69,591 research outputs found
An evaluation of the effects of stacking sequence and thickness on the fatigue life of quasi-isotropic graphite/epoxy laminates
Notched and unnotched geometries at 16, 32, and 64-ply thicknesses of a 90/45/0-45 (ns) laminate and a 45/0/-45/90 (ns) laminate were tested in compression-compression fatigue. The fatigue life and the initiation, type, and progression of damage were determined. Interlaminar stresses generated at straight, free edges of axially loaded laminates were used to interpret the test results. The fatigue lives of the notched specimens did not appear to be a strong function of laminate stacking sequence or specimen thickness. The stress concentration at the hole dominated over the interlaminar stresses at the straight free edge. The unnotched specimens of the 90/45/0/-45 (ns) laminate with tensile interlaminar normal stresses delaminated more readily than did the 45/0/-45/90 (ns) laminate with compressive interlaminar normal stress. The life of the 16-ply unnotched specimens was lower than the 32- and 64-ply specimens. Delaminations were located at the interface where the maximum shear stress occurred regardless of the sense or magnitude of the interlaminar normal stress. An antibuckling fixture was effective in preventing out-of-plane motion without overconstraining the specimen
A conflict analysis of 4D descent strategies in a metered, multiple-arrival route environment
A conflict analysis was performed on multiple arrival traffic at a typical metered airport. The Flow Management Evaluation Model (FMEM) was used to simulate arrival operations using Denver Stapleton's arrival route structure. Sensitivities of conflict performance to three different 4-D descent strategies (clear-idle Mach/Constant AirSpeed (CAS), constant descent angle Mach/CAS and energy optimal) were examined for three traffic mixes represented by those found at Denver Stapleton, John F. Kennedy and typical en route metering (ERM) airports. The Monte Carlo technique was used to generate simulation entry point times. Analysis results indicate that the clean-idle descent strategy offers the best compromise in overall performance. Performance measures primarily include susceptibility to conflict and conflict severity. Fuel usage performance is extrapolated from previous descent strategy studies
Fracture behavior of thick, laminated graphite/epoxy composites
The effect of laminate thickness on the fracture behavior of laminated graphite epoxy (T300/5208) composites was studied. The predominantly experimental research program included the study of the 0/+ or - 45/90 sub ns and 0/90 sub ns laminates with thickness of 8, 32, 64, 96 and 120 plies and the 0/+ or - 45 sub ns laminate with thickness of 6, 30, 60, 90 and 120 plies. The research concentrated on the measurement of fracture toughness utilizing the center-cracked tension, compact tension and three point bend specimen configurations. The development of subcritical damage at the crack tip was studied nondestructively using enhanced X-ray radiography and destructively using the laminate deply technique. The test results showed fracture toughness to be a function of laminate thickness. The fracture toughness of the 0 + or - 45/90 sub ns and 0/90 sub ns laminates decreased with increasing thickness and asymptotically approached lower bound values of 30 ksi square root of in. (1043 MPa square root of mm and 25 ksi square root of in (869 MPa square root of mm respectively. In contrast to the other two laminates, the fracture toughness of the 0/+ or - 45 sub ns laminate increased sharply with increasing thickness but reached an upper plateau value of 40 ksi square root of in (1390 MPa square root of mm) at 30 plies. Fracture toughness was independent of crack size for both thin and thick laminates for all three laminate types except for the 0/90 sub 2s laminate which spilt extensively. The center cracked tension, three point bend and compact tension specimens gave comparable results
A Guide to Disability Statistics from the National Health Interview Survey
The purpose of this paper is to examine the information on the population with disabilities in a nationally representative survey conducted by the National Center on Health Statistics called the National Health Interview Survey (NHIS). The paper provides a description of the disability information available in the NHIS and how the data may be used to assess the employment, economic well being and health of the population. Descriptive statistics from the 2002 NHIS public use files are used to illustrate the type of analysis that will be useful to researchers and policymakers
Surface crack analysis applied to impact damage in a thick graphite-epoxy composite
The residual tensile strength of a thick graphite/epoxy composite with impact damage was predicted using surface crack analysis. The damage was localized to a region directly beneath the impact site and extended only part way through the laminate. The damaged region contained broken fibers, and the locus of breaks in each layer resembled a crack perpendicular to the direction of the fibers. In some cases, the impacts broke fibers without making a visible crater. The impact damage was represented as a semi-elliptical surface crack with length and depth equal to that of the impact damage. The maximum length and depth of the damage were predicted with a stress analysis and a maximum shear stress criterion. The predictions and measurements of strength were in good agreement
Coherent energy migration in solids: Determination of the average coherence length in one‐dimensional systems using tunable dye lasers
The coherent nature of energy propagation in solids at low temperatures was established from the time resolved response of the crystal to short optical pulses obtained from a dye laser (pumped by a nitrogen gas laser). The trapping and detrapping of the energy by shallow defects (x traps) was evident in the spectra and enabled us to extract the coherence length: l≳700 Å=186 molecules for the one‐dimensional triplet excitons of 1,2,4,5‐tetrachlorobenzene crystals at T<4.2° K. This length which clearly exceeds the stochastic random walk limit is related to the thermalization mechanisms in this coupled exciton–trap system, and its magnitude supports the notion that exciton–phonon coupling is responsible for the loss of coherence on very long molecular chains (trap concentration is 1/256 000)
Analysis of a Very Massive DA White Dwarf via the Trigonometric Parallax and Spectroscopic Methods
By two different methods, we show that LHS 4033 is an extremely massive white
dwarf near its likely upper mass limit for destruction by unstable electron
captures. From the accurate trigonometric parallax reported herein, the
effective temperature (T=10,900 K) and the stellar radius (R=0.00368 R_sun) are
directly determined from the broad-band spectral energy distribution -- the
parallax method. The effective temperature and surface gravity are also
estimated independently from the simultaneous fitting of the observed Balmer
line profiles with those predicted from pure-hydrogen model atmospheres -- the
spectroscopic method (T=10,760 K, log g=9.46). The mass of LHS 4033 is then
inferred from theoretical mass-radius relations appropriate for white dwarfs.
The parallax method yields a mass estimate of 1.310--1.330 M_sun, for interior
compositions ranging from pure magnesium to pure carbon, respectively, while
the spectroscopic method yields an estimate of 1.318--1.335 M_sun for the same
core compositions. This star is the most massive white dwarf for which a robust
comparison of the two techniques has been made.Comment: 17 pages, including 4 figures, Accepted for Ap.
HST Photometry for the Halo Stars in the Leo Elliptical NGC 3377
We have used the ACS camera on HST to obtain (V,I) photometry for 57,000
red-giant stars in the halo of the Leo elliptical NGC 3377. We use this sample
of stars to derive the metallicity distribution function (MDF) for its halo
field stars, and comment on its chemical evolution history compared with both
larger and smaller E galaxies. Our ACS/WFC field spans a radial range extending
from 4 to 18 kpc projected distance from the center of NGC 3377 and thus covers
a significant portion of this galaxy's halo. We find that the MDF is broad,
reaching a peak at [m/H] ~ -0.6. It may, in addition, have relatively few
stars more metal-rich than [m/H] = -0.3$, although interpretation of the
high-metallicity end of the MDF is limited by photometric completeness that
affects the detection of the reddest, most metal-rich stars. NGC 3377 appears
to have an enrichment history intermediate between those of normal dwarf
ellipticals and the much larger giants. As yet, we find no clear evidence that
the halo of NGC 3377 contains a significant population of ``young'' (< 3 Gy)
stars.Comment: 40 pages, 17 figure
Avionics test bed development plan
The plan is for a facility for the early investigation and evaluation of new concepts for the control of large space structures, orbiter attached flex body experiments, and orbiter enhancements. This plan outlines a distributed data processing facility that will utilize the current JSC laboratory resources for the test bed development. The future studies required for implementation, the management system for project control, and the baseline system configuration are described
- …