Novel freeze-drying methods to produce a range of collagen-glycosaminoglycan scaffolds with tailored mean pore sizes.

The pore structure of three-dimensional scaffolds used in tissue engineering has been shown to significantly influence cellular activity. As the optimal pore size is dependant on the specifics of the tissue engineering application, the ability to alter the pore size over a wide range is essential for a particular scaffold to be suitable for multiple applications. With this in mind, the aim of this study was to develop methodologies to produce a range of collagen-glycosaminoglycan (CG) scaffolds with tailored mean pore sizes. The pore size of CG scaffolds is established during the freeze-drying fabrication process. In this study, freezing temperature was varied (−10 degrees C to −70 degrees C) and an annealing step was introduced to the process to determine their effects on pore size. Annealing is an additional step in the freeze-drying cycle that involves raising the temperature of the frozen suspension to increase the rate of ice crystal growth. The results show that the pore size of the scaffolds decreased as the freezing temperature was reduced. Additionally, the introduction of an annealing step during freeze-drying was found to result in a significant increase (40%) in pore size. Taken together, these results demonstrate that the methodologies developed in this study can be used to produce a range of CG scaffolds with mean pore sizes from 85 to 325 microm. This is a substantial improvement on the range of pore sizes that were possible to produce previously (96-150 microm). The methods developed in this study provide a basis for the investigation of the effects of pore size on both in vitro and in vivo performance and for the determination of the optimal pore structure for specific tissue engineering applications

The effect of dehydrothermal treatment on the mechanical and structural properties of collagen-GAG scaffolds.

The mechanical properties of tissue engineering scaffolds are critical for preserving the structural integrity and functionality during both in vivo implantation and long-term performance. In addition, the mechanical and structural properties of the scaffold can direct cellular activity within a tissue-engineered construct. In this context, the aim of this study was to investigate the effects of dehydrothermal (DHT) treatment on the mechanical and structural properties of collagen-glycosaminoglycan (CG) scaffolds. Temperature (105-180 degrees C) and exposure period (24-120 h) of DHT treatment were varied to determine their effect on the mechanical properties, crosslinking density, and denaturation of CG scaffolds. As expected, increasing the temperature and duration of DHT treatment resulted in an increase in the mechanical properties. Compressive properties increased up to twofold, while tensile properties increased up to 3.8-fold. Crosslink density was found to increase with DHT temperature but not exposure period. Denaturation also increased with DHT temperature and exposure period, ranging from 25% to 60% denaturation. Crosslink density was found to be correlated with compressive modulus, whilst denaturation was found to correlate with tensile modulus. Taken together, these results indicate that DHT treatment is a viable technique for altering the mechanical properties of CG scaffolds. The enhanced mechanical properties of DHT-treated CG scaffolds improve their suitability for use both in vitro and in vivo. In addition, this work facilitates the investigation of the effects of mechanical properties and denaturation on cell activity in a 3D environment

Crosslinking and Mechanical Properties Significantly Influence Cell Attachment, Proliferation, and Migration Within Collagen Glycosaminoglycan Scaffolds.

Crosslinking and the resultant changes in mechanical properties have been shown to influence cellular activity within collagen biomaterials. With this in mind, we sought to determine the effects of crosslinking on both the compressive modulus of collagen-glycosaminoglycan scaffolds and the activity of osteoblasts seeded within them. Dehydrothermal, 1-ethyl-3-3-dimethyl aminopropyl carbodiimide and glutaraldehyde crosslinking treatments were first investigated for their effect on the compressive modulus of the scaffolds. After this, the most promising treatments were used to study the effects of crosslinking on cellular attachment, proliferation, and infiltration. Our experiments have demonstrated that a wide range of scaffold compressive moduli can be attained by varying the parameters of the crosslinking treatments. 1-Ethyl-3-3-dimethyl aminopropyl carbodiimide and glutaraldehyde treatments produced the stiffest scaffolds (fourfold increase when compared to dehydrothermal crosslinking). When cells were seeded onto the scaffolds, the stiffest scaffolds also showed increased cell number and enhanced cellular distribution when compared to the other groups. Taken together, these results indicate that crosslinking can be used to produce collagen-glycosaminoglycan scaffolds with a range of compressive moduli, and that increased stiffness enhances cellular activity within the scaffolds

The effects of collagen concentration and crosslink density on the biological, structural and mechanical properties of collagen-GAG scaffolds for bone tissue engineering.

In this study, we examined the effects of varying collagen concentration and crosslink density on the biological, structural and mechanical properties of collagen-GAG scaffolds for bone tissue engineering. Three different collagen contents (0.25%, 0.5% and 1% collagen) and two different dehydrothermal (DHT) crosslinking processes [1] 105 degrees C for 24 h and [2] 150 degrees C for 48 h were investigated. These scaffolds were assessed for (1) pore size, (2) permeability (3) compressive strength and (4) cell viability. The largest pore size, permeability rate, compressive modulus, cell number and cell metabolic activity was all found to occur on the 1% collagen scaffold due to its increased collagen composition and the DHT treatment at 150 degrees C was found to significantly improve the mechanical properties and not to affect cellular number or metabolic activity. These results indicate that doubling the collagen content to 1% and dehydrothermally crosslinking the scaffold at 150 degrees C for 48 h has enhanced mechanical and biological properties of the scaffold making it highly attractive for use in bone tissue engineering

Temporal and spatial changes in cartilage-matrix-specific gene expression in mesenchymal stem cells in response to dynamic compression.

Various forms of mechanical stimulation have been shown to enhance chondrogenesis of mesenchymal stem cells (MSCs). However, the response of MSCs undergoing chondrogenesis to such signals has been shown to depend on the temporal application of loading. The objective of this study was to determine the effect of dynamic compression on cartilage-matrix-specific gene expression and to relate this response to the local biochemical environment and cell phenotype at the time of loading. At 0, 7, 14, and 21 days extracellular matrix (ECM) deposition within MSC-seeded agarose hydrogels due to transforming growth factor-β3 stimulation was determined biochemically and histologically, and then reverse transcription-polymerase chain reaction was used to examine the effects of dynamic compression on cartilage-matrix-specific gene expression. The results of these experiments show that the local environment in the core of the constructs is more favorable for chondrogenesis in comparison to the annulus, as evident from both ECM synthesis and gene expression. Additionally, we found that the response of the cells to mechanical stimulus varied with both the spatial region within the constructs and the temporal application of loading. Dynamic compression applied at day 21 was found to enhance levels of cartilage matrix gene expression following a peak in expression levels at day 14 in free swelling constructs, suggesting that mechanical signals play a key role in the maintenance of a chondrogenic phenotype. The application of mechanical stimulus to enhance cartilage ECM synthesis may be an important tool in regenerative medicine-based cartilage repair. The results of this study suggest that a chondrogenic phenotype and/or a well-developed pericellular matrix must first be established before dynamic compression can have a positive effect on cartilage-matrix-specific gene expression

Gene expression by marrow stromal cells in a porous collagen-glycosaminoglycan scaffold is affected by pore size and mechanical stimulation.

Marrow stromal cell (MSC) populations, which are a potential source of undifferentiated mesenchymal cells, and culture scaffolds that mimic natural extracellular matrix are attractive options for orthopaedic tissue engineering. A type I collagen-glycosaminoglycan (CG) scaffold that has previously been used clinically for skin regeneration was recently shown to support expression of bone-associated proteins and mineralisation by MSCs cultured in the presence of osteogenic supplements. Here we follow RNA markers of osteogenic differentiation in this scaffold. We demonstrate that transcripts of the late stage markers bone sialoprotein and osteocalcin are present at higher levels in scaffold constructs than in two-dimensional culture, and that considerable gene induction can occur in this scaffold even in the absence of soluble osteogenic supplements. We also find that bone-related gene expression is affected by pore size, mechanical constraint, and uniaxial cyclic strain of the CG scaffold. The data presented here further establish the CG scaffold as a potentially valuable substrate for orthopaedic tissue engineering and for research on the mechanical interactions between cells and their environment, and suggest that a more freely-contracting scaffold with larger pore size may provide an environment more conducive to osteogenesis than constrained scaffolds with smaller pore sizes

Stochastic Delay Accelerates Signaling in Gene Networks

The creation of protein from DNA is a dynamic process consisting of numerous reactions, such as transcription, translation and protein folding. Each of these reactions is further comprised of hundreds or thousands of sub-steps that must be completed before a protein is fully mature. Consequently, the time it takes to create a single protein depends on the number of steps in the reaction chain and the nature of each step. One way to account for these reactions in models of gene regulatory networks is to incorporate dynamical delay. However, the stochastic nature of the reactions necessary to produce protein leads to a waiting time that is randomly distributed. Here, we use queueing theory to examine the effects of such distributed delay on the propagation of information through transcriptionally regulated genetic networks. In an analytically tractable model we find that increasing the randomness in protein production delay can increase signaling speed in transcriptional networks. The effect is confirmed in stochastic simulations, and we demonstrate its impact in several common transcriptional motifs. In particular, we show that in feedforward loops signaling time and magnitude are significantly affected by distributed delay. In addition, delay has previously been shown to cause stable oscillations in circuits with negative feedback. We show that the period and the amplitude of the oscillations monotonically decrease as the variability of the delay time increases

Towards a Muon Collider

A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work.Comment: 118 pages, 103 figure

Towards a muon collider

A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work