1,504 research outputs found
Development of preliminary design concept for multifunction display and control system for Orbiter crew station. Task 3: Concept analysis
The access schema developed to access both individual switch functions as well as automated or semiautomated procedures for the orbital maneuvering system and electrical power and distribution and control system discussed and the operation of the system is described. Feasibility tests and analyses used to define display parameters and to select applicable hardware choices for use in such a system are presented and the results are discussed
Development of preliminary design concept for a multifunction display and control system for the Orbiter crew station. Task 4: Design concept recommendation
Application of multifunction display and control systems to the NASA Orbiter spacecraft offers the potential for reducing crew workload and improving the presentation of system status and operational data to the crew. A design concept is presented for the application of a multifunction display and control system (MFDCS) to the Orbital Maneuvering System and Electrical Power Distribution and Control System on the Orbiter spacecraft. The MFDCS would provide the capability for automation of procedures, fault prioritization and software reconfiguration of the MFDCS data base. The MFDCS would operate as a stand-alone processor to minimize the impact on the current Orbiter software. Supervisory crew command of all current functions would be retained through the use of several operating modes in the system. Both the design concept and the processes followed in defining the concept are described
Application of multi-function display and control technology
The NASA orbiter spacecraft incorporates a complex array of systems, displays, and controls. The incorporation of discrete dedicated controls into a multifunction display and control system (MFDCS) offers the potential for savings in weight, power, panel space, and crew training time. Technology identified as applicable to a MFDCS is applied to the orbiter orbital maneuvering system (OMS) and the electrical power distribution and control system (EPDCS) to derive concepts for a MFDCS design. Several concepts of varying degrees of performance and complexity are discussed and a suggested concept for further development is presented in greater detail. Both the hardware and software aspects and the human factors considerations of the designs are included
How much solute is needed to inhibit the fluid to gel membrane phase transition at low hydration?
We present a quantitative study of the effect of sugars on the membrane gel-fluid phase transition as a function of sugar:lipid ratio. We show that the maximum effect occurs at around 1.5 sugar rings per molecule for both mono- and di-saccharides. We present a theoretical model to try to explain these results, and discuss the assumptions inherent in the model
Recommended from our members
Alloys for advanced steam turbines--Oxidation behavior
Advanced or ultra supercritical (USC) steam power plants offer the promise of higher efficiencies and lower emissions. Current goals of the U.S. Department of Energy (DOE) include power generation from coal at 60% efficiency, which would require steam temperatures of up to 760°C. Current research on the oxidation of candidate materials for advanced steam turbines is presented with a focus on a methodology for estimating chromium evaporation rates from protective chromia scales. The high velocities and pressures of advanced steam turbines lead to evaporation predictions as high as 5 × 10-8 kg m-2s-1 of CrO2(OH)2(g) at 760°C and 34.5 MPa. This is equivalent to 0.077 mm per year of solid Cr loss
Recommended from our members
Effects of Temperature Gradients and Heat Fluxes on High-Temperature Oxidation
The effects of a temperature gradient and heat flux on point defect diffusion in protective oxide scales were examined. Irreversible thermodynamics were used to expand Fick’s first law of diffusion to include a heat-flux term—a Soret effect. Oxidation kinetics were developed for the oxidation of cobalt and of nickel doped with chromium. Research is described to verify the effects of a heat flux by oxidizing pure cobalt in a temperature gradient at 900 °C, and comparing the kinetics to isothermal oxidation. No evidence of a heat flux effect was found
Countercurrent Gaseous Diffusion Model of Oxidation Through a Porous Coating
A countercurrent gaseous diffusion model was developed to describe oxidation through porous coatings and scales. The specific system modeled involved graphite oxidized through a porous alumina (Al{sub 2}O{sub 3}) overcoat between 570 C (1,058 F) and 975 C (1,787 F). The model separated the porous Al{sub 2}O{sub 3} coating into two gas diffusion regions separated by a flame front, where oxygen (O{sub 2}) and carbon monoxide (CO) react to form carbon dioxide (CO{sub 2}). In the outer region O{sub 2} and CO{sub 2} counterdiffused. In the inner region, CO{sub 2} and CO counterdiffused. Concentration gradients of each gaseous specie in the pores of the Al{sub 2}O{sub 3} were determined, and the oxidation rate was calculated. The model was verified by oxidation experiments using graphite through various porous Al{sub 2}O{sub 3} overcoats. The Al{sub 2}O{sub 3} overcoats ranged in fractional porosity and in average pore radius from 0.077 {micro}m (3.0 x 10{sup -6} in., Knudsen diffusion) to 10.0 {micro}m (3.9 x 10{sup -4} in., molecular diffusion). Predicted and measured oxidation rates were shown to have the same dependence upon porosity, pore radius, temperature, and oxygen partial pressure (P{sub O{sub 2}}). Use of the model was proposed for other oxidation systems and for chemical vapor infiltration (CVI). This work was part of the U.S. Bureau of Mines corrosion research program
Recommended from our members
Task 2—Materials for Advanced Boiler and Oxy-combustion Systems (NETL-US),” a
Develop a method for determining the solubility of protective oxides (Fe2O3, Cr2O3 and NiO) in an ash exposed at a particular temperature and gas composition. Metal oxide powder (Cr2O3 and NiO) will be mixed with a synthetic ash, milled for complete mixing, exposed at a variety of exposure times, and removed for analysis. • A decision will be made based on the results on to going further with the next tasks. • Perform the solubility tests on synthetic ashes and ashes collected from various oxyfuel burner rigs. • Correlate the solubility with long term corrosion tests and variables from the b i 4 burner rig tests
Recommended from our members
Calculation of Reactive-evaporation Rates of Chromia
A methodology is developed to calculate Cr-evaporation rates from Cr2O3 with a flat planar geometry. Variables include temperature, total pressure, gas velocity, and gas composition. The methodology was applied to solid-oxide, fuel cell conditions for metallic interconnects and to advanced-steam turbines conditions. The high velocities and pressures of the advanced steam turbine led to evaporation predictions as high as 5.18 9 10-8 kg/m2/s of CrO2(OH)2(g) at 760 °C and 34.5 MPa. This is equivalent to 0.080 mm per year of solid Cr loss. Chromium evaporation is expected to be an important oxidation mechanism with the types of nickel-base alloys proposed for use above 650 °C in advanced-steam boilers and turbines. It is shown that laboratory experiments, with much lower steam velocities and usually much lower total pressure than found in advanced steam turbines, would best reproduce chromium-evaporation behavior with atmospheres that approach either O2 + H2O or air + H2O with 57% H2O
Critical thickness and orbital ordering in ultrathin La0.7Sr0.3MnO3 films
Detailed analysis of transport, magnetism and x-ray absorption spectroscopy
measurements on ultrathin La0.7Sr0.3MnO3 films with thicknesses from 3 to 70
unit cells resulted in the identification of a lower critical thickness for a
non-metallic, non-ferromagnetic layer at the interface with the SrTiO3 (001)
substrate of only 3 unit cells (~12 Angstrom). Furthermore, linear dichroism
measurements demonstrate the presence of a preferred (x2-y2) in-plane orbital
ordering for all layer thicknesses without any orbital reconstruction at the
interface. A crucial requirement for the accurate study of these ultrathin
films is a controlled growth process, offering the coexistence of
layer-by-layer growth and bulk-like magnetic/transport properties.Comment: 22 pages, 6 figures, accepted for publication in Physical Review
- …