Poly(lactic acid) blends with desired end-use properties by addition of thermoplastic polyester elastomer and MDI

The disadvantages of the poor mechanical properties of polylactic acid (PLA) limit its ability to be used in a wide number of applications. Melt blending of PLA and thermoplastic polyester elastomer (TPEE) has been performed in an effort to toughen the PLA without significant losses in modulus and ultimate tensile strength. In order to enhance the compatibility of PLA and TPEE, a diisocyanate compound was used as a reactive modifier. The thermal and mechanical properties, miscibility and phase morphologies of the blends were investigated. A blend of PLA and TPEE with a modifier does not lead to an important drop in tensile strength and modulus whereas the elongation at break is characterized by a significant increase (above 300%), compared with that of neat PLA and PLA/TPEE. The blends of PLA/TPEE/Modifier were found by thermal and fractured surface analysis to be an immiscible system with the addition of a modifier. However, the relative ductility of PLA/TPEE/Modifier is 34 times higher than that of neat PLA. The brittle fracture of neat PLA was transformed into a ductile fracture by the addition of a modifierclose111

In Vitro Biocompatibility and Antibacterial Efficacy of a Degradable Poly(l-lactide-co-epsilon-caprolactone) Copolymer Incorporated with Silver Nanoparticles

Silver nanoparticles (Ag-nps) are currently used as a natural biocide to prevent undesired bacterial growth in clothing, cosmetics and medical products. The objective of the study was to impart antibacterial properties through the incorporation of Ag-nps at increasing concentrations to electrospun degradable 50:50 poly(L-lactide-co-epsilon-caprolactone) scaffolds for skin tissue engineering applications. The biocompatibility of the scaffolds containing Ag-nps was evaluated with human epidermal keratinocytes (HEK); cell viability and proliferation were evaluated using Live/Dead and alamarBlue viability assays following 7 and 14 days of cell culture on the scaffolds. Significant decreases in cell viability and proliferation were noted for the 1.0 mg(Ag) g(scaffold)(−1) after 7 and 14 days on Ag-nps scaffolds. After 14 days, scanning electron microscopy revealed a confluent layer of HEK on the surface of the 0.0 and 0.1 mg(Ag) g(scaffold)(−1). Both 0.5 and 1.0 mg(Ag) g(scaffold)(−1) were capable of inhibiting both Gram positive and negative bacterial strains. Uniaxial tensile tests revealed a significant (p < 0.001) decrease in the modulus of elasticity following Ag-nps incorporation compared to control. These findings suggest that a scaffold containing between 0.5 and 1.0 mg(Ag) g(scaffold)(−1) is both biocompatible and antibacterial, and is suitable for skin tissue engineering graft scaffolds