Composite load spectra for select space propulsion structural components

This report summarizes the development for: (1) correlation fields; (2) applications to liquid oxygen post; (3) models for pressure fluctuatios and vibration loads fluctuations; (4) additions to expert systems; and (5) scaling criteria. Implementation to computer code is also described. Demonstration sample cases are included with additional applications to engine duct and pipe bend

Composite load spectra for select space propulsion structural components

The work performed to develop composite load spectra (CLS) for the Space Shuttle Main Engine (SSME) using probabilistic methods. The three methods were implemented to be the engine system influence model. RASCAL was chosen to be the principal method as most component load models were implemented with the method. Validation of RASCAL was performed. High accuracy comparable to the Monte Carlo method can be obtained if a large enough bin size is used. Generic probabilistic models were developed and implemented for load calculations using the probabilistic methods discussed above. Each engine mission, either a real fighter or a test, has three mission phases: the engine start transient phase, the steady state phase, and the engine cut off transient phase. Power level and engine operating inlet conditions change during a mission. The load calculation module provides the steady-state and quasi-steady state calculation procedures with duty-cycle-data option. The quasi-steady state procedure is for engine transient phase calculations. In addition, a few generic probabilistic load models were also developed for specific conditions. These include the fixed transient spike model, the poison arrival transient spike model, and the rare event model. These generic probabilistic load models provide sufficient latitude for simulating loads with specific conditions. For SSME components, turbine blades, transfer ducts, LOX post, and the high pressure oxidizer turbopump (HPOTP) discharge duct were selected for application of the CLS program. They include static pressure loads and dynamic pressure loads for all four components, centrifugal force for the turbine blade, temperatures of thermal loads for all four components, and structural vibration loads for the ducts and LOX posts

Metric-affine gauge theory of gravity II. Exact solutions

In continuing our series on metric-affine gravity (see Gronwald IJMP D6 (1997) 263 for Part I), we review the exact solutions in this theory.Comment: Revtex file, 25 pages, final version to appear in IJMP

Thermal stability of titanium nitride for shallow junction solar cell contacts

To demonstrate the thermal stability of titanium nitride as a high-temperature diffusion barrier, the TiN-Ti-Ag metallization scheme has been tested on shallow-junction (~2000 Å) Si solar cells. Electrical measurements on reference samples with the Ti-Ag metallization scheme show serious degradation after a 600 °C, 10-min annealing. With the TiN-Ti-Ag scheme, no degradation of cell performance is observed after the same heat treatment if the TiN layer is >~1700 Å. The glass encapsulation of cells by electrostatic bonding requires such a heat treatment

Bose-Einstein Condensates with Large Number of Vortices

We show that as the number of vortices in a three dimensional Bose-Einstein Condensate increases, the system reaches a "quantum Hall" regime where the density profile is a Gaussian in the xy-plane and an inverted parabolic profile along z. The angular momentum of the system increases as the vortex lattice shrinks. However, Coriolis force prevents the unit cell of the vortex lattice from shrinking beyond a minimum size. Although the recent MIT experiment is not exactly in the quantum Hall regime, it is close enough for the present results to be used as a guide. The quantum Hall regime can be easily reached by moderate changes of the current experimental parameters.Comment: 4 pages, no figure

Observation of Mass Transport through Solid 4He

By use of a novel experimental design, one that provides for superfluid helium in contact with bulk hcp 4He off the melting curve, we have observed the DC transport of mass through a cell filled with solid 4He in the hcp region of the phase diagram. Flow, which shows characteristics of a superflow, is seen to be independent of the method used to grow the solid, but depends on pressure and temperature. The temperature dependence suggests the possibility of hysteresis.Comment: 1 zipped file, produces 16 page paper, with 20 figures; resubmitted with typos corrected, a figure corrected, some discussion improved, and additional references - still 16 pages and 20 figure

Suppressed dependence of polarization on epitaxial strain in highly polar ferroelectrics

A combined experimental and computational investigation of coupling between polarization and epitaxial strain in highly polar ferroelectric PbZr_0.2Ti_0.8O_3 (PZT) thin films is reported. A comparison of the properties of relaxed (tetragonality c/a = 1.05) and highly-strained (c/a = 1.09) epitaxial films shows that polarization, while being amongst the highest reported for PZT or PbTiO_3 in either film or bulk forms (P_r = 82 microC/cm^2), is almost independent of the epitaxial strain. We attribute this behavior to a suppressed sensitivity of the A-site cations to epitaxial strain in these Pb-based perovskites, where the ferroelectric displacements are already large, contrary to the case of less polar perovskites, such as BaTiO_3. In the latter case, the A-site cation (Ba) and equatorial oxygen displacements can lead to substantial polarization increases.Comment: 4 pages, 3 figure

Multiplpe Choice Minority Game With Different Publicly Known Histories

In the standard Minority Game, players use historical minority choices as the sole public information to pick one out of the two alternatives. However, publishing historical minority choices is not the only way to present global system information to players when more than two alternatives are available. Thus, it is instructive to study the dynamics and cooperative behaviors of this extended game as a function of the global information provided. We numerically find that although the system dynamics depends on the kind of public information given to the players, the degree of cooperation follows the same trend as that of the standard Minority Game. We also explain most of our findings by the crowd-anticrowd theory.Comment: Extensively revised, to appear in New J Phys, 7 pages with 4 figure