Carbon Trading with Blockchain

Blockchain has the potential to accelerate the deployment of emissions trading systems (ETS) worldwide and improve upon the efficiency of existing systems. In this paper, we present a model for a permissioned blockchain implementation based on the successful European Union (EU) ETS and discuss its potential advantages over existing technology. We propose an ETS model that is both backwards compatible and future-proof, characterised by interconnectedness, transparency, tamper-resistance and high liquidity. Further, we identify key challenges to implementation of a blockchain ETS, as well as areas of future work required to enable a fully-decentralised blockchain ETS

The wing coupling apparatus and the morphometric analysis of honeybee populations

Significant differences between countries were found in the distribution of the number of hamuli within Apis andreniformis, A. florea, A. cerana and A. koschevnikovi. The mean hamuli numbers for Apis mellifera intermissa differed significantly among localities in Algeria. Significant differences in intercolonial variability between countries were found within A. cerana. There was no significant infraspecific variability within A. andreniformis, A. florea, A. koschevnikovi and A. m. intermissa. Significant differences in the mean number of hamuli occur between A. m. intermissa and A. andreniformis, A. florea and A. cerana; also between A. cerana/A. koschevnikovi and A. andreniformis and A. florea. Significant differences were found in the distribution and variability of the number of hamuli between species (populations). The mean numbers of hamuli for A. andreniformis differed from those of A. florea. Both these population means differed from those of A. cerana, A. koschevnikovi and A. m. intermissa. No significant differences were found between A. cerana and A. koschevnikovi. When the analysis included data for A. dorsata, A. nigrocincta, A. m. carnica, A. m. caucasica and A. m. ligustica, the results showed significant differences in hamuli numbers between A. andreniformis/A. florea and A. cerana/A. koschevnikovi/A. nigrocincta and A. m. intermissa/A. m. carnica/A. m. caucasica/A. m. ligustica. Hamuli numbers in A. dorsata significantly differed from those of other populations except A. m. intermissa. These results show that hamuli numbers are useful in the classification of honeybee populations. Whether hamuli would be useful in multivariate analysis depends on the correlation between the number of hamuli and the other characters used

The Nature of the Arbitration Process

The process of reaching a decision in labor-management arbitrations involves many uncertain factors. As to the final result in a case, we can perhaps say that it is in accord with the contract of the parties or that it is not; that it is fair or not; practical or unworkable; or that it accords with public policy or violates it. Some or all of the criteria discussed in this article may be satisfied in a particular case, but, as is proper, the parties are most often interested in basic equities, in whether an award can be brought within the ambit of their contract, and whether it will work in their daily relationships. But, all these considered, thousands of awards attest that, when the parties believe the arbitrator has understood the facts and the contract, and reached a decision that is logical and practical they will accept it without complaint. Few realize fully, however, how often a decision must be based on somewhat incomplete information, and the difficulty the arbitrator has in satisfying himself that the award is correct beyond all doubt

Millimeter Wave Holographical Inspection of Honeycomb Composites

Multi-layered composite structures manufactured with honeycomb, foam or balsa wood cores are finding increasing utility in a variety of aerospace, transportation, and infrastructure applications. Due to the low conductivity and inhomogeneity associated with these composites standard nondestructive testing (NDT) methods are not always capable of inspecting their interior for various defects caused during the manufacturing process or as a result of in-service loading. On the contrary, microwave and millimeter wave NDT methods are well-suited for inspecting these structures since signals at these frequencies readily penetrate through these structures and reflect from different interior boundaries revealing the presence of a wide range of defects such as disbond, delamination, moisture and oil intrusion, impact damage, etc. Millimeter wave frequency spectrum spans 30 GHz - 300 GHz with corresponding wavelengths of 10 - 1 mm. Due to the inherent short wavelengths at these frequencies, one can produce high spatial resolution images of these composites either using real-antenna focused or synthetic-aperture focused methods. In addition, incorporation of swept-frequency in the latter method (i.e., holography) results in high-resolution three-dimensional images. This paper presents the basic steps behind producing such images at millimeter wave frequencies and the results of two honeycomb composite panels are demonstrated at Q-band (33-50 GHz). In addition, these results are compared to previous results using X-ray computed tomography

Sources of and Remedies for Removing Unwanted Reflections in Millimeter Wave Images of Complex SOFI-Covered Space Shuttle Structures

In the recent years, continuous-wave near-field and lens-focused millimeter wave imaging systems have been effectively used to demonstrate their utility for producing high-resolution images of metallic structures covered with spay on foam insulation (SOFI) such as the Space Shuttle external fuel tank. However, for some specific structures a certain interference -pattern may be superimposed on the produced images. There are methods by which the influence of this unwanted interference can be reduced, such as the incorporation of an incidence .angle and the proper use of signal polarization. This paper presents the basics of this problem and describes the use of the methods for reducing this unwanted influence through specific examples

Comparison of Focused and Near-Field Imaging of Spray on Foam Insulation (SOFI) at Millimeter Wave Frequencies

Millimeter wave imaging techniques can provide high spatial-resolution images of various composites. Lens antennas may be incorporated into the imaging system to provide a small incident beam footprint. Another approach may involve the use of horn antennas, which if operating in their near-fields, images with reasonably high spatial-resolutions may also be obtained. This paper gives a comparison between such near-field and focused far-field imaging of the Space Shuttle Spray on Foam Insulation (SOFI) used in its external fuel tank at millimeter wave frequencies. Small horn antennas and lens antennas with relatively long depth of focus were used in this investigation

Microwave and Millimeter Wave Testing for the Inspection of the Space Shuttle Spray on Foam Insulations (SOFI) and the Acreage Heat Tiles

The utility of microwave and millimeter wave nondestructive testing and evaluation (NDT&E) methods, for testing the Space Shuttle's external he1 tank spray on foam insulation (SOFI) and the acreage heat tiles has been investigated during the past two years. Millimeter wave NDE techniques are capable of producing internal images of SOFI. This paper presents the results of testing several diverse panels with embedded voids and debonds at millimeter wave frequencies. Additionally, the results of testing a set of heat tiles are also presented. Finally, the attributes of these methods as well as the advantageous features associated with these systems are also provided