331 research outputs found
Structure and magnetic properties of Co/CoO and Co/Si core-shell cluster assemblies prepared via gas-phase
Plasma-gas condensation cluster deposition systems have been introduced and applied for preparation of Co/CoO and Co/Si clusters assemblies. In Co/CoO cluster assemblies prepared by the single source PGC system with introduction of O-2 gas into the deposition chamber, fee Co cores are covered with NaCl type CoO shells, showing marked enhancement of unidirectional and uniaxial magnetic anisotropy and a clear cross-over phenomenon in the magnetic relaxation from the high temperature thermal regime to the low temperature quantum tunneling regime. In Co/Si cluster assemblies prepared by the double source PGC system, fee Co cores are also covered with amorphous Si rich shells, showing rather small magnetic coercivity. Since Co/CoO and Co/Si core-shell clusters are stable in ambient atmosphere, they will be used as building blocks for novel nano-structure-controlled materials. (c) 2004 Elsevier Ltd. All rights reserved
Magnetic-Field- and Temperature-Dependent Characteristics of Fe/Cu Granular Films Produced by Sputter- and Cluster-Beam-Deposition(Research in High Magnetic Fields)
The magnetoresistance (MR) and magnetization (M) have been measured as functions of temperature, T, and magnetic field, H, in sputter(SP)- and cluster-beam(CB)-deposited Fe_XCu_ alloys. The MR for the SP-deposited Fe_Cu_ film exhibits a maximum at around the Curie temperature (T_C=150 K) and increases rapidly below 100 K owing to a spin-glass transition. For the CB-deposited granular Fe-Cu films with low Fe content, the MR is also enhanced at low temperatures being attributable to a cluster-glass behavior of small fcc Fe clusters. At low temperatures, moreover, a T^ dependence is found for both MR and M versus T curves. For the SP-deposited Fe_Cu_ sample, the T^ coefficient of the MR roughly corresponds with that of the M. For the CB-deposited Fe_Cu_ sample, however, they are inconsistent each other. These results originate from different status of the Fe atoms : the Fe atoms are rather randomly dispersed in the Cu matrices in the SP-deposited sample, while they form clusters in the CB-deposited one
Evidence for Adiabatic Magnetization of cold Dy_N Clusters
Magnetic properties of Dy_N clusters in a molecular beam generated with a
liquid helium cooled nozzle are investigated by Stern-Gerlach experiments. The
cluster magnetizations \mu_z are measured as a function of magnetic field (B =
0 - 1.6T) and cluster size (16 < N < 56). The most important observation is the
saturation of the magnetization \mu_z(B) at large field strengths. The
magnetization approaches saturation following the power law |\mu_z-\mu_0|
proportional to 1/\sqrt{B}, where \mu_0 denotes the magnetic moment. This gives
evidence for adiabatic magnetization.Comment: 4 pages, 3 figure
Formation and magnetic properties of Fe-Pt alloy clusters by plasma-gas condensation
Size-monodispersed FexPt1-x alloy clusters were synthesized using a plasma-gas-condensation technique which employs two separate elemental sputtering sources and a growth chamber. The composition of the alloy clusters was controlled by adjusting the ratio of the applied sputtering power. We found that high-temperature disordered fcc-FexPt1-x clusters whose mean diameters of 6-9 nm depend on the Ar gas flow ratio were formed for a wide average composition range (xapproximate to0.3-0.7), and the lattice constant of as-doposited clusters increases almost linearly with decreasing x, being extrapolated to the value of pure Pt metal. For Fe49Pt51 cluster-assembled films, high coercivity (8.8 kOe) was obtained by annealing at 600 degreesC within 10 min due to improved chemical ordering, although as-deposited cluster-assembled films have lower blocking temperatures than room temperature, and show a small coercivity value (similar to25 Oe) at room temperature due to intercluster magnetic interaction. (C) 2003 American Institute of Physics
Effects of O-2 gas on the size and structure of Cr clusters formed by plasma-gas-condensation
Cr clusters have been produced by a plasma-gas-condensation type cluster deposition apparatus, and studied using a time-of-flight mass spectrometer and a transmission electron microscope. The Cr clusters formed in high pressure inert (Ar and/or lie) gas atmosphere are of an A15-type structure. When an O-2. Ps is mixed with the inert gases in the source (sputtering) chamber, a bcc phase is formed together with Cr2O3. The O-2 gas introduction leads to an increase in the gas temperature of the source chamber probably due to release of the formation enthalpy of the oxide. The A15 phase is annealed by such excess heat and becomes the equilibrium bee phase. The sizes of bee clusters are smaller than those of the A15-clusters, probably due to the heterogeneous nucleation promoted by the oxide formation
Structure and magnetic properties of FePt alloy cluster-assembled films
We studied structure and magnetic properties of FexPt1-x alloy clusters fabricated by a plasma-gas-condensation technique which employs two separate elemental sputtering sources and a growth chamber. Fe and Pt metal vapors generated were cooled rapidly in an Ar atmosphere, and grown into alloy clusters. Most of the as-deposited FexPt1-x alloy clusters are multiply twinned and have predominantly an icosahedral structure. The experimental results also show that there is a narrow distribution of the chemical composition among individual clusters but the Fe and Pt atoms are distributed homogeneously in as-deposited alloy clusters, which is discussed on the basis of a formation process of the alloy clusters in the inert gas-condensation process. The optimal magnetic hardening or the chemically ordered FCT FePt clusters can be achieved at proper annealing temperature for very short annealing time. (C) 2003 Elsevier B.V. All rights reserved
Exchange anisotropy of monodispersed Co/CoO cluster assemblies
Monodispersed Co/CoO cluster assemblies with the mean cluster size of 13 nm have been prepared using a plasma-gas-condensation-type cluster beam deposition apparatus. The structural analysis and magnetic measurement indicate that the Co cluster is covered by an oxide shell composed of CoO. The effect of the oxygen gas flow rate during deposition and that of temperature on the coercivity and hysteresis loop shift induced by field cooling were measured. The effect of the CoO shell on the loop shift and the temperature dependence of the exchange anisotropy are discussed. The unidirectional anisotropy is negligible above 200 K for the present assemblies. This is ascribed to the rapid decrease of the anisotropy of the antiferromagnetic interfacial layers near the inter-face of the Co cores and CoO shells
Electrical properties of oxide-coated metal (Co, Cr, Ti) cluster assemblies
Oxide-coated metal (Co, Cr and Ti) cluster assemblies whose mean cluster sizes are 8-13 nm have been fabricated by a plasma-gas-condensation type cluster beam deposition technique. With increasing oxygen gas flow rate R-O2, the oxide-coated metal cluster-assembled films exhibit a metal-nonmetal transition. In the metallic regime, the resistivity reveals In T dependence at low temperature due to weak localization of conduction electrons and/or electron-electron interactions in the disordered oxide-coated cluster-assembled films. The In T dependence still remains for the very thick oxide-coated metal-cluster-assembled films (the actual thickness t(c) = 2400 nm) which is clearly a three-dimensional system. This behavior can be interpreted by a low dimensionality of the three-dimensional oxide-coated cluster assemblies because of a porous cluster stacking and imperfect or non-uniform oxide shell
Dense Fe cluster-assembled films by energetic cluster deposition
High-density Fe cluster-assembled films were produced at room temperature by an energetic cluster deposition. Though cluster-assemblies are usually sooty and porous, the present Fe cluster-assembled films are lustrous and dense, revealing a soft magnetic behavior. Size-monodispersed Fe clusters with the mean cluster size d=9 nm were synthesized using a plasma-gas-condensation technique. Ionized clusters are accelerated electrically and deposited onto the substrate together with neutral clusters from the same cluster source. Packing fraction and saturation magnetic flux density increase rapidly and magnetic coercivity decreases remarkably with increasing acceleration voltage. The Fe cluster-assembled film obtained at the acceleration voltage of -20 kV has a packing fraction of 0.86+/-0.03, saturation magnetic flux density of 1.78+/-0.05 Wb/m(2), and coercivity value smaller than 80 A/m. The resistivity at room temperature is ten times larger than that of bulk Fe metal. (C) 2004 American Institute of Physics
- …