Spin-dependent electron transport through the ferromagnet/semiconductor interface induced by photon excitation

Circularly polarized light was used to excite electrons with a spin polarization perpendicular to the film plane in 3 nm Au/5 nm Co/GaAs (110) structures. At perpendicular saturation, the bias dependence of the photocurrent was observed to change in the range around 0.7 eV, corresponding to the Schottky barrier height. The photocurrent is observed to change significantly as a function of the magnetization direction with respect to the photon helicity, indicating spin-dependent transport between the semiconductor and the ferromagnetic layer at room temperature

Spin polarization control through resonant states in an Fe/GaAs Schottky barrier

Spin polarization of the tunnel conductivity has been studied for Fe/GaAs junctions with Schottky barriers. It is shown that band matching of resonant interface states within the Schottky barrier defines the sign of spin polarization of electrons transported through the barrier. The results account very well for experimental results including the tunneling of photo-excited electrons, and suggest that the spin polarization (from -100% to 100%) is dependent on the Schottky barrier height. They also suggest that the sign of the spin polarization can be controlled with a bias voltage.Comment: 5 pages, 4 figure

Spin-polarized electron transport processes at the ferromagnet/semiconductor interface

Circularly polarized light was used to excite electrons with a spin polarization perpendicular to the film plane in ferromagnet/semiconductor hybrid structures. The Schottky characteristics at the interface were varied by using NiFe, Co and Fe as the ferromagnet. The Schottky characteristics were clearly observed with NiFe and Co/GaAs, while almost ohmic I-V characteristics were seen with Fe/GaAs. At negative bias a helicity-dependent photocurrent, dependent upon the magnetization configuration of the film and the Schottky barrier height, was detected upon modulating the polarization from right to left circular, For the magnetization along or perpendicular to the surface normal, the helicity-dependent photocurrent In or I 0, respectively, was measured. The asymmetry P=(In-I0)/(In+I0) of the helicity-dependent photocurrent decreases upon increasing the doping density of the GaAs substrates. P also decreases with photon energy h¿ as found for the polarization of photoexcited electrons in GaAs. In NiFe/GaAs samples for h¿=1.59 eV, P=16% for n+=1023 m-3 and P=-23% for p-=1025 m-3 doped substrates, i.e. P is comparable in magnitude to the theoretically predicted spin polarization of 50% for the optically pumped conduction band in GaAs. The results provide unambiguous evidence of spin-polarized electron transport through the ferromagnet/semiconductor interface and show that the Schottky barrier height controls the spin-polarized electron current passing from the semiconductor to the ferromagnet. The asymmetry data indicates that spin-polarized electrons are transmitted from the semiconductor to the ferromagnet with a high efficiency

Magnetic characterization and switching of Co nano-rings in current-perpendicular-to-plane configuration

We fabricated Co nano-rings incorporated in the vertical pseudo-spin-valve nanopillar structures with deep submicron lateral sizes. It is shown that the current-perpendicular-to-plane giant magnetoresistance can be used to characterize a very small magnetic nano-ring effectively. Both the onion state and the flux-closure vortex state are observed. The Co nano-rings can be switched between the onion states as well as between onion and vortex states not only by the external field but also by the perpendicularly injected dc current

Pseudo-Hall effect and anisotropic magnetoresistance in a micronscale Ni80Fe20 device

The pseudo-Hall effect (PHE) and anisotropic magnetoresistance (AMR) in a micronscale Ni80Fe20, six-terminal device, fabricated by optical lithography and wet chemical etching from a high quality UHV grown 30 Angstrom Au/300 Angstrom Ni80Fe20 film, have been studied. The magnetisation reversal in different parts of the device has been measured using magneto-optical Kerr effect (MOKE), The device gives a 50% change in PHE voltage with an ultrahigh sensitivity of 7.3%Oe(-1) at room temperature. The correlation between the magnetisation, magneto-transport properties, lateral shape of the device and directions of the external applied field is discussed based on extensive MOKE, AMR and PHE results

Influence of lateral geometry on magnetoresistance and magnetisation reversal in Ni80Fe20 wires

The magnetisation reversal processes and magnetoresistance behaviour in micron-sized Ni80Fe20 wires with triangular and rectangular modulated width have been studied. The wires were fabricated by electron beam lithography and a lift-off process. A combination of magnetic force microscopy (MFM), magneto-optical Kerr effect (MOKE) and magnetoresistance (MR) measurements shows that the lateral geometry of the wires greatly influences the magnetic and transport properties. The width modulations modify not only the shape-dependent demagnetising fields, but also the current density. The correlation between the lateral geometry, the magnetic and the transport properties is discussed based on MFM, MOKE and MR results

Magnetic domain studies of permalloy wire-based structures with junctions

Permalloy (Ni-80 Fe-20) wire-based structures (30 nm thick and 1 . w . 10 mum wide) with junctions (crosses, networks, H-shapes, rectangular chains and ring chains) prepared on a GaAs (100) substrate were observed in both their demagnetized and remanent states by magnetic force microscopy (MFM) in order to investigate the role of junction geometry in domain formation, Except in ring chains, two classes of domain configuration are found at the junction: (i) a domain wall-like feature due to abrupt spin rotation and (ii) a triangle-shape domain consistent with a flux closure configuration, Ring chains, on the other hand, form vortex domains at every other junction. The MFM observations are compared with micromagnetic calculations which qualitatively support the magnetic domain configurations

Magnetic domain evolution in permalloy mesoscopic dots

Permalloy (Ni80Fe20) squares (30 nm thick and w mu m wide; 1 less than or equal to w less than or equal to 200 mu m) and circular disks (30 nm thick and r mu m diameter; 1 less than or equal to r less than or equal to 200 mu m) prepared on a GaAs (100) substrate were observed in both their demagnetized and remanent states by magnetic force microscopy (MFM) associated with non-contact atomic force microscopy (NC-AFM). The squares (2 less than or equal to w mu m) exhibited conventional closure domains and the corner plays a very important role in creating new walls. The circular disks, on the other hand, formed either vortex domain (5 less than or equal to r less than or equal to 20 mu m) or multi-domain (50 less than or equal to r mu m) states, The magnetization rotation is observed by MFM to change according to the size and shape of the elements, The MFM observations are supported by micromagnetic calculations which confirm the effect of the corner on the domain wall formation

Magnetization reversal in mesoscopic Ni80Fe20 wires: A magnetic domain launching device

The magnetization reversal process in mesoscopic permalloy (Ni80Fe20) wire structures has been investigated using scanning Kerr microscopy, magnetic force microscopy (MFM) and micromagnetic calculations. We find that the junction offers a site for reversed domain wall nucleation in the narrow part of the wires. As a consequence, the switching field is dominated by the domain nucleation field and the junction region initiates reversal by the wall motion following the nucleation of domains. Our results suggest the possibility of designing structures that can be used to “launch” reverse domains in narrow wires within a controlled field rang

Anomalous Hall voltage rectification and quantized spin-wave excitation induced by the simultaneous dc- and rf-current application in Ni81Fe19 wire

An anomalous Hall effect and rectification of a Hall voltage are observed by applying a radio-frequency (rf) current through a single-layered ferromagnetic wire located on a coplanar waveguide. The components of the magnetization precession, both in and perpendicular to the plane, can be detected via the Hall voltage rectification of the rf current by incorporating an additional direct (dc) current. In this paper, we propose a phenomenological model, which describes the time-dependent anisotropic magnetoresistance and time-dependent planer Hall effect. The nonlinearity of the spin dynamics accompanied by spin-waves as functions of rf and dc currents is also studied, as well as those of the magnitude and orientation of the external magnetic field.Comment: 42 pages, 5 figures, submitte