112 research outputs found
Why does wurtzite form in nanowires of III-V zinc-blende semiconductors?
We develop a nucleation-based model to explain the formation of the wurtzite
(WZ) crystalline phase during the vapor-liquid-solid growth of free-standing
nanowires of zinc-blende (ZB) semiconductors. We first show that, in nanowires,
nucleation generally occurs at the outer edge of the solid/liquid interface
(the triple phase line) rather than elsewhere at the solid/liquid interface. In
the present case, this entails major differences between ZB and WZ nuclei.
Depending on the pertinent interface energies, WZ nucleation is favored at high
liquid supersaturation. This explains our systematic observation of ZB during
the early stages of nanowire growth.Comment: 4 pages with 4 figures Submitted to Physical Review Letter
Quasi one-dimensional transport in single GaAs/AlGaAs core-shell nanowires
We present an original approach to fabricate single GaAs/AlGaAs core-shell
nanowire with robust and reproducible transport properties. The core-shell
structure is buried in an insulating GaAs overlayer and connected as grown in a
two probe set-up using the highly doped growth substrate and a top diffused
contact. The measured conductance shows a non-ohmic behavior with temperature
and voltage-bias dependences following power laws, as expected for a quasi-1D
system
Quantitative Assessment of Carrier Density by Cathodoluminescence (2): GaAs nanowires
Precise control of doping in single nanowires (NWs) is essential for the
development of NW-based devices. Here, we investigate a series of MBE-grown
GaAs NWs with Be (p-type) and Si (n-type) doping using high-resolution
cathodoluminescence (CL) mapping at low- and room-temperature. CL spectra are
analyzed selectively in different regions of the NWs. Room-temperature
luminescence is fitted with the generalized Planck's law and an absorption
model, and the bandgap and band tail width are extracted. For Be-doped GaAs
NWs, the bandgap narrowing provides a quantitative determination of the hole
concentration ranging from about to
cm, in good agreement with the targeted doping levels. For Si-doped GaAs
NWs, the electron Fermi level and the full-width at half maximum of
low-temperature CL spectra are used to assess the electron concentration to
approximately to cm. These findings
confirm the difficulty to reach highly-doped n-type GaAs NWs, may be due to
doping compensation. Notably, signatures of high concentration (5-9 cm) at the very top of NWs are unveiled
Spectroscopic Ellipsometry Analysis of Rapid Thermal Annealing Effecton MBE Grown GaAs1−x −Nx, Journal of Telecommunications and Information Technology, 2009, nr 1
We report on the effect of rapid thermal annealing (RTA) on GaAs1−x−Nx layers, grown by molecular beam epitaxy (MBE), using room temperature spectroscopic ellipsometry (SE). A comparative study was carried out on a set of GaAs1−x−Nx as-grown and the RTA samples with small nitrogen content (x = 0.1%, 0.5% and 1.5%). Thanks to the standard critical point model parameterization of the GaAs1−x−Nx extracted dielectric functions, we have determined the RTA effect, and its nitrogen dependence. We have found that RTA affects more samples with high nitrogen content. In addition, RTA is found to decrease the E1 energy nitrogen blueshift and increase the broadening parameters of E1, E1+Δ1, E′0 and E2 critical points
GaN/Ga2O3 Core/Shell Nanowires Growth: Towards High Response Gas Sensors
International audienceThe development of sensors working in a large range of temperature is of crucial importance in areas such as monitoring of industrial processes or personal tracking using smart objects. Devices integrating GaN/Ga2O3 core/shell nanowires (NWs) are a promising solution for monitoring carbon monoxide (CO). Because the performances of sensors primarily depend on the material properties composing the active layer of the device, it is essential to control them and achieve material synthesis in the first time. In this work, we investigate the synthesis of GaN/Ga2O3 core-shell NWs with a special focus on the formation of the shell. The GaN NWs grown by plasma-assisted molecular beam epitaxy, are post-treated following thermal oxidation to form a Ga2O3-shell surrounding the GaN-core. We establish that the shell thickness can be modulated from 1 to 14 nm by changing the oxidation conditions and follows classical oxidation process: A first rapid oxide-shell growth, followed by a reduced but continuous oxide growth. We also discuss the impact of the atmosphere on the oxidation growth rate. By combining XRD-STEM and EDX analyses, we demonstrate that the oxide-shell is crystalline, presents the β-Ga2O3 phase, and is synthesized in an epitaxial relationship with the GaN-core
Quantitative Assessment of Carrier Density by Cathodoluminescence (1): GaAs thin films and modeling
Doping is a fundamental property of semiconductors and constitutes the basis
of modern microelectronic and optoelectronic devices. Their miniaturization
requires contactless characterization of doping with nanometer scale
resolution. Here, we use low- and room-temperature cathodoluminescence (CL)
measurements to analyze p-type and n-type GaAs thin films over a wide range of
carrier densities ( to cm). The
spectral shift and broadening of CL spectra induced by shallow dopant states
and band filling are the signature doping. We fit the whole spectral lineshapes
with the generalized Planck's law and refined absorption models to extract the
bandgap narrowing (BGN) and the band tail for both doping types, and the
electron Fermi level for n doping. This work provides a rigorous method for the
quantitative assessment of p-type and n-type carrier density using CL. Taking
advantage of the high spatial resolution of CL, it can be used to map the
doping in GaAs nanostructures, and it could be extended to other semiconductor
materials.Comment: Supplemental Materia
Towards a monolithic optical cavity for atom detection and manipulation
We study a Fabry-Perot cavity formed from a ridge waveguide on a AlGaAs
substrate. We experimentally determined the propagation losses in the waveguide
at 780 nm, the wavelength of Rb atoms. We have also made a numerical and
analytical estimate of the losses induced by the presence of the gap which
would allow the interaction of cold atoms with the cavity field. We found that
the intrinsic finesse of the gapped cavity can be on the order of F ~ 30,
which, when one takes into account the losses due to mirror transmission,
corresponds to a cooperativity parameter for our system C ~ 1
- …