Wire core reactor for NTP

The development of the wire core system for Nuclear Thermal Propulsion (NTP) that took place from 1963 to 1965 is discussed. A wire core consists of a fuel wire with spacer wires. It's an annular flow core having a central control rod. There are actually four of these, with beryllium solid reflectors on both ends and all the way around. Much of the information on the concept is given in viewgraph form. Viewgraphs are presented on design details of the wire core, the engine design, engine weight vs. thrust, a technique used to fabricate the wire fuel element, and axial temperature distribution

Common Ingredient Profiles of Multi-Ingredient Pre-Workout Supplements

Multi-ingredient pre-workout supplements are a popular class of dietary supplements which are purported to improve exercise performance. However, the composition of these products varies substantially between formulations, thus making comparisons challenging. Therefore, the purpose of this study was to identify a common ingredient profile of top-selling pre-workout supplements and to compare ingredient dosages to established efficacious values. The top 100 commercially available pre-workout products were analyzed for listed ingredients and amounts, if available, from the supplement facts panel. The mean ± SD number of ingredients per supplement (n = 100) was 18.4 ± 9.7 with 8.1 ± 9.9 of these ingredients included in a proprietary blend at undisclosed quantities. Relative prevalence and average amounts of the top ingredients amounted to: Beta-alanine (87%; 2.0 ± 0.8 g), Caffeine (86%; 254.0 ± 79.5 mg), Citrulline (71%; 4.0 ± 2.5 g), Tyrosine (63%; 348.0 ± 305.7 mg), Taurine (51%; 1.3 ± 0.6 g), and Creatine (49%; 2.1 ± 1.0 g). Nearly half (44.3%) of all ingredients were included as part of a proprietary blend with undisclosed amounts of each ingredient. The average amount of beta-alanine per serving size was below the recommended efficacious dose. The average caffeine content was near the low end for an effective relative dose for a 70 kg individual (3–6 mg·kg−1 of bodyweight)

Common Habits, Adverse Events, and Opinions Regarding Pre-Workout Supplement Use Among Regular Consumers

The purpose of the present study was to examine characteristics of multi-ingredient pre-workout supplement (MIPS) users, their common patterns/habits of MIPS ingestion, and their associated feelings about the effectiveness and safety of this class of supplements. An online electronic survey was distributed through social media to assess self-reported supplementation practices and preferences among adult males and females who reported regular MIPS use. A total of 1045 individuals responded, with 872 of these individuals (males: n = 636, 72.9%; females: n = 233, 26.7%; mean ± SD; age = 27.7 ± 7.9 years; training age = 8.2 ± 7.3 years) completing the survey. The majority of respondents reported the length of current or past MIPS consumption as greater than one year (n = 630, 72.2%), with ingestion frequencies primarily of four (n = 210, 24.1%) or five (n = 212, 24.3%) days per week of training. In addition, the three most popular goals for ingesting MIPS were increased energy and focus (n = 776, 89.0%), muscular endurance (n = 325, 37.3%), and blood flow or “pump” (n = 322, 37.0%). Although most users reported ingesting one serving size with each use, 14% reported ingesting two or more, and 18% indicated they ingest MIPS more than once per day. Importantly, over half (54%) of the respondents reported experiencing side-effects following MIPS use, including skin reactions, heart abnormalities, and nausea. Females were more likely than males to experience these side effects, despite being less likely to consume two or more serving sizes per dose. Our findings also indicated that MIPS users should consume no more than the recommended serving size of a given supplement, as the potentially significant variability in the caffeine content of MIPS products is compounded as more doses are consumed. Furthermore, MIPS users should minimize the ingestion of other supplements which contain high levels of niacin and caffeine, as the concurrent consumption of such products may put users above the tolerable upper limits for these substances

Gpr126/Adgrg6 has Schwann cell autonomous and nonautonomous functions in peripheral nerve injury and repair

Schwann cells (SCs) are essential for proper peripheral nerve development and repair, although the mechanisms regulating these processes are incompletely understood. We previously showed that the adhesion G protein-coupled receptor Gpr126/Adgrg6 is essential for SC development and myelination. Interestingly, the expression of Gpr126 is maintained in adult SCs, suggestive of a function in the mature nerve. We therefore investigated the role of Gpr126 in nerve repair by studying an inducible SC-specific Gpr126 knock-out mouse model. Here, we show that remyelination is severely delayed after nerve-crush injury. Moreover, we also observe noncell-autonomous defects in macrophage recruitment and axon regeneration in injured nerves following loss of Gpr126 in SCs. This work demonstrates that Gpr126 has critical SC-autonomous and SC-nonautonomous functions in remyelination and peripheral nerve repair. SIGNIFICANCE STATEMENT Lack of robust remyelination represents one of the major barriers to recovery of neurological functions in disease or following injury in many disorders of the nervous system. Here we show that the adhesion class G protein-coupled receptor (GPCR) Gpr126/Adgrg6 is required for remyelination, macrophage recruitment, and axon regeneration following nerve injury. At least 30% of all approved drugs target GPCRs; thus, Gpr126 represents an attractive potential target to stimulate repair in myelin disease or following nerve injury

A Pilot Study to Examine the Impact of Beta-Alanine Supplementation on Anaerobic Exercise Performance in Collegiate Rugby Athletes

Beta-alanine (BA) is a precursor to carnosine which functions as a buffer assisting in the maintenance of intracellular pH during high-intensity efforts. Rugby is a sport characterized by multiple intermittent periods of maximal or near maximal efforts with short periods of rest/active recovery. The purpose of this pilot study was to evaluate the impact of six weeks of beta-alanine supplementation on anaerobic performance measures in collegiate rugby players. Twenty-one male, collegiate rugby players were recruited, while fifteen completed post-testing (Mean ± SD; Age: 21.0 ± 1.8 years, Height: 179 ± 6.3 cm, Body Mass: 91.8 ± 13.3 kg, % Body Fat: 21.3 ± 4.4). Supplementation was randomized in a double-blind, placebo-controlled manner between 6.4 g/d of beta-alanine and 6.4 g/d of maltodextrin placebo. Body composition, upper and lower-body maximal strength and muscular endurance, intermittent sprint performance, and post-exercise lactate, heart rate, and rating of perceived exertion were assessed before and after supplementation. Data were analyzed using a 2 × 2 (group × time) mixed factorial analysis of variance (ANOVA) with repeated measures on time. No significant interaction effects were noted for body mass, fat mass, fat-free mass, and percent bodyfat (p \u3e 0.05). No performance effects resulting from beta-alanine supplementation were detected. Results from this initial pilot investigation suggest that BA exerts little to no impact on body composition parameters, muscular strength, muscular endurance, or intermittent sprinting performance. With the limited research exploring the impact of BA in this sporting context, these initial findings offer little support for BA use, but more research is needed to fully understand the potential impact of BA on various aspects of resistance exercise performance

Whole genome sequencing-based mapping and candidate identification of mutations from fixed zebrafish tissue

As forward genetic screens in zebrafish become more common, the number of mutants that cannot be identified by gross morphology or through transgenic approaches, such as many nervous system defects, has also increased. Screening for these difficult-to-visualize phenotypes demands techniques such as whole-mount in situ hybridization (WISH) or antibody staining, which require tissue fixation. To date, fixed tissue has not been amenable for generating libraries for whole genome sequencing (WGS). Here, we describe a method for using genomic DNA from fixed tissue and a bioinformatics suite for WGS-based mapping of zebrafish mutants. We tested our protocol using two known zebrafish mutant alleles, gpr126st49 and egr2bfh227, both of which cause myelin defects. As further proof of concept we mapped a novel mutation, stl64, identified in a zebrafish WISH screen for myelination defects. We linked stl64 to chromosome 1 and identified a candidate nonsense mutation in the F-box and WD repeat domain containing 7 (fbxw7) gene. Importantly, stl64 mutants phenocopy previously described fbxw7vu56 mutants, and knockdown of fbxw7 in wild-type animals produced similar defects, demonstrating that stl64 disrupts fbxw7. Together, these data show that our mapping protocol can map and identify causative lesions in mutant screens that require tissue fixation for phenotypic analysis

Association of Researchers in Construction Management

The purported benefits of Building Information Modelling (BIM) have resulted in its widespread advocacy across the industry. However, the realities of its implementation are often misunderstood and overlooked. BIM is a complex and unbounded technology, therefore trying to apply it to a project without consideration of the associated organisational changes is likely to end in failure or lower than predicted returns. Factors such as professional development and technical support, the technology learning curve, positive and negative feelings towards the technology, and strategy effectiveness can all help and hinder implementation. This paper draws on a set of interviews with members of a BIM implementation board within a large multifaceted construction company. The purpose of the interviews was to establish the 'as-is' position of the organisation in terms of BIM use, focussing on current practices and cases studies of previous and on-going projects and their utilisation of both BIM processes and sustainable design activities. However, thematic analysis highlighted significant barriers to the successful implementation of BIM within the organisation: lack of top-level support, misunderstanding across the organisation over BIM capabilities, regional differences in implementation support, and a predominant focus on the bottom-line preventing effective resource allocation. It is therefore argued that the organisational context and conditions of technology, process, and actor interaction are a necessary precursor to successful BIM implementation and should be taken into account when assessing performance on a BIM-enabled project, in order to comprehensively inform and support change management initiatives