Various Applications of ZnO Thin Films Obtained by Chemical Routes in the Last Decade

This review addresses the importance of Zn for obtaining multifunctional materials with interesting properties by following certain preparation strategies: choosing the appropriate synthesis route, doping and co-doping of ZnO films to achieve conductive oxide materials with p- or n-type conductivity, and finally adding polymers in the oxide systems for piezoelectricity enhancement. We mainly followed the results of studies of the last ten years through chemical routes, especially by sol-gel and hydrothermal synthesis. Zinc is an essential element that has a special importance for developing multifunctional materials with various applications. ZnO can be used for the deposition of thin films or for obtaining mixed layers by combining ZnO with other oxides (ZnO-SnO2, ZnO-CuO). Also, composite films can be achieved by mixing ZnO with polymers. It can be doped with metals (Li, Na, Mg, Al) or non-metals (B, N, P). Zn is easily incorporated in a matrix and therefore it can be used as a dopant for other oxidic materials, such as: ITO, CuO, BiFeO3, and NiO. ZnO can be very useful as a seed layer, for good adherence of the main layer to the substrate, generating nucleation sites for nanowires growth. Thanks to its interesting properties, ZnO is a material with multiple applications in various fields: sensing technology, piezoelectric devices, transparent conductive oxides, solar cells, and photoluminescence applications. Its versatility is the main message of this review

Advanced Nanostructured Coatings Based on Doped TiO₂ for Various Applications

For many years, TiO2-based materials and improving their properties in order to expand their application areas have been the focus of numerous research groups. Various innovative approaches have been proposed to improve the photocatalytic and gas-sensing properties of TiO2 nanostructures. In this review, we aim to synthesize the available information in the literature, paying special attention to the sol–gel technology, which is one of the most frequently used methods for TiO2 synthesis. The influence of dopants on the structural, morphological, optical, and electrical properties of TiO2 and the way to modify them in a controlled manner are briefly discussed. The role of shallow and/or deep energy levels within the TiO2 bandgap in the electron transport behavior of doped TiO2 is emphasized. Selected research on photocatalytic applications in water disinfection, wastewater treatment, and self-sterilizing coatings that contribute to improving the quality of human life and environmental preservation is highlighted. A survey of biosensors that are closely related to medical applications such as cancer detection, implantology, and osteogenesis is also provided. Finally, the pressing problems that need to be solved in view of the future development of TiO2-based nanostructures are listed

Evolution of Nanocrystalline Graphite’s Physical Properties during Film Formation

Nanocrystalline graphite (NCG) layers represent a good alternative to graphene for the development of various applications, using large area, complementary metal-oxide semiconductor (CMOS) compatible technologies. A comprehensive analysis of the physical properties of NCG layers—grown for different time periods via plasma-enhanced chemical vapour deposition (PECVD)—was conducted. The correlation between measured properties (thickness, optical constants, Raman response, electrical performance, and surface morphology) and growth time was established to further develop various functional structures. All thin films show an increased grain size and improved crystalline structure, with better electrical properties, as the plasma growth time is increased. Moreover, the spectroscopic ellipsometry investigations of their thickness and optical constants, together with the surface roughness extracted from the atomic force microscopy examinations and the electrical properties resulting from Hall measurements, point out the transition from nucleation to three-dimensional growth in the PECVD process around the five-minute mark

Synthesis of Zinc Oxide Nanomaterials via Sol-Gel Process with Anti-Corrosive Effect for Cu, Al and Zn Metallic Substrates

Nanosized zinc oxide (ZnO) particles modified with different silane coupling agents (octyltriethoxysilane (OTES), octadecyltriethoxysilane (ODTES) and (3-glycidyloxypropyl)trimethoxysilane (GPTMS)) were synthesized in basic catalysis using the sol-gel method. The structure and morphology were characterized by dynamic light scattering (DLS), environmental scanning electron microscopy (ESEM) and Fourier transform infrared spectroscopy (FTIR) for bonding characteristics. The final hybrid materials were deposited on three types of metallic substrates (aluminum (Al), copper (Cu) and zinc (Zn)) in order to obtain coatings with ultrahydrophobic and anti-corrosion properties. Water wettability was studied revealing a contact angle of 145° for the surface covered with ZnO material modified with ODTES. The water contact angle increased with the length of the alkyl chain supplied by the silica precursor. The anti-corrosive behavior of ZnO/silane coupling agents particles deposited on metallic substrates was studied by the linear polarization technique in neutral medium

Alkali Niobate Powder Synthesis Using an Emerging Microwave-Assisted Hydrothermal Method

For more than five decades, alkali niobate-based materials (KxNa1−xNbO3) have been one of the most promising lead-free piezoelectric materials researched to be used in electronics, photocatalysis, energy storage/conversion and medical applications, due to their important health and environmentally friendly nature. In this paper, our strategy was to synthetize the nearest reproductible composition to KxNa1−xNbO3 (KNN) with x = 0.5, placed at the limit of the morphotropic phase boundary (MPB) with the presence of both polymorphic phases, orthorhombic and tetragonal. The wet synthesis route was chosen to make the mix crystal powders, starting with the suspension preparation of Nb2O5 powder and KOH and NaOH alkaline solutions. Hydrothermal microwave-assisted maturation (HTMW), following the parameter variation T = 200–250 °C, p = 47–60 bar and dwelling time of 30–90 min, was performed. All powders therefore synthesized were entirely KxN1−xNbO3 solid solutions with x = 0.06–0.69, and the compositional, elemental, structural and morphological characterization highlighted polycrystalline particle assemblage with cubic and prismatic morphology, with sizes between 0.28 nm and 2.95 μm and polymorphic O-T phase coexistence, and a d33 piezoelectric constant under 1 pC/N of the compacted unsintered and unpoled discs were found

Biomimetic Sensitive Elements for 2,4,6-Trinitrotoluene Tested on Multi-Layered Sensors

In spite of technological progress, most of the current techniques for 2,4,6-trinitrotoluene (TNT) detection are time consuming due to laborious sensor preparation. Thereby, the aim of this work was to enlarge the knowledge for preparing sensitive elements for TNT with the aid of molecular imprinting; a known technique used to deliver biomimetic materials. The study first depicts the auto-assembly mechanism of (TNT) with functional diamino-silanes (i.e., N-(2-aminoethyl)-3-aminopropyl methyl dimethoxysilane), via “double” Meisenheimer complexes. This mechanism is being described herein for the first time and applied further to obtain molecularly imprinted polymer (MIP) films for TNT recognition. For testing the potential application of films as chemical sensor elements, typical rebinding assays of TNT in a liquid state and the rebinding of TNT in a vapor state, using multilayered sensor chips composed of quartz-chromium (Cr)-gold (Au)-titanium oxide (TiO2), were employed. Batch rebinding experiments have shown that thinner films were more efficient on retaining TNT molecules in the first five min, with a specificity of about 1.90. The quartz-Cr-Au-TiO2-MIP capacitive sensors, tested in vapor state, registered short response times (less than 25 s), low sensitivity to humidity and high specificity for TNT

Optical and Piezoelectric Properties of Mn-Doped ZnO Films Deposited by Sol-Gel and Hydrothermal Methods

Nowadays, multifunctional materials are of high interest due to their ability to be used in different applications by controlling one or two parameters (e.g., morphology and/or dopant). Zinc oxide is an intensive-studied material because of its large usability. Recently, we have shown that the conduction, transparency, and charge carrier concentration of ZnO can be controlled by changing the dopants, leading to promising materials as transparent conductive oxide films. In this work, sol-gel (SG) and hydrothermal (HT) methods were used separately or in combination in order to obtain ZnO films doped with Mn (1, 2, and 5%) for possible application in transparent optoelectronics or as piezoelectric materials. The manganese (Mn) dopant in the form of anhydrous manganese acetate was used to obtain Mn-doped ZnO films. ZnO hydrothermal (HT) growth was made on a previously ZnO seed layer, formed by sol-gel method. The Mn-doped ZnO films were deposited on microscope glass and on Pt/Ti/SiO2/Si substrates. A comparative characterization of the films for their structure, morphology, and optical and piezoelectric properties was achieved. SG films exhibit equiaxed nanoparticles, with diameters around 50 nm, while the films prepared by HT show a homogeneous morphology consisting of uniform 1D nanorods, sized about 30 nm diameter and 200–300 nm length. XRD diffractograms evidenced the presence of zincite phase (wurtzite structure hexagonally close packed), with an improvement in crystallinity of the HT films (compared with SG ones), which present a stronger tendency to be oriented along (002) plane (c-axis) at 2% at Mn. Spectroscopic ellipsometry shows that the films obtained by SG are much thinner than the ones obtained by HT and that the refractive index is increasing with the percent of dopant. The band gap energy was found to decrease with the Mn doping level from 3.28 eV (undoped ZnO) to 3.10 eV (ZnO doped with 5 at% Mn) for the samples deposited on Pt/Ti/SiO2/Si. The maximum transmission is found for the undoped ZnO film and decreases with Mn concentration but remains over 78% in the visible range. From the piezoelectric tests, it was found that the d33 coefficient is much larger for the HT samples in comparison with the SG samples, especially for 2 and 5 at% Mn. The optical and piezoelectric results could be of interest for applications in optoelectronic or piezoelectric devices

Effect of Modified Silica Materials on Polyvinyl Chloride (PVC) Substrates to Obtain Transparent and Hydrophobic Hybrid Coatings

In this research, we report a simple and inexpensive way to prepare transparent and hydrophobic hybrid coatings through deposition of different silica materials on polyvinyl chloride (PVC) substrates. The silica materials were prepared using an acid-catalyzed sol–gel method at room temperature (25 ± 2 °C), using alkoxysilanes: tetraethoxysilane (TEOS), as the silica source, and ethoxydimethylvinylsilane (DMVES), triethoxyoctylsilane (OTES), and trimethoxyhexadecylsilane (HDTMES), as modifier agents. The obtained materials were characterized (either as powders or as thin films) by Fourier-transform infrared spectroscopy (FTIR), UV/Vis spectroscopy, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), atomic force microscopy (AFM), spectroscopic ellipsometry (SE), and water contact-angle measurements. UV/Vis spectra showed that the PVC substrate coated with the silica material containing TEOS/DMVES/OTES had a transmittance of about 90% in the wavelength range of 650–780 nm. The water contact angles increased from 83° for uncoated PVC substrate to ~94° for PVC substrates coated with the sol–gel silica materials. These PVC films with hybrid silica coatings can be used as the materials for outdoor applications, such as energy-generating solar panel window blinds or PVC clear Windmaster outdoor blinds