93 research outputs found

    Status of the "TEU-FEL" project

    Get PDF
    The free-electron laser of the TEU-FEL project will be realized in two phases. In phase I the FEL will be driven by a 6 MeV photoelectric linac. In phase II the linac will be used as an injector for a 25 MeV race-track microtron. Information is presented on some technical details and the status of the different subsystems

    Proposal for a race-track microtron with high peak current

    Get PDF
    In order to obtain high gain in a free electron laser a high-quality electron beam with high peak current is required. It is well-known that a microtron is able to produce a high-quality beam having low emittance and small energy spread (1%). Because a circular microtron has a limited high-current capability a race-track design is adopted for providing flexibility, better beam quality and of course higher peak current in the microbunch. Space charge problems may be severe in a microtron. It can be shown that bunching on certain specific subharmonic frequencies will lead to a strong reduction of the space charge problems. The general layout of our microtron design will be presented. The characteristics are: energy 25 MeV, micropulse 10° of the rf frequency of 3 GHz. Our aim is to come beyond the present state of the art with the following characteristics: relative energy spread 0.001, emittance 3 mm mrad, current in the micropulse 100 A, macropulse length 50 μs and subharmonic bunching at 1:64

    Developments of the TEUFEL injector racetrack microtron

    Get PDF
    In this paper we report on developments of the 25 MeV racetrack microtron (RTM) that will be the electron source for the second phase of the TEUFEL project, to generate radiation of 10 µm in a 2.5 cm period hybrid undulator. The theoretical understanding of this unconventional, azimuthally varying field type of RTM has been extended. A comparison of analytically calculated orbit stability with that based on measured data will be presented; orbit calculations using measured field data show the designed performance. Construction and tuning of the 1300 MHz, 2.2 MV microwave cavity have been completed, and signal level measurements have been performed. The overall assembly of the microtron is nearing completion. At present a vacuum pressure better than 5 × 10-7 Torr is achieved

    An Irradiation Production Unit for Polymer Research

    Get PDF
    Electron irradiation is a well known method in polymer research for studying polymer structure changes. Using an existing 6 MeV linear accelerator a general irradiation facility has been built which is especially suited for this purpose. The monitored dose is variable between 5 and 300 kGy and may be evenly distributed over the sample, with a typical size of 10x10x0.5 cm3. The linac macro pulse frequency is in the range of 1 to 50 Hz and the maximum irradiation duration is in the order of minutes. Regarding sample conditions: the temperature can be controlled between 20 and 300 oC in an environment of pure nitrogen. The control system has been modernised using a PLC controller together with a visualisation program (Intouchâ). Distributing the dose over the sample is realised either by sweeping the beam in the vertical direction using a bending magnet and moving the sample in the horizontal direction, or with the help of a permanent quadrupole magnet, inserted in the beam guiding system

    The "TEU-FEL" project

    Get PDF
    The free-electron laser of the TEU-FEL project will be based on a 6 MeV photo-cathode linac as injector, a 25 MeV race-track microtron as main accelerator and a hybrid, 25 mm period undulator. The project will be carried out in two phases. In phase one only the 6 MeV linac will be used, The FEL will then produce tunable radiation around 200 µm. In phase two the linac will be used as an injector for the microtron. The FEL will then produce tunable radiation around 10 µm. Technical information will be presented on the different subsystems

    Past, present and future of the telecommunications industry

    Get PDF
    Item does not contain fulltex

    The injector microtron for the TEUFEL infrared laser

    Get PDF
    Progress is reported on a 25 MeV injector racetrack microtron for a 10 ¿m radiation free electron laser (TEUFEL project). The accelerator exhibits transverse focusing in 180° inhomogeneous two-sector dipole magnets which are slightly rotated with respect to each other in the bending plane. This provides closed orbits, isochronism and a large transverse acceptance. Details on this unconventional microtron focusing system will be given. An analytical treatment, based on conformal mapping, of the field near pole boundaries and at the hill-valley boundaries in the microtron dipole is compared with Poisson calculated results and with field measurements. The design of a model accelerating cavity is presented together with field measurements based on the perturbation ball method

    Design and Performance of a Permanent Magnetic Quadrupole for a Low Energy Linear Accelerator Beam Line

    Get PDF
    Permanent magnets which show the highest magnetic flux density, have been used in constructing an insertable Permanent Magnetic Quadrupole (PMQ). The PMQ is part of an electron irradiation facility for polymer research at the Eindhoven University of Technology. For polymer irradiation that requires a homogeneous dose distribution, the PMQ is inserted and the expanded electron beam will irradiate the target completely. Design criteria of the quadrupole are discussed. The quadrupole geometry has been optimised using CEDRAT finite element software. The influence of mechanical alignment errors (0.15 mm) and variations in permanent magnet properties (0.5%) on the magnetic field have been simulated. Sixteen NdFeB magnets (42x42x10 mm3) have been used to produce a quadrupole with an aperture radius of 50 mm. Before insertion, the magnetic flux density of all magnets has been determined versus magnetic field and temperature. After construction the lens strength of the quadrupole has been determined using the floating wire technique. The flux density has been measured using a Hall probe. Results show a magnetic field gradient that varies less than 0.5% within a radius of 25 mm. Alignment errors have been determined comparing simulation and measurement
    corecore