Cloning of a peroxidase enzyme involved in the biosynthesis of pharmaceutically active terpenoid indole alkaloids in Catharanthus roseus (L.) G. Don

info:eu-repo/semantics/publishedVersio

Cloning of a peroxidase enzyme involved in the biosynthesis of pharmaceutically active terpenoid indole alkaloids in Catharanthus roseus (L.) G. Don

info:eu-repo/semantics/publishedVersio

Plastic waste use as aggregate and binder modifier in open-graded asphalts

Road pavements are very important infrastructures for the Society, but they can cause serious environmental impacts during construction, operation and rehabilitation phases. Thus, it is essential to develop surface paving solutions that promote not only the durability but also a comfortable and safe use. In fact, this work aims to study the properties of new opengraded mixtures for surface layers produced with plastic wastes. First, HDPE and EVA wastes were used as bitumen modifiers, and then another plastic waste (PEX) replaced part of the aggregates. After studying the modified binders, the open-graded mixtures were designed, and then they were tested concerning their particle loss, rutting resistance, surface texture and damping effect. It was concluded that both ways of using the plastic wastes can improve the mechanical and functional properties of the open-graded mixtures related to the pavement performance.ERDF funds through the Operational Competitiveness Program – COMPETE and the National funds by FCT – Portuguese Foundation for Science and Technology in the scope of PLASTIROADS Project FCOMP-01-0124-FEDER-020335 (PTDC/ECM/119179/2010)

The effect of the process on mechanical properties of polylactic acid - date palm leaf fibers composite films produced by extrusion blowing

Biocomposite films prepared with melt compounding and film blowing have become a new trend in plastic research to deliver more eco-friendly packages. Polylactic acid (PLA) was melt compounded with minimally processed date palm leaf fiber (DPLF) and converted into films by blown film extrusion. The compounding was done in order to enhance the film mechanical properties in one hand, and to decrease the film production cost in the other hand. In this present study, a reference PLA film and films with 1%, 2%, and 5% of DPLF (weight %) were produced with different process parameters. The spatial variations in films thickness and lay flat width indicate that the addition of DPLF up to 2% enhances the bubble stability for the tested process parameters. However, the composite with 5% DPLF shows nearly the same processability window as the neat PLA. The structural and mechanical characterizations of films suggest a reinforcing effect of the PLA matrix up to 2% of fiber (with an optimum at 1%). Larger DPLF loading leads to depressed and more anisotropic mechanical properties, related to an increased density of defects at the fiber-PLA fragile interface and to a DPLF-induced enhanced PLA thermal degradation and amorphous phase orientatio

Effects of residues on the degradation of PHA produced from mixed microbial cultures and processed in extrusion

Thermal degradation upon melting is one of the major drawbacks reported for polyhydroxyalkanoates (PHA). However, the role of residues originating from the fermentation and the extraction steps on the thermal stability of this class of biopolymers still needs to be clarified. In the particular case of PHA produced from mixed microbial cultures (MMC), this topic is even less documented in the literature. Here, two polyhydroxy(butyrate-co-valerate) (PHBV) produced from MMC enriched in PHA accumulating organisms and fed with cheese whey were studied. A micro extrusion line is used to produce filaments and assess the processability and the degradation of processed PHBV. The prototype micro extrusion line allows for studying grams of materials. The two PHBV contain 18 mol% HV. PHBV was recovered with 11 wt% residues, and further submitted to a purification procedure resulting in a second biopolyester containing less than 2 wt% impurities. The thermorheological characterization of the two PHBV is first presented, together with their semicrystalline properties. Then the processing windows of the two biopolyesters are presented. Finally, the properties of extruded filaments are reported and the thermomechanical degradation of PHBV is extensively studied. The structure was assessed by wide angle X-ray diffraction, mechanical and rheological properties are reported, thermal properties are studied with differential scanning calorimetry and thermogravimetric analysis, whereas Fourier Transform Infrared spectroscopy was used to assess the impact of the extrusion on PHBV chemical structure. All results obtained with the two PHBV are compared to assess the effects of residues on both PHBV processability and degradation

Rheo-optical characterization of liquid crystalline acetoxypropylcellulose melt undergoing large shear flow and relaxation after flow cessation

The rheological and structural characteristics of acetoxypropylcellulose (APC) nematic melt are studied at shear rates ranging from 10 s 1 to 1000 s 1 which are relevant to extrusion based processes. APC shows a monotonic shear thinning behavior over the range of shear rates tested. The negative extrudate-swell shows a minimum when a critical shear rate g_ c is reached. For shear rates smaller than g_ c, the flowinduced texture consists of two set of bands aligned parallel and normal to the flow direction. At shear rates larger than g_ c, the flow induced texture is reminiscent of a 2 fluids structure. Close to the shearing walls, domains elongated along the flow direction and stacked along the vorticity are imaged with POM, whereas SALS patterns indicate that the bulk of the sheared APC is made of elliptical domains oriented along the vorticity. No full nematic alignment is achieved at the largest shear rate tested. Below g_ c, the stress relaxation is described by a stretched exponential. Above g_ c, the stress relaxation is described by a fast and a slow process. The latter coincides with the growth of normal bands thicknesses, as the APC texture after flow cessation consists of two types of bands with parallel and normal orientations relative to the flow direction. Both bands thicknesses do not depend on the applied shear rate, in contrast to their orientation.This work was partially supported by the Portuguese Science and Technology Foundation through projects, PTDC/CTM/099595/2008, PTDC/CTM/101776/2008, PTDC/CTM-POL/1484/2012 and UID/CTM/500025/2013. S.N. Fernandes and J.P. Canejo acknowledge FCT for grants SFRH/BPD/78430/2011 and SFRH/BPD/101041/2014, respectively. Funding for project "Matepro e Optimizing Materials and Processes", with reference NORTE-07-0124-FEDER-000037 FEDER COMPETE, is also acknowledged

Assessment of piezoelectric sensors for the acquisition of steady melt pressures in polymer extrusion

Piezoelectric sensors have made their way into polymer processing and rheometry applications, in particular when small pressure changes with very fast dynamics are to be measured. However, no validation of their use for steady shear rheometry is available in the literature. Here, a rheological slit die was designed and constructed to allow for the direct comparison of pressure data measured with conventional and piezoelectric transducers. The calibration of piezoelectric sensors is presented together with a methodology to correct the data from the inherent signal drift, which is shown to be temperature and pressure independent. Flow curves are measured for polymers showing different levels of viscoelasticity. Piezoelectric slit rheometry is validated and its advantage for the rheology of thermodegradable materials with viscosity below 100 Pa·s is highlighted.This research was funded by National Funds through FCT—Portuguese Foundation for Science and Technology, Reference UID/CTM/50025/2013 and FEDER funds through the COMPETE 2020 Programme under the project number POCI-01-0145-FEDER 007688. L.H. acknowledges funding from the FCT Investigator Programme through grant IF/00606/2014.info:eu-repo/semantics/publishedVersio

Impact of composition and morphology on the optical properties of Si-NC/P3HT thin films processed from solution

Blends of Si nanocrystals (Si-NCs) and organic semiconductors are promising materials for new optical and electronic devices processed from solutions. Here, we study how the optical properties of composite films containing Si-NCs and the organic semiconductor poly(3-hexylthiophene) (P3HT) are influenced by the composition and morphology resulting from different solution-processing parameters and different solvents used dichlorobenzene vs. chloroform). The optical spectra of the hybrid films are described using a simple phenomenological model, with which we can discern the contribution of each material in the films to the optical properties. From this analysis, we obtain quantitative information about the composition and morphology of the hybrid nanostructured films, which otherwise would be obtained from more demanding microscopy and spectroscopy techniques. For the case of the Si-NC/P3HT blend, we find that in films deposited from dichlorobenzene solutions the Si-NCs contribute sizably to light absorption.This work was funded by FCT/I3N via the HybridSolar project, by the DFG via Teilprojekt B2 and by the European Union and the Ministry of Innovation, Science and Research of the German State of North Rhine-Westphalia in the framework of an Objective 2 Programme (European Regional Development Fund, ERDF). Funding is also acknowledged from the Portuguese Foundation for Science and Technology (FCT) through the Projects Nos. PTDC/FIS/112885/2009 and PEst-C/CTM/LA0025/2011 and via the Strategic Project LA 25:2011-2012

Gene expression profiling of Spodoptera frugiperda hemocytes and fat body using cDNA microarray reveals polydnavirus-associated variations in lepidopteran host genes transcript levels

BACKGROUND: Genomic approaches provide unique opportunities to study interactions of insects with their pathogens. We developed a cDNA microarray to analyze the gene transcription profile of the lepidopteran pest Spodoptera frugiperda in response to injection of the polydnavirus HdIV associated with the ichneumonid wasp Hyposoter didymator. Polydnaviruses are associated with parasitic ichneumonoid wasps and are required for their development within the lepidopteran host, in which they act as potent immunosuppressive pathogens. In this study, we analyzed transcriptional variations in the two main effectors of the insect immune response, the hemocytes and the fat body, after injection of filter-purified HdIV. RESULTS: Results show that 24 hours post-injection, about 4% of the 1750 arrayed host genes display changes in their transcript levels with a large proportion (76%) showing a decrease. As a comparison, in S. frugiperda fat body, after injection of the pathogenic JcDNV densovirus, 8 genes display significant changes in their transcript level. They differ from the 7 affected by HdIV and, as opposed to HdIV injection, are all up-regulated. Interestingly, several of the genes that are modulated by HdIV injection have been shown to be involved in lepidopteran innate immunity. Levels of transcripts related to calreticulin, prophenoloxidase-activating enzyme, immulectin-2 and a novel lepidopteran scavenger receptor are decreased in hemocytes of HdIV-injected caterpillars. This was confirmed by quantitative RT-PCR analysis but not observed after injection of heat-inactivated HdIV. Conversely, an increased level of transcripts was found for a galactose-binding lectin and, surprisingly, for the prophenoloxidase subunits. The results obtained suggest that HdIV injection affects transcript levels of genes encoding different components of the host immune response (non-self recognition, humoral and cellular responses). CONCLUSION: This analysis of the host-polydnavirus interactions by a microarray approach indicates that the presence of HdIV induces, directly or indirectly, variations in transcript levels of specific host genes, changes that could be responsible in part for the alterations observed in the parasitized host physiology. Development of such global approaches will allow a better understanding of the strategies employed by parasites to manipulate their host physiology, and will permit the identification of potential targets of the immunosuppressive polydnaviruses