31 research outputs found
Exploring the anticancer and antibacterial potential of naphthoquinone derivatives: a comprehensive computational investigation
This study investigates the potential of 2-(4-butylbenzyl)-3-hydroxynaphthalene-1,4-dione (11) and its 12 derivatives as anticancer and biofilm formation inhibitors for methicillin-resistant staphylococcus aureus using in silico methods. The study employed various computational methods, including molecular dynamics simulation molecular docking, density functional theory, and global chemical descriptors, to evaluate the interactions between the compounds and the target proteins. The docking results revealed that compounds 9, 11, 13, and ofloxacin exhibited binding affinities of −7.6, −7.9, −7.5, and −7.8 kcal mol−1, respectively, against peptide methionine sulfoxide reductase msrA/msrB (PDB: 3E0M). Ligand (11) showed better inhibition for methicillin-resistant staphylococcus aureus msrA/msrB enzyme. The complex of the 3E0M-ligand 11 remained highly stable across all tested temperatures (300, 305, 310, and 320 K). Principal Component Analysis (PCA) was employed to evaluate the behavior of the complex at various temperatures (300, 305, 310, and 320 K), demonstrating a total variance of 85%. Convergence was confirmed by the eigenvector’s cosine content value of 0.43, consistently displaying low RMSD values, with the minimum observed at 310 K. Furthermore, ligand 11 emerges as the most promising candidate among the compounds examined, showcasing notable potential when considering a combination of in vitro, in vivo, and now in silico data. While the naphthoquinone derivative (11) remains the primary candidate based on comprehensive in silico studies, further analysis using Frontier molecular orbital (FMO) suggests while the Egap value of compound 11 (2.980 eV) and compound 13 (2.975 eV) is lower than ofloxacin (4.369 eV), indicating their potential, so it can be a statement that compound 13 can also be investigated in further research
Utilizing photothermally induced oscillation damping parameters for the determination of bacterial load suspended in microfluidic resonators
Microchannel resonators containing a miniaturized volume of a solution can have various applications in different fields. In this study, a microchannel cantilever was loaded with a solution containing a very small number of Pseudomonas fluorescens bacteria suspended in M9 growth medium. The liquid-filled microchannel cantilever was irradiated with a 532-nm laser. The shift in the frequency of the cantilever due to varying bacterial loads is less reliable; therefore, it could not be used for monitoring the bacterial concentration. The energy loss of the cantilever extracted from the quality factor exhibited reliable results and a very strong correlation with the bacterial concentration. The results showed a linear relation between the damping factor of the cantilever and the bacterial concentration. Accordingly, these findings were expected because the bacteria inside the solution can be considered as particles acting against the cantilever motion due to the solution’s viscosity. Thus, more bacteria caused more damping, in agreement with the experimental observations. A semiquantitative experiment was conducted with a heat source (i.e., laser beam) that focused at the cantilever tip to demonstrate the redistribution of the bacterial load within the solution due to the thermal gradient
Graphene oxide integrated silicon photonics for detection of vapour phase volatile organic compounds
From Springer Nature via Jisc Publications RouterHistory: received 2020-01-07, accepted 2020-05-17, registration 2020-05-20, pub-electronic 2020-06-12, online 2020-06-12, collection 2020-12Publication status: PublishedAbstract: The optical response of a graphene oxide integrated silicon micro-ring resonator (GOMRR) to a range of vapour phase Volatile Organic Compounds (VOCs) is reported. The response of the GOMRR to all but one (hexane) of the VOCs tested is significantly higher than that of the uncoated (control) silicon MRR, for the same vapour flow rate. An iterative Finite Difference Eigenmode (FDE) simulation reveals that the sensitivity of the GO integrated device (in terms of RIU/nm) is enhanced by a factor of ~2, which is coupled with a lower limit of detection. Critically, the simulations reveal that the strength of the optical response is determined by molecular specific changes in the local refractive index probed by the evanescent field of the guided optical mode in the device. Analytical modelling of the experimental data, based on Hill-Langmuir adsorption characteristics, suggests that these changes in the local refractive index are determined by the degree of molecular cooperativity, which is enhanced for molecules with a polarity that is high, relative to their kinetic diameter. We believe this reflects a molecular dependent capillary condensation within the graphene oxide interlayers, which, when combined with highly sensitive optical detection, provides a potential route for discriminating between different vapour phase VOCs
Recommended from our members
Atomic-level passivation mechanism of ammonium salts enabling highly efficient perovskite solar cells.
The high conversion efficiency has made metal halide perovskite solar cells a real breakthrough in thin film photovoltaic technology in recent years. Here, we introduce a straightforward strategy to reduce the level of electronic defects present at the interface between the perovskite film and the hole transport layer by treating the perovskite surface with different types of ammonium salts, namely ethylammonium, imidazolium and guanidinium iodide. We use a triple cation perovskite formulation containing primarily formamidinium and small amounts of cesium and methylammonium. We find that this treatment boosts the power conversion efficiency from 20.5% for the control to 22.3%, 22.1%, and 21.0% for the devices treated with ethylammonium, imidazolium and guanidinium iodide, respectively. Best performing devices showed a loss in efficiency of only 5% under full sunlight intensity with maximum power tracking for 550 h. We apply 2D- solid-state NMR to unravel the atomic-level mechanism of this passivation effect
Extracting mechanical and microstructural properties of Cu–Zr thin film alloys by MEMS, AFM and ellipsometer
The quantification of the atomic concentration ratios of thin-film metallic alloys having low atomic ordering is challenging, particularly if they are grown on similar metals and possess different surface chemistries. Micromechanical and optical methods have been used to correlate the elemental ratios with the mechanical and optical properties of the films. The room-temperature growth of Cu–Zn thin-film alloys with varying elemental ratios on cosputtered Si substrates was performed to obtain an amorphous film structure. X-ray diffraction patterns confirmed that the grown films exhibited a very short range ordering, suggesting an amorphous structure. The mechanical properties of the films evaluated using microelectromechanical system (MEMS) indicated that the alloy films with moderate Zr concentrations had lower surface stress compared to those with low and high Zr concentrations. Furthermore, spectroscopic ellipsometry was employed to qualitatively assess the relaxation times of free carriers. The results demonstrated a strong correlation between the relaxation times and surface roughness measurements, showing that the microstructure and resistivity characteristics of the alloys align with the Nordheim semiempirical model. The extinction coefficient of the binary alloy film linearly depends on the metallic bulk concentration ratio in a specific metallic ratio range, paving the way for realizing qualitative elemental percentage assessment in the field of metrology
Effect of surface patterning using femtosecond laser on micromechanical and structural properties of micromechanical sensors
A femtosecond laser can be used to fabricate microstructures on a silicon microcantilever surface with high precession and minimal sidewall defects. The aim of this study is to investigate the effect of the creation of microgrooves and sub-microgrooves on the resonance frequency, quality factor, and spring constant of a silicon microcantilever. A single pass of a femtosecond laser with a wavelength of 1026 nm was used to fabricate microgrooves on the microcantilever surface. Different numbers of microgrooves were fabricated on each microcantilever using the femtosecond laser micromachining technique. The separation distance between the center of the two microgrooves was 7 μ m. The microstructure of the fabricated microgrooves was investigated through field emission electron microscopy. The resonance frequency increased with the number of microgrooves, but the quality factor of the patterned microcantilever was higher than that of the unpatterned microcantilever. The spring constant increased with the number of microgrooves, increasing from 18.96 to 38.04 mN/m for microcantilevers with 1 and 7 microgrooves, respectively
Transient Liquid Phase Bonding of Ti-6Al-4V and Mg-AZ31 Alloys Using Zn Coatings
Ti-6Al-4V and Mg-AZ31 were bonded together using the Transient Liquid Phase Bonding Process (TLP) after coating both surfaces with zinc. The zinc coatings were applied using the screen printing process of zinc paste. Successful bonds were obtained in a vacuum furnace at 500 °C and under a uniaxial pressure of 1 MPa using high frequency induction heat sintering furnace (HFIHS). Various bonding times were selected and all gave solid joints. The bonds were successfully achieved at 5, 10, 15, 20, 25, and 30 min. The energy dispersive spectroscopy (EDS) line scan confirmed the diffusion of Zn in both sides but with more diffusion in the Mg side. Diffusion of Mg into the joint region was detected with significant amounts at bonds made for 20 min and above, which indicate that the isothermal solidification was achieved. In addition, Ti and Al from the base alloys were diffused into the joint region. Based on microstructural analysis, the joint mechanism was attributed to the formation of solidified mixture of Mg and Zn at the joint region with a presence of diffused Ti and Al. This conclusion was also supported by structural analysis of the fractured surfaces as well as the analysis across the joint region. The fractured surfaces were analyzed and it was concluded that the fractures occurred within the joint region where ductile fractures were observed. The strength of the joint was evaluated by shear test and found that the maximum shear strength achieved was 30.5 MPa for the bond made at 20 min
Diffusion Bonding of Al7075 to Ti-6Al-4V by Spark Plasma Sintering and Using a Copper Interlayer
Sheets of aluminum 7075 and titanium Ti-6Al-4V alloys were successfully joined using the spark plasma sintering (SPS) process. A copper foil was placed as an interlayer between the two surfaces. The bonding was made at 480 °C, 500 °C, and 520 °C with a holding time of 10 min and under a uniaxial pressure of 5 MPa and 10 MPa. The obtained bonds were analyzed by scanning electron microscopy, energy dispersive spectroscopy (SEM/EDS), and wavelength dispersive spectroscopy (WDS). It was found that copper diffused away through Al7075 and formed Al2Cu intermetallics but was not present at the joint region. The investigation of the fractured surfaces using X-ray diffraction (XRD) showed that the joint region contained TiAl3, TiAl2, and Ti3Al intermetallic compounds. The presence of the Cu foil was believed to hinder the formation of Al3Ti observed in previous studies by allowing more Ti to diffuse into the Al side
Modeling the mechanical response of microelectromechanical system (MEMS)-based sensors to volatile alcohol vapors: A finite element analysis
The development of microelectromechanical system-based sensors, such as microcantilever sensors, has garnered considerable interest across various fields. Notably, there is a significant focus on the detection of volatile alcohol vapors, which holds promise in mitigating breath-related illnesses. This study employed finite element analysis to simulate the deflection of a silica-based microcantilever coated with polymethyl methacrylate in response to different volatile alcohol vapors (VAVs), such as methanol, ethanol, and isopropanol. A Multiphysics framework was used to analyze the time-dependent response of a microcantilever to different concentrations of VAVs incorporating fluid–structure interaction. This complex model integrated the aspects of laminar flow, solid mechanics, and transport of dilute species. Significant agreement has been achieved between finite element analysis-simulated results and the experimental findings that we had previously documented. This alignment revealed consistent trends, with methanol exhibiting higher levels than ethanol, followed by isopropanol, further validating the robustness and reliability of the sensor system in VAV detection