Joint Beamforming and Phase Shift Design for Hybrid-IRS-aided Directional Modulation Network

To make a good balance between performance, cost, and power consumption, a hybrid intelligent reflecting surface (IRS)-aided directional modulation (DM) network is investigated in this paper, where the hybrid IRS consists of passive and active reflecting elements. To maximize the achievable rate, two optimization algorithms, called maximum signal-to-noise ratio (SNR)-fractional programming (FP) (Max-SNR-FP) and maximum SNR-equal amplitude reflecting (EAR) (Max-SNR-EAR), are proposed to jointly design the beamforming vector and phase shift matrix (PSM) of hybrid IRS by alternately optimizing one and giving another. The former employs the successive convex approximation and FP methods to derive the beamforming vector and hybrid IRS PSM, while the latter adopts the maximum signal-to-leakage-noise ratio method and the criteria of phase alignment and EAR to design them. Simulation results show that the rates harvested by the proposed two methods are slightly lower than those of active IRS with higher power consumption, which are 35 percent higher than those of no IRS and random phase IRS, while passive IRS achieves only about 17 percent rate gain over the latter. Moreover, compared to Max-SNR-FP, the proposed Max-SNR-EAR method makes an obvious complexity degradation at the price of a slight performance loss

Joint Beamforming and Phase Shift Design for Hybrid IRS and UAV-Aided Directional Modulation Networks

Recently, intelligent reflecting surfaces (IRSs) and unmanned aerial vehicles (UAVs) have been integrated into wireless communication systems to enhance the performance of air–ground transmission. To balance performance, cost, and power consumption well, a hybrid IRS and UAV-assisted directional modulation (DM) network is investigated in this paper in which the hybrid IRS consisted of passive and active reflecting elements. We aimed to maximize the achievable rate by jointly designing the beamforming and phase shift matrix (PSM) of the hybrid IRS subject to the power and unit-modulus constraints of passive IRS phase shifts. To solve the non-convex optimization problem, a high-performance scheme based on successive convex approximation and fractional programming (FP) called the maximal signal-to-noise ratio (SNR)-FP (Max-SNR-FP) is proposed. Given its high complexity, we propose a low-complexity maximal SNR-equal amplitude reflecting (EAR) (Max-SNR-EAR) scheme based on the maximal signal-to-leakage-noise ratio method, and the criteria of phase alignment and EAR. Given that the active and passive IRS phase shift matrices of both schemes are optimized separately, to investigate the effect of jointly optimizing them to improve the achievable rate, a maximal SNR majorization-minimization (MM) (Max-SNR-MM) scheme using the MM criterion to design the IRS PSM is proposed. Simulation results show that the rates harvested by the three proposed methods were slightly lower than those of the active IRS with higher power consumption, which were 35% higher than those of no IRS and random phase IRS, while passive IRS achieved only about a 17% rate gain over the latter. Moreover, compared with the Max-SNR-FP, the proposed Max-SNR-EAR and Max-SNR-MM methods caused obvious complexity degradation at the price of slight performance loss

Sandwich-like Catalyst-Carbon-Catalyst Trilayer Structure as a Compact 2D Host for Highly Stable Lithium-Sulfur Batteries

Herein, we propose the construction of a sandwich-structured host filled with continuous 2D catalysis-conduction interfaces. This MoN-C-MoN trilayer architecture causes the strong conformal adsorption of S/Li2Sx and its high-efficiency conversion on the two-sided nitride polar surfaces, which are supplied with high-flux electron transfer from the buried carbon interlayer. The 3D self-assembly of these 2D sandwich structures further reinforces the interconnection of conductive and catalytic networks. The maximized exposure of adsorptive/catalytic planes endows the MoN-C@S electrode with excellent cycling stability and high rate performance even under high S loading and low host surface area. The high conductivity of this trilayer texture does not compromise the capacity retention after the S content is increased. Such a job-synergistic mode between catalytic and conductive functions guarantees the homogeneous deposition of S/Li2Sx, and avoids thick and devitalized accumulation (electrode passivation) even after high-rate and long-term cycling

Changes in Physicochemical Properties, Metabolites and Antioxidant Activity of Edible Grass during Spontaneous Fermentation

Fermentation is a crucial technology to improve the nutritional and functional properties of food materials. In this study, edible grass was processed by spontaneous fermentation. Changes in physicochemical properties, metabolites, and antioxidant activity of edible grass were investigated by colorimetric method and chromatography mass spectrometry-based non-targeted metabolomics approach during fermentation. The highest total polyphenol and total flavonoid contents, and free radical scavenging abilities were observed on the 17th day of fermentation. The maximum activity of superoxide dismutase was maintained stable in the fermentation time range of 7–70 days. In total, 16 differential metabolites were identified with fermentation duration up to 124 days. Fermented edible grass exerted protection from H2O2-induced cytotoxicity on HepG2 cells, regulating by the reduction in reactive oxygen species level and the increase in antioxidant enzyme activities. Overall, this study confirms that fermented edible grass obtained by spontaneous fermentation presented favorable nutritional and functional quality, and is expected to be a kind of food with antioxidant function

Physical Layer Security Techniques for Data Transmission for Future Wireless Networks

The broadcast nature of wireless communication systems makes wireless transmission extremely susceptible to eavesdropping and even malicious interference. Physical layer security technology can effectively protect the private information sent by the transmitter from being listened to by illegal eavesdroppers, thus ensuring the privacy and security of communication between the transmitter and legitimate users. Thus, the main design goal of physical layer security is to increase the performance difference between the link of the legitimate receiver and that of the eavesdropper by using well-designed transmission schemes. The development of mobile communication presents new challenges to physical layer security research. This paper provides a survey of the physical layer security research on various promising mobile technologies from secure key generation and keyless technique, including secure key generation, directional modulation (DM), spatial modulation (SM), covert communication, intelligent reflecting surface (IRS)-aided communication, and so on. Finally, future trends and the unresolved technical challenges are presented in physical layer security for mobile communications