Aptamer-based impedimetric determination of the human blood clotting factor IX in serum using an interdigitated electrode modified with a ZnO nanolayer

This article describes a sensitive impedimetric method for the determination of human blood coagulation factor IX protein (FIX) which is present in extremely low concentration in serum. An interdigitated electrode (IDE) whose surface was layered with zinc oxide was modified with two kinds of probes. One is an antibody, the other an aptamer against FIX. A comparative study between anti-FIX aptamer and anti-FIX antibody showed the aptamer to possess higher affinity for FIX. A sandwich aptamer assay was worked out by using the FIX-binding aptamer on the surface of the IDE. It has a detection limit as low as 10 pM which makes it 4 to 30-fold more sensitive than any other method reported for FIX. Moreover, to practice detection in clinical samples, FIX was detected from the human blood serum by spiking. In our perception, the sensitivity of the ZnO-modified IDE presented here makes it a promising tool for sensing clinically relevant analytes that are present in very low (sub-pM) concentrations

Thickness Dependent Nanostructural, Morphological, Optical and Impedometric Analyses of Zinc Oxide-Gold Hybrids: Nanoparticle to Thin Film.

The creation of an appropriate thin film is important for the development of novel sensing surfaces, which will ultimately enhance the properties and output of high-performance sensors. In this study, we have fabricated and characterized zinc oxide (ZnO) thin films on silicon substrates, which were hybridized with gold nanoparticles (AuNPs) to obtain ZnO-Aux (x = 10, 20, 30, 40 and 50 nm) hybrid structures with different thicknesses. Nanoscale imaging by field emission scanning electron microscopy revealed increasing film uniformity and coverage with the Au deposition thickness. Transmission electron microscopy analysis indicated that the AuNPs exhibit an increasing average diameter (5-10 nm). The face center cubic Au were found to co-exist with wurtzite ZnO nanostructure. Atomic force microscopy observations revealed that as the Au content increased, the overall crystallite size increased, which was supported by X-ray diffraction measurements. The structural characterizations indicated that the Au on the ZnO crystal lattice exists without any impurities in a preferred orientation (002). When the ZnO thickness increased from 10 to 40 nm, transmittance and an optical bandgap value decreased. Interestingly, with 50 nm thickness, the band gap value was increased, which might be due to the Burstein-Moss effect. Photoluminescence studies revealed that the overall structural defect (green emission) improved significantly as the Au deposition increased. The impedance measurements shows a decreasing value of impedance arc with increasing Au thicknesses (0 to 40 nm). In contrast, the 50 nm AuNP impedance arc shows an increased value compared to lower sputtering thicknesses, which indicated the presence of larger sized AuNPs that form a continuous film, and its ohmic characteristics changed to rectifying characteristics. This improved hybrid thin film (ZnO/Au) is suitable for a wide range of sensing applications

Schematic illustration of chemical functionalization on the PSNG surface.

<p>(a) Hydroxylation of the PSNG surface by Fenton reaction. (b) Application of the APTES cross-linker to establish amine terminated groups. (c) A prepared hCGab probe immobilized on the PSNG electrode. (d) hCG target binding with urine or reference samples. Signal transduction was analyzed in AC and DC measurements.</p