90 research outputs found
High Speed Roll-to-Roll Printable Transistor Enabled by a Pulsed Light Curable CNT Ink
This paper reports the first high speed roll-to-roll printable transistor using a carbon nanotube (CNT) semiconducting layer. The transistor is made possible through the development of a pulsed light curable CNT ink compatible with typical drop on demand inkjet cartridges. This CNT ink uses a xylene based solvent with methanol, glycerin, and Triton X-100 modifiers to create an evaporable solution with appropriate absorption spectra for a mercury or xenon flash lamp with strong energy transmission in the UVB to mid visible light range, allowing the solution to absorb the energy from the flash lamp and evaporate. Transistor dimensions were defined by the capabilities of a typical roll-to-roll drop on demand cartridge. The final device demonstrated an on/off ratio of 104, representing performance similar to gravure printed devices. This represents the first CNT ink which can be used in high speed production methods without long thermal curing steps in the workflow
Recommended from our members
Highly dispersive photonic crystal fibers for optical true time delay (TTD) based X-Band phased array antenna
textPhased array antenna (PAA) is a key component in many of the modern military and commercial radar and communication systems requiring highly directional beams with narrow beam widths. One of the advantages that this technology offers is a physical movement-free beam steering. Radar and communication technologies also require the PAA systems to be compact, light weight, demonstrate high bandwidth and electromagnetic interference (EMI) free performance. Conventional electrical phase shifters are inherently narrowband. This calls for technologies that have a larger bandwidth and high immunity to electromagnetic interference. Optical true-time-delay (TTD) technique is an emerging technology that is capable of providing these features along with the ability to provide frequency independent beam steering. Photonic crystal fiber (PCF) based optical TTD lines are capable of providing precise and continuous time delays required for PAA systems. Photonic crystal fibers are a new class of optical fibers with a periodic arrangement of air-holes around a core that can be designed to provide extraordinary optical characteristics which are unrealizable using conventional optical fibers. In this dissertation, highly dispersive photonic crystal fiber structures based on index-guidance and bandgap-guidance were designed. Designs exhibiting dispersion coefficients as large as -9500ps/nm/km and 4000ps/nm/km at 1550nm were presented. A TTD module utilizing a fabricated highly dispersive PCF with a dispersion coefficient of -600ps/nm/km at 1550nm was formed and characterized. The module consisted of 4 delay lines employing highly dispersive PCFs connected with various lengths of non-zero dispersion shifted fibers. By employing PCFs with enhanced dispersion coefficients, the TTD module size can be proportionally reduced. A 4-element linear X-band PAA system using the PCF-TTD module was formed and characterized to provide continuous time delays to steer radiofrequency (RF) beams from -41 degrees to 46 degrees by tuning the wavelength from 1530nm to 1560nm. Using the PCF-TTD based X-Band PAA system, single and simultaneous multiple beam transmission and reception capabilities were demonstrated. Noise and distortion performance characteristics of the entire PAA system were also evaluated and device control parameters were optimized to provide maximum spurious-free-dynamic range. In order to alleviate computational and weight requirements of practical large PAA systems, a sparse array instead of a standard array needs to be used. X-Band sparse array systems using PCF and dispersive fiber TTD technique were formed and RF beam steering was demonstrated. As an important achievement during the research work, the design and fabricated structure of a PCF currently reported to have the highest dispersion coefficient of -5400ps/nm/km at 1549nm, along with its limitations was also presented. Finally, other interesting applications of highly dispersive PCFs in the areas of pulse compression and soliton propagation were explored.Electrical and Computer Engineerin
Towards the Design of a Wideband Reflective Long Period Grating Distributed Sensor
In this paper, we computationally investigate the effects of metal coating length and coating coverage on the reflected spectrum of a long period grating (LPG) over a broad bandwidth. Simulation results indicate that coating the tail end of the fiber between the LPG and the end facet of the fiber provides a reflected spectrum that mimics the LPG transmission spectrum shape over a 400 nmbandwidth. Based on single LPG simulation results, we present the design of a distributed LPG structure containing a multiple number (n) of LPGs in reflection mode for the first time. Simulation results for n = 1, 2, and 3 are presented here to demonstrate the concept of a distributed reflective LPG design. It is expected that such a sensor will open a new window for distributed sensing using reflective LPGs
Experimental Validation of a Reflective Long Period Grating Design Methodology
In this work, we present an experimental demonstration of our previously published modeling work on reflective long period grating (LPG). To provide the practical realization of the modeling work, we coat a long segment of fiber both in the tail length and the end facet beyond the gratings with silver to invert the transmission mode LPG to reflection mode LPG. We then measure the LPG characteristics in both the transmission and reflection mode and validate our findings from modeling work. We further build temperature and refractive index (RI) sensors and demonstrate temperature sensing from 21 °C to 191 °C with similar temperature sensitivity coefficients of 54.4 ± 2.9 pm/°C and 53.2 ± 2.6 pm/°C for transmission and reflection mode LPG, respectively whereas same RI sensitivity coefficient of 370 ± 2.2 nm/RIU
Real-Time Measurement of Parametric Influences on the Refractive Index and Length Changes in Silica Optical Fibers
In this paper, we present a simple cascaded Fabry-Perot interferometer (FPI) that can be used to measure in real-time the refractive index (RI) and length variation in silica optical fibers caused due to external physical parameters, such as temperature, strain, and radiation. As a proof-of-concept, we experimentally demonstrate real-time monitoring of temperature effects on the RI and length and measure the thermo-optic coefficient (TOC) and thermal expansion coefficient (TEC) by using the cascaded FPI within a temperature range of 21–486°C. The experimental results provide a TEC of 5.53 × 10−7 /°C and TOC of 4.28 × 10−6 /°C within the specified temperature range. Such a simple cascaded FPI structure will enable the design of optical sensors to correct for measurement errors by understanding the change in RI and length of optical fiber caused by environment parameters
- …