and vibration sample magnetometery (VSM). These characterizations show that the silver nanoparticles grow on the surface of magnetic nanoparticles in this new ferrofluid. The hysteresis loop of this new ferrofluid demonstrates that it maintains superparamagnetic properties. A new method of refractive index measurement is applied in this research by employing a long-period grating (LPG) optical fiber sensor. The change value in the refractive index per unit concentration reduces by 16.46% compared to the conventional ferrofluid