42,985 research outputs found
Biodegradable Polylactic Acid (PLA) Microstructures for Scaffold Applications
In this research, we present a simple and cost effective soft lithographic
process to fabricate PLA scaffolds for tissue engineering. In which, the
negative photoresist JSR THB-120N was spun on a glass subtract followed by
conventional UV lithographic processes to fabricate the master to cast the PDMS
elastomeric mold. A thin poly(vinyl alcohol) (PVA) layer was used as a mode
release such that the PLA scaffold can be easily peeled off. The PLA precursor
solution was then cast onto the PDMS mold to form the PLA microstructures.
After evaporating the solvent, the PLA microstructures can be easily peeled off
from the PDMS mold. Experimental results show that the desired microvessels
scaffold can be successfully transferred to the biodegradable polymer PLA.Comment: Submitted on behalf of EDA Publishing Association
(http://irevues.inist.fr/EDA-Publishing
The Nonduality of Motion and Rest: Sengzhao on the Change of Things
In his essay “Things Do Not Move,” Sengzhao (374?−414 CE), a prominent Chinese Buddhist philosopher, argues for the thesis that the myriad things do not move in time. This view is counter-intuitive and seems to run counter to the Mahayana Buddhist doctrine of emptiness. In this book chapter, I assess Sengzhao’s arguments for his thesis, elucidate his stance on the change/nonchange of things, and discuss related problems. I argue that although Sengzhao is keen on showing the plausibility of the thesis, he actually views the myriad things as both changing and unchanging and upholds the nonduality of motion and rest. In fact, the nonmoving thesis follows from the discernment that things change from moment to moment without there being any enduring stuff in the process. Among philosophical works that confer a higher ontological status on nonchange over change, Sengzhao’s essay is unique and well worth pondering
Iron Emission in the z=6.4 Quasar SDSS J114816.64+525150.3
We present near-infrared J and K-band spectra of the z = 6.4 quasar SDSS
J114816.64+525150.3 obtained with the NIRSPEC spectrograph at the Keck-II
telescope, covering the rest-frame spectral regions surrounding the C IV 1549
and Mg II 2800 emission lines. The iron emission blend at rest wavelength
2900-3000 A is clearly detected and its strength appears nearly
indistinguishable from that of typical quasars at lower redshifts. The Fe II /
Mg II ratio is also similar to values found for lower-redshift quasars,
demonstrating that there is no strong evolution in Fe/alpha broad-line emission
ratios even out to z=6.4. In the context of current models for iron enrichment
from Type Ia supernovae, this implies that the SN Ia progenitor stars formed at
z > 10. We apply the scaling relations of Vestergaard and of McLure & Jarvis to
estimate the black hole mass from the widths of the C IV and Mg II emission
lines and the ultraviolet continuum luminosity. The derived mass is in the
range (2-6)x10^9 solar masses, with an additional uncertainty of a factor of 3
due to the intrinsic scatter in the scaling relations. This result is in
agreement with the previous mass estimate of 3x10^9 solar masses by Willott,
McLure, & Jarvis, and supports their conclusion that the quasar is radiating
close to its Eddington luminosity.Comment: To appear in ApJ Letter
The vertical metal insulator semiconductor tunnel transistor: A proposed Fowler-Nordheim tunneling device
We propose a new field-effect transistor, the vertical metal insulator semiconductor tunnel transistor (VMISTT) which operates using gate modulation of the Fowler-Nordheim tunneling current through a metal insulator semiconductor (M-I-S) diode. The VMISTT has significant advantages over the metal-oxide-semiconductor field-effect transistor in device scaling. In order to allow room-temperature operation of the VMISTT, the tunnel oxide has to be optimized for the metal-to-insulator barrier height and the current-voltage characteristics. We have grown TiO2 layers as the tunnel insulator by oxidizing 7 and 10 nm thick Ti metal films vacuum-evaporated on silicon substrates, and characterized the films by current-voltage and capacitance-voltage techniques. The quality of the oxide films showed variations, depending on the oxidation temperatures in the range of 450-550 degrees C. Fowler-Nordheim tunneling was observed at low temperatures at bias voltage of 2 V and above and a barrier height of approximately 0.4 eV was calculated. Leakage currents present were due Schottky-barrier emission at room-temperature, and hopping at liquid nitrogen temperature
- …